Last updated November 18, 2026
New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
How Long Does Window Replacement Take? Timelines and What to Expect
The installation crew might be in and out in four hours, but the custom-order window they’re installing took six weeks to arrive. That gap, between the sales appointment and the day the crew shows up, is where most homeowner frustration lives, and it’s the part nobody mentioned when you signed. Whole-project timelines for window replacement in Enterprise run from about three weeks on the fast end to twelve weeks or more when custom sizing, permits, and monsoon-season weather holds stack up. This guide breaks the job into the three phases contractors rarely explain upfront, gives you per-window time estimates by product type, and shows you how to spot a timeline promise that won’t survive contact with reality.
Quick Answer
A typical window replacement takes 3 to 12 weeks from order to finished job: two to six days of actual installation labor for an average home, preceded by three to eight weeks of manufacturing lead time for custom-sized units. On installation day itself, plan on 45 minutes for a single-hung insert window and up to four hours for a sliding patio door. If someone promises a full house in one day, ask how many people are on the crew before you believe it.
Table of Contents
- The three phases of a window replacement timeline
- Phase 1: From measurement to delivery
- Phase 2: What installation day actually looks like
- Phase 3: Cure, inspection, and the morning after
- How Enterprise weather reshapes the schedule
- Red flags in a timeline promise
- Cost ranges and what drives them
- Frequently asked questions
The three phases of a window replacement timeline
Most quotes talk about installation day because that’s the part the contractor controls. The full timeline has three phases, and only one of them happens on the day the crew arrives.
- Measurement to order. A technician measures every opening to the sixteenth of an inch, the order goes to the manufacturer, and the units are built and shipped. This phase is usually the longest and is driven by whether your window is a standard size or a custom build.
- Installation day (or days). The crew removes the old units, sets the new ones, seals, flashes, and cleans up. Time here depends on the window type and how many openings are in play.
- Cure and inspection. Sealants need time to cure before you paint or caulk over them, and a daylight inspection the morning after catches anything that looked fine under work lights.
In our experience across Enterprise, homeowners who understand all three phases tend to plan around them instead of being surprised by them. The house doesn’t sit half-finished because the crew disappeared. It sits because the units haven’t arrived yet, and knowing that ahead of time changes the whole experience. If you’re planning a full replacement, our guide to window replacement in Enterprise walks through the product decisions that come before any of this.
Phase 1: From measurement to delivery
This is where the real timeline lives, and it’s the phase most sales appointments skip. After measurement, your order enters manufacturing. Custom-sized units built to your exact opening take three to eight weeks, depending on the brand and the frame material. Stock sizes that match a standard opening can ship in under a week.
Enterprise’s housing stock explains a lot of this. The tract homes built through the 1980s and 1990s in neighborhoods like Silverado Ranch and the older pockets off Mountain Vista were framed to builder-standard dimensions, but “builder standard” wasn’t consistent from tract to tract, let alone from one production run to the next. A window opening measured at 35 3/4 inches in one house may be 36 1/4 in the next. That quarter inch is the difference between a stock unit and a custom order.
What to expect during Phase 1:
- Measurement visit: 30 to 90 minutes, depending on the number of openings.
- Order confirmation: you should receive a written document listing the exact model, size, glass package, and promised delivery window before manufacturing starts.
- Manufacturing lead time: 5 to 7 days for stock sizes; 3 to 8 weeks for custom builds. PGT and ViewLux both build custom orders, and lead times flex with the season.
- Delivery and staging: units arrive a day or two before installation and get staged in the garage or a protected area.
Ask for the delivery window in writing. A contractor who can’t tell you roughly when your units will arrive can’t give you an honest installation date either.
Phase 2: What installation day actually looks like
Installation day is faster than most homeowners expect, but “faster” doesn’t mean “careless.” A single-hung insert window, where the new unit fits into the existing frame, takes roughly 45 minutes to an hour. A full-frame replacement window, where the entire frame is removed and a new one is built in, takes about two hours per window. Casement windows in full-frame installation sit at the top of that range. A sliding patio door takes three to four hours because of the larger opening, the track, and the threshold work.
Here’s a rough schedule for a typical three-bedroom Enterprise home replacing 10 to 12 windows, using insert installation and interior trim that matches existing:
- Arrival and protection: 20 to 30 minutes. Floors and furniture covered, work areas established.
- Removal and prep: one to two hours, staggered as the crew works from opening to opening.
- Setting the new units: roughly 45 minutes each for single-hung insert, longer for full-frame or fixed units.
- Insulation, sealant, and flashing: 15 to 20 minutes per opening. Skipping this step or rushing it is what causes leaks down the road.
- Trim, cleanup, and haul-away: one to two hours at the end.
A two-person crew typically finishes 8 to 12 insert windows in a single day. Full-frame replacements for a whole house run two to three days. On any job, our written price is in your hands before the crew unloads, and our window repair service exists for the cases where replacement isn’t the right answer at all.
Phase 3: Cure, inspection, and the morning after
The crew’s job ends when the last window is set, but the installation isn’t finished curing. Silicone sealants used around exterior frames need 24 to 48 hours to cure before you paint or caulk over them. Painting too soon traps moisture or lifts the bead, and that shows up as a leak within the year. Low-E glass (a thin coating that blocks heat while letting sunlight through) has its own handling quirks: the coating is delicate, and a window that was cleaned too aggressively on day one can lose its full warranty coverage.
Schedule a daylight inspection the morning after installation. Natural light comes from a different angle than the work lights the crew used, and it reveals gaps, uneven trim, or sealant runs you’d otherwise miss. Note what you see and call it in the same day. Our guide to Hale Windows & Doors Enterprise service standards covers what “done right” actually means on a job like this.
What to check in that morning inspection:
- Every window opens and closes without binding, and every lock engages.
- A clean, continuous bead of sealant around the exterior perimeter, with no gaps at corners.
- Trim sits flush against the wall.
- No daylight visible around the frame from inside.
- Any screens and hardware accounted for and installed.
If the repair or installation isn’t right, the 365-Day Done Right Promise applies: we make it right, no argument needed. That’s a named guarantee on every job, in writing.
How Enterprise weather reshapes the schedule
Enterprise sits in a desert basin with two things that matter to a window schedule: summer monsoon storms that roll through July into September, and a late-fall and early-winter wind cycle that sends dust into any unprotected opening. Both create weather holds.
During monsoon season, a scheduled installation can get pushed by an afternoon cell that dumps rain on the foothills and drops a wall of dust on the valley floor within an hour. A contractor working in Enterprise should have a written weather policy that says what happens when that occurs. It should spell out:
- How a same-day reschedule is communicated (call, text, both, by what time of day).
- Whether a partial install gets sealed and protected before the crew leaves.
- Whether the rescheduled date is honored at the same price with no change-order fee.
When we schedule a July or August install, we leave a buffer around the day. If a monsoon hits, the crew seals what’s open, protects the interior, and returns. Nobody wants an open wall cavity through a dust storm, and nobody should have to argue about it afterward. A contractor with a fixed weather policy in writing is telling you they’ve done this before. One with no policy is telling you they haven’t.
Red flags in a timeline promise
Any contractor who quotes a “one-day full house replacement” for more than six windows without a large crew spelled out on the work order is selling you a number they can’t hit. It’s the single fastest way to spot a bad timeline.
Signs to watch for:
- No delivery window in writing. Custom units from PGT, CGI, or any other manufacturer have lead times. A quote without one is fiction.
- A start date before the units can arrive. If your contract says install in two weeks but the product builds in five, the date is a placeholder.
- No weather policy. In Enterprise, that’s a specific gap. A local installer should be able to tell you what happens when a July storm pushes a job.
- No crew count on the work order. You’re entitled to know how many people will be in your home. It also tells you whether a one-day claim is plausible.
- Vague language around cure time. If the contractor doesn’t mention sealant cure or glass-handling instructions, they’re likely to have skipped the details in the field too.
- Pressure to sign today for a “guaranteed” schedule. Real timelines don’t need a countdown to stay true.
The Threshold Standard applies here too. Every technician who comes to your door is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit. You know who’s coming, and you know the crew size. That transparency is part of the schedule promise.
Cost ranges and what drives them
Enterprises homeowners typically pay $450 to $900 per window installed for a vinyl insert single-hung, $750 to $1,400 for a full-frame unit in a premium line like ECO Window Systems or CWS, and $1,800 to $3,500 for a sliding patio door installed. Ranges flex with frame material, glass package, and opening size.
- Custom vs. stock sizing: stock is less expensive and ships faster; custom carries a premium and a longer lead time.
- Insert vs. full-frame: insert keeps your existing frame and runs cheaper; full-frame replaces the entire assembly and costs more but resets the envelope.
- Glass package: standard dual-pane vs. low-E (adds $30-$80 per window) vs. triple-pane (adds $150+ per window).
- Permits: required for full-frame replacements and door replacements. Insert replacements sometimes skip the permit; confirm who pulls it and whether the inspection is included.
- Access: second-story units and hard-to-reach openings add labor.
For a front door, our guide to front door replacement in Enterprise covers Therma-Tru and other entry-door options, their lead times (typically four to eight weeks for a custom door), and the installation day itself. Written pricing lands before work begins on every job, and the price you’re quoted shouldn’t change once the crew is on site unless you change the scope. If it does, ask why in writing.
Per-unit installation time at a glance
- Single-hung insert: 45 minutes to 1 hour
- Full-frame single-hung: about 2 hours
- Casement, full-frame: about 2 hours
- Fixed picture window: 1 to 1.5 hours
- Sliding patio door: 3 to 4 hours
- Front entry door, replacement: 3 to 5 hours
Common Mistakes to Avoid
- Booking on installation-day timing alone. The crew’s four hours in your home is only one phase of a job that spans months. Plan the full arc.
- Skipping the written delivery window. Without one in hand, you have no way to hold anyone to a date.
- Painting or caulking over fresh sealant. Silicone needs 24 to 48 hours. Painting sooner peels the bead and unseals the frame.
- Assuming a stock size will fit a 1980s tract home. Enterprise builder stock varies by tract. Measure to the sixteenth or ask for a measurement visit before you sign.
- Scheduling a monsoon-season install with no weather policy in writing. Enterprise storms arrive fast. A contractor without a policy leaves an opening exposed to dust and rain.
- Not inspecting in daylight the next morning. Work lights hide gaps. Daylight doesn’t. Do it the following morning and call anything off the same day.
- Signing a “one-day full house” quote without a crew count on the work order. If nobody can tell you how many people will be in your home, the timeline is guesswork.
When to Call a Professional
Call a professional when you’re replacing more than one or two windows, when the opening size doesn’t match a stock unit, when the existing frame shows rot or structural damage, or when you’re upgrading glass package and want the warranty honored. Do not attempt full-frame replacement as a DIY project. That work requires removing structural elements, re-flashing the exterior, and resealing the envelope, and mistakes show up as water damage inside the wall months later. Second-story and high-reach openings carry fall hazards that call for proper equipment and training. If your current windows are difficult to open or close, fogged between the panes, or leak air around the frame, a repair evaluation is worth a call before you commit to replacement: a single failed seal on an otherwise sound window doesn’t always need a new unit.
Our technicians have up to 17 years of experience across the eight professional lines we install (PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux), which means the product recommendation is matched to your opening, not pushed to the easiest sale. Hale Windows & Doors Enterprise offers free estimates in Enterprise – call (866) 616-0837 to schedule one.
Frequently Asked Questions
Plan for 3 to 12 weeks from order to finished job. Custom units take 3 to 8 weeks to manufacture, plus one to three days of installation, plus 24 to 48 hours of sealant cure before paint. Stock sizes compress the front end to about a week. Call (866) 616-0837 for a written timeline on your specific job – estimates are free.
Only if a large crew is listed on the work order and the windows are insert-style stock or pre-ordered units. A two-person crew typically handles 8 to 12 insert windows in a day. For more than six full-frame windows in Enterprise, expect two to three days. Ask who’s coming and how many before you sign.
Not always. July through September, an afternoon storm can force a same-day reschedule. A contractor should have a written weather policy saying how that reschedule gets communicated, how the opening gets sealed and protected before the crew leaves, and whether the new date carries any extra fee. Ours does.
Vinyl insert single-hung windows run $450 to $900 per window installed. Full-frame units in a premium line like CWS or ECO Window Systems run $750 to $1,400. Sliding patio doors run $1,800 to $3,500. The written price is in your hands before work begins, and no change-order surprises show up on the invoice. Call (866) 616-0837 for an exact quote.
For full-frame replacement and door replacement, yes. Permits and inspections are part of the job scope, not something you’re left to handle. Insert replacements sometimes skip the permit depending on the opening and local requirements, and that decision gets documented in the written proposal before work begins.
Our 365-Day Done Right Promise covers it: if the work isn’t right, we make it right, no argument needed. Every repair also carries a written guarantee, and if a repair fails, the second visit is free. You can reach a live person by phone 24 hours a day, 7 days a week – no voicemail, no callback queue.
The Bottom Line
Window replacement is a multi-phase project, and the honest timeline depends on all three: measurement-to-delivery lead time, installation days, and the cure-and-inspection window that follows. For most Enterprise homeowners, that’s three to twelve weeks door to door. The single-hung insert window installed in 45 minutes is real; a five-week wait before the crew gets here is just as real, and both belong in the conversation at the sales appointment. Ask for the delivery window in writing, ask how many people will be on the crew, ask for the weather policy, and schedule a daylight inspection the morning after. Contractors who answer all four with specifics are the ones whose timelines you can plan around.
Call (866) 616-0837 to schedule your free estimate, get a written price in hand before any work begins, and know exactly who’s showing up at your door and when.
Written by the team at Hale Windows & Doors Enterprise.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.