A Hale company - serving Enterprise, NV

How Long Does Front Door Replacement Take? Timelines and What to Expect

Last updated November 18, 2026

New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.

1

Choose your installer

The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.

Talk to a real person →

2

Select the right products

Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.

Compare the lines →

3

Prepare your home for install

Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.

Get the install checklist →

Compare the Lines We Quote

Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.

PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
  • More impact certifications than any other line we quote
  • WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
  • 99% on-time delivery keeps your install date on the calendar
See it quoted on your openings →
CGIThe heavyweight impact line$$$$$
  • Large-missile impact ratings for the strictest wind zones
  • Architectural-grade aluminum with commercial-depth frames
  • The line we quote when protection is the whole point
See it quoted on your openings →
CWSThe value pick$$
  • Vinyl systems built to strict wind codes
  • Strong energy packages at the friendliest price point
  • The smart start for whole-home replacements on a budget
See it quoted on your openings →
ESWSlim lines, big glass$$$$
  • Narrow-sightline aluminum for modern elevations
  • Oversized openings and floor-to-ceiling glass
  • Impact-rated without the bunker look
See it quoted on your openings →
ECOThe aluminum impact workhorse$$$
  • Factory-built aluminum impact systems
  • A strong price-to-protection ratio for coastal homes
  • Proven lines with short lead times
See it quoted on your openings →

How Long Does Front Door Replacement Take? Timelines and What to Expect

Ninety percent of front door replacements that drag into a second day aren’t because the job is complicated. They’re because the contractor ordered the door before anyone inspected the rough opening, and installation day turned into a surprise party nobody wanted. A skilled crew replaces a standard front door in 3 to 5 hours. If you’ve been quoted a multi-day window, something in the scope or the preparation is off. This guide breaks down the real timeline phase by phase, explains what extends a job legitimately, and shows Enterprise homeowners how to ask the right questions before anyone orders a door.

Call (866) 616-0837

Quick Answer

A standard front door replacement takes 3 to 5 hours on installation day, with 1 to 4 weeks of lead time before that while the door is ordered and delivered. Add 5 to 8 hours for sidelites or custom frames. The whole project from measurement visit to finished door usually runs 2 to 5 weeks in Enterprise, and the variable is lead time, not labor.

Table of Contents

The Full Timeline, Phase by Phase

Here’s where the time actually goes. Most homeowners focus on installation day because that’s when the mess happens, but the calendar is mostly spent waiting on the door itself.

  1. In-home measurement and consultation (1 visit, about 1 hour). A technician measures the opening, checks the frame for rot or square, confirms swing and handing, and helps you pick material, glass, and hardware. A good measurement visit also photographs the rough opening. That photo matters later.
  2. Order and lead time (1 to 4 weeks). This is the long stretch. A standard door in a common size and finish can ship faster; a custom door, unusual size, or specialty glass runs toward the longer end.
  3. Pre-installation confirmation (a phone call, days before). You get a confirmed date and, ideally, the name and photo of who’s coming. In Enterprise, scheduling around afternoon heat and monsoon-season storms is part of the planning.
  4. Installation day (3 to 5 hours standard, 5 to 8 with sidelites or custom). Tear-out, framing checks, setting the door, weathersealing, hardware, and cleanup.
  5. Final walkthrough (15 to 30 minutes). The crew demonstrates the latch, checks the swing, confirms the seal, and hands over your written guarantee.

Notice that only one of those five phases is the actual installation. When a contractor quotes you a vague “couple of weeks,” ask which phase they mean. The answer tells you a lot about how they run a job.

Why a Rough Opening Inspection Prevents Day-Two Delays

The rough opening is the framed hole in your wall where the door goes. It’s hidden behind trim and siding until the old door comes out, so the only way to know its condition is to look before ordering. That step is where prepared contractors separate from the rest.

In our experience across Enterprise, older homes near the river corridor and established neighborhoods often have original framing that’s been through decades of dry heat and monsoon humidity swings. An opening that looks fine from the inside can hide soft framing at the sill or a header out of square by half an inch. A door ordered to the wrong measurement can’t be installed straight. The crew improvises, the job spills into day two, and you’re the one living with a tarped doorway.

Here’s how to ask any contractor whether they do this inspection. The question is simple: “Will you inspect and measure the rough opening before you order the door, and will you show me what you found?” A prepared contractor answers yes without hesitation and can explain what they’d do if they found rot. An unprepared one says “we’ll deal with it on install day.” That’s the answer that costs you a second day.

In Stock vs. Custom Order: Real Lead Times

“In stock” means a door in a standard size and configuration is on a shelf somewhere in a distribution chain. “Custom order” means it’s built to your spec. The difference in wait time is real, and it’s the single biggest variable in your project calendar.

  • Standard in-stock doors: often ready in a matter of days to about a week, depending on finish and hardware availability.
  • Custom or non-standard sizes: typically 2 to 4 weeks.
  • Specialty glass, unusual finishes, or sidelite configurations: at the longer end, sometimes beyond 4 weeks.

Brands matter here because some product lines keep common configurations closer to ready. Therma-Tru doors are widely specified and common sizes tend to move faster through the supply chain. Masonite and ProVia both offer solid lines with varying lead times depending on the series and finish you choose. We work across PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, and we match the product to the job rather than steering everyone toward one brand. If your heart is set on a specific look, tell your contractor your deadline first. Lead time should be a conversation before the order, not an apology after it.

What Happens on Installation Day

Installation day has a rhythm, and knowing it helps you plan your own day. Here’s the honest clock for a standard door in Enterprise.

  1. Arrival and setup (30 minutes). The crew lays protection over the floor, stages tools, and confirms the plan with you.
  2. Old door removal (30 to 60 minutes). Out comes the old slab and frame, and this is the moment the rough opening is finally visible.
  3. Framing checks and prep (30 to 60 minutes). Square, level, and plumb get checked. Any rot or out-of-square issues found here get addressed before the new door goes in.
  4. Setting the new door (1 to 2 hours). The door is set, shimmed, and secured. It’s checked for swing and latch alignment.
  5. Weathersealing and trim (45 to 90 minutes). Seals, thresholds, and interior and exterior trim go on. This step matters more in Enterprise than in milder climates, because wind-driven monsoon rain finds every gap.
  6. Hardware and cleanup (30 minutes). Lockset, deadbolt, and any smart hardware get installed and tested. Debris goes with the crew.

Sidelites or a custom frame push you toward 5 to 8 hours. Either way, you’ll have a working door the same day in most cases. What you should not accept is a crew that vanishes mid-job or gives you a “sometime Tuesday” arrival window with no name attached.

Scenarios That Legitimately Extend a Job

Sometimes a job honestly takes longer. The difference between a fair delay and a bad one is whether the contractor told you before the work started. Here are the scenarios we see most in Enterprise.

  • Rotted framing or subfloor at the threshold. Decades of heat cycling and monsoon moisture can soften the sill. The fix is real carpentry, and it adds hours, not minutes.
  • Out-of-square openings. Older homes settle. A wall that’s out of square by a noticeable margin needs corrective framing before a new door will latch cleanly.
  • Stucco repair. Many Enterprise homes have stucco exteriors. Removing a door can crack the surrounding stucco, and patching and curing it takes its own time.
  • Surprise electrical or low-voltage runs. Doorbells, smart locks, and security wiring sometimes run through the frame area. Rerouting takes planning.

A good contractor identifies these risks at measurement and prices them into the quote as contingencies, with a written explanation of what would trigger the added cost. A bad one discovers them at 2 p.m. on install day and hands you a revised price on the spot. If someone quotes you a flat number with no mention of what might come up behind the trim, ask directly: “What would make this job take longer, and how would you handle the price if you found it?” Their answer tells you whether to trust the quote.

Questions That Reveal Whether a Contractor Is Prepared

You don’t need to be a door expert to vet a crew. You need five questions asked in the right order.

  1. “Will you inspect the rough opening before ordering?” The answer should be yes, with specifics.
  2. “What’s the lead time for the exact door I’m ordering, and is it in stock or custom?” Vague answers mean vague schedules.
  3. “Is the price in writing before work begins, and does it cover what happens if you find rot?” You want a written, line-item quote in hand before anyone touches the door.
  4. “Who is coming to my home, and will I know their name and see a photo before they arrive?” This one matters. Opening your door to a stranger is a real concern for a lot of homeowners, and you deserve certainty about who’s pulling into the driveway.
  5. “What’s your guarantee, in writing, and what happens if the work fails?” Get the terms in plain language: what’s covered, for how long, and who fixes it if something’s wrong.

Our answer to all five is built into how we run a job. Every quote comes in writing before work starts. Every technician is background-checked, identity-verified, and photo-badged, and you get their name and photo before the visit, whether you’re home alone, managing young kids, or an older homeowner who just wants to know the face at the door. If something goes wrong within the first year, our 365-Day Done Right Promise means we make it right, no arguing required. Every repair also carries its own written guarantee; if it fails, we come back and fix it at no charge.

How Our Pre-Installation Process Protects Your Schedule

Here’s what a Hale front door replacement actually looks like, from the inside, because the pre-installation phase is where schedules get protected or destroyed.

The measurement visit is done by a technician who knows what to look for. We photograph the opening, check for rot and square, and talk with you about swing, glass, and hardware, including options from CWS, ES Windows, and ECO Window Systems where they fit the job. We put the written price in your hands before anyone picks up a tool, so the number doesn’t move unless you ask for a change. Then we place the order, confirm the lead time in writing, and schedule a date. On the day, you know the name and face of who’s coming before they arrive. Installation runs 3 to 5 hours for a standard door, longer with sidelites, and the crew walks you through the finished door and hands you your written guarantee before leaving.

That’s a specialist’s process, and it’s why we handle front door replacement in Enterprise as a dedicated service rather than one item on a long general contractor list. We also handle window replacement in Enterprise and window repair in Enterprise with the same written-price and guaranteed-work approach. If you want the full picture of what we do, start at the Hale Windows & Doors Enterprise home page.

Frequently Asked Questions

Common Mistakes to Avoid

  • Ordering a door before inspecting the rough opening. This is the single biggest cause of a job spilling into day two. The trim comes off first, or the whole plan gets rebuilt on the fly.
  • Accepting a verbal price. A number over the phone isn’t a quote. Get it in writing, line item, before anyone orders anything.
  • Confusing lead time with install time. Your calendar is mostly waiting on the door, not watching the crew. Ask for both numbers separately so you can plan.
  • Ignoring monsoon-season scheduling. In Enterprise, a door left open or tarped during a summer storm creates water damage fast. Schedule around the weather, not against it.
  • Hiring a crew with no named arrival window. “We’ll be there sometime” means your whole day is spent waiting. A confirmed name, photo, and time protects your schedule.
  • Skipping the guarantee conversation. Ask what happens if the door sticks, leaks, or fails to latch within the first year. If the answer is vague, walk away.
  • Assuming a general contractor is a door specialist. Doors are their own trade. Specialists price them accurately and spot problems that generalize crews miss.

When to Call a Professional

Call a professional when the opening is out of square, when the frame is rotted or soft, or when the door you want requires customization. Also call when you’ve been quoted a multi-day job without a clear written reason, because that’s the moment to get a second opinion before you commit money. If you’re dealing with a sticking door that just needs adjustment, a pro can tell you whether it’s a quick fix or a replacement. We install and service windows and doors from eight professional lines, including PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, so we can match the product to the job rather than push one brand. Hale Windows & Doors Enterprise offers free estimates in Enterprise, with a written price before any work begins. Call (866) 616-0837 to schedule yours.

The Bottom Line

A front door replacement should take 3 to 5 hours of actual installation, with most of your calendar spent waiting on lead time. The jobs that drag are the ones where somebody ordered a door before inspecting the opening. Get a written quote, confirm the lead time for your exact door, ask who’s coming and when, and understand the guarantee before you say yes. Do those four things and your project stays on schedule. Call (866) 616-0837 for a free estimate, and we’ll put your price and your timeline in writing before we order anything.

Written by the team at Hale Windows & Doors Enterprise.

Why Impact

Six Reasons Homeowners Choose Hale Windows & Doors Enterprise

Storm Protection

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.

Energy Savings

Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.

Noise Reduction

Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.

Burglar Resistant

Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.

Year-Round Comfort

Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.

Property Value

A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.

Other Services

Other Hale Windows & Doors Enterprise Services

Reviews

What Neighbors Say About Hale Windows & Doors Enterprise

★★★★★

"Fogged double pane in the living room. They replaced the glass units only, not the whole frame, and saved me a lot."

RRaul C.
★★★★★

"Vetted installers make me feel better having them inside. They were respectful and cleaned up all the old caulk and debris."

HHank V.
★★★★★

"Replaced eight old aluminum windows. The crew showed ID, wore shoe covers, and finished the whole job in two days. House is quieter and warmer."

BBarbara N.
★★★★★

"Energy bills dropped noticeably after the replacement. Install was neat and trimmed properly."

GGabriela L.
Need Windows & Doors help in Enterprise? Licensed & insured · free written estimates
Call (866) 616-0837
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Hale Windows & Doors Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch