Last updated November 18, 2026
New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
How to Hire a Windows & Doors Contractor in Enterprise: A Step-by-Step Guide
Nevada’s State Contractors Board logged more than 1,200 complaints in 2023, and window and door work shows up disproportionately in that pile. The reason isn’t hard to find: a window install looks simple enough to fake. Somebody with a ladder, a caulk gun and a Craig’sList ad can make it through an afternoon without anyone noticing the damage until the first hard rain or the first month of 110-degree sun. Enterprise sits right in the middle of a valley that swings between building booms and slowdowns, and the swing pulls in unlicensed crews who finish the summer and vanish. This guide walks you through an actual vetting sequence: the exact State Contractors Board lookup, the license class that applies to full-frame replacement, the five items every legitimate bid must contain, and the questions that expose an unqualified bidder in under ten minutes.
Quick Answer
Hire a windows and doors contractor in Enterprise by verifying their Nevada State Contractors Board license number yourself, confirming the license class matches the work (B-2 Glazing for full-frame window replacement, a general B license for structural openings), running a lien history check through Clark County, and refusing any bid that lacks a written price, itemized product specs, permit responsibility, warranty terms and a start date. Get three written bids, verify all three the same way, and never sign a contract with an “allowance” or “per manufacturer spec” clause that leaves the product unspecified.
Table of Contents
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Why Hiring in Enterprise Is Riskier Than Most Nevada Cities
Enterprise has grown fast, and growth attracts a specific kind of contractor: the one who shows up with a magnetic sign on a pickup, no license on file, and a price that undercuts every legitimate bid by 30 percent. In an established market like Reno or Carson City, the bad actors get weeded out because everybody’s neighbors have used the same three companies for fifteen years. Enterprise doesn’t work that way. Neighborhoods like Southern Highlands, Coronado Ranch and Mountain’s Edge are full of newer homes where nobody down the street has replaced a window yet, which means there’s no word-of-mouth filter catching the fly-by-night crews.
The climate compounds the risk. Enterprise sits in a high-desert valley that swings from summer highs over 110 degrees to winter nights below freezing. That temperature spread is brutal on window seals, on low-E glass coatings (the thin metallic layer that reflects heat while letting light through) and on the caulk lines around every frame. A window installed with the wrong glazing orientation or a single bead of cheap sealant will look fine through the fall and start fogging, leaking or rattling by the following summer. By the time the homeowner notices, the crew that installed it is on a job in another state.
Nevada law gives you real tools here. The State Contractors Board can fine, suspend or revoke a license, and homeowners have up to four years to file a residential construction defect claim. But all of that protection evaporates the moment you hire somebody without a license number, because there’s no license to revoke and no recovery fund to draw against. The vetting process below is built around that single reality.
Step 1: Verify the License on the NSCB Website
Every legitimate contractor in Nevada carries a state license number, and verifying it takes about ninety seconds on the Nevada State Contractors Board website. Do this before you take a bid seriously, not after. A salesperson who won’t hand over the number without a signed contract already has your answer.
- Ask for the license number in writing. It should appear on the bid, the business card and the contractor’s vehicle. A verbal number is not a number.
- Go to the NSCB license search directly. Type the URL yourself rather than clicking a link the contractor sends you. Fake lookup pages exist.
- Check the license status. It must read “Active.” “Expired,” “Suspended,” “Revoked” and “Delinquent” all mean the contractor cannot legally work for you.
- Check the license classification. Confirm the class matches your job, which we cover in the next section.
- Check the monetary limit. Nevada licenses carry a cap on the size of job the contractor can legally take. If your full-house window replacement is quoted at $18,000 and the contractor’s limit is $10,000, the contract is unenforceable.
- Check the bond and insurance entries. A current license means a current surety bond is on file. That bond is your leverage if the contractor walks off the job.
- Read the complaint history. One complaint a decade ago is not a deal-breaker. A pattern of unresolved complaints in the last 24 months is.
One nuance people miss: the NSCB record shows the qualifying individual, the person who actually holds the license and passed the exam. Ask who that person is and whether they’ll be on your job. If the answer is a shrug, the crew showing up may be subcontracted labor with no accountability to the license.
Which License Class You Actually Need
Nevada uses a lettered classification system, and window and door work can fall under more than one class depending on the scope. Getting this wrong is how homeowners end up with a “B” general contractor who claims window expertise they don’t have, or a handyman with no license at all.
- B-2 Glazing: This is the class that covers most window and door installation work: inserting new units into existing openings, glass replacement, storefront work and glazing. If you’re swapping windows into existing frames, a B-2 is the specialist license.
- General B: This class covers general building construction and can legally handle full-frame replacement when a job involves altering structural framing or resizing rough openings. A general contractor can do window work, but window work is not their specialty.
- No license at all: The most common story for the trouble cases. A handyman who does “everything” is not licensed for contracting work in Nevada, and any job over $1,000 that requires a license done by an unlicensed person is a problem you inherit.
For front door replacement, the same classes apply. A door replacement that requires cutting a new opening or reframing a wall calls for at least a general B, while a straight swap into an existing frame commonly falls under B-2 work. When we quote a front door replacement in Enterprise, we tell the homeowner which class applies before the estimate arrives so they know what to look for on the license lookup.
Step 2: The Five Items Every Legitimate Bid Must Contain
A written bid is not automatically a good bid. The paper a contractor hands you should contain five specific things, and the absence of any one of them tells you something worth knowing before you sign.
- A written price, not a range. A single firm number with the scope clearly defined. “Between $12,000 and $16,000 depending on what we find” is not a bid. It’s a placeholder that lets the contractor set the final price after your old windows are in the truck.
- Itemized product specs. Brand, model line, glass package, U-factor, Solar Heat Gain Coefficient and frame material. If your bid says “low-E, argon-filled” without a brand and a model number, you cannot compare it to the next bid and you cannot verify what got installed.
- Permit responsibility spelled out. Clark County requires permits for structural changes and many replacement jobs. The bid must state whether the contractor pulls the permit and pays for it, or whether you’re responsible. If the bid is silent, assume the contractor is skipping it.
- Warranty terms in writing. Two separate warranties matter: the manufacturer’s warranty on the product and the installer’s warranty on the labor. Ask for the length of each and what voids them. A lifetime product warranty with a one-year labor warranty tells you what the contractor actually stands behind.
- A start date and a completion window. Not “late summer,” an actual week. Window and door lead times in Enterprise run four to twelve weeks depending on the product line, and a contractor who won’t commit to dates in writing is signaling they don’t control their supply chain.
We put a written price in the homeowner’s hands before any work begins, every time, on every job. That policy exists because the alternative, the “we’ll see when we get in there” estimate, is where most of the disputes we hear about in Enterprise start.
Step 3: Run a Lien History Check in Clark County
This step is the one most homeowners skip, and it’s the one that can cost them their title. In Nevada, a supplier or subcontractor who isn’t paid has the right to record a mechanic’s lien against your property, even if you paid the general contractor in full. The lien attaches to your house, not to the contractor’s wallet. A lien history check tells you whether a contractor has a pattern of leaving unpaid suppliers behind.
- Search the Clark County Recorder’s index. County records are public. Search the contractor’s legal business name and any trade names they’ve used. You’re looking for recorded mechanic’s lien notices against past clients.
- Check the Nevada Secretary of State business entity search. Confirm the business entity is active and in good standing. A dissolved LLC is a red flag.
- Ask the contractor directly if any suppliers have filed liens in the last three years. A straight “yes, one, and here’s how it was resolved” is a good sign. “Never” from a contractor who has run thousands of jobs in a fast-growth valley deserves a second look.
- Get lien releases with every payment. On larger jobs, make your final payment conditional on receiving a signed lien release from the contractor and any subcontractors or suppliers who touched the job.
Window replacement involves a real supplier chain: the manufacturer, the local distributor, the installation crew. When a contractor disappears mid-job, the manufacturer doesn’t eat the loss. The lien filing lands on the homeowner. Thirty minutes with the county recorder’s index is cheap insurance against a title cloud that can take a real estate attorney to clear.
Red-Flag Contract Language That Should Stop the Signing
The words in a window contract matter more than the sales pitch that got you to the table. These are the phrases that show up again and again in the disputes we hear about, and each one points to a specific hole in the deal.
- “Allowance.” An allowance is a set dollar amount in the contract that covers a product or line item the contractor hasn’t specified. “Glass allowance: $800” means the actual cost might be $1,400, and you pay the difference. On a window contract, there should be no allowance for windows, glass or hardware. The product is the job.
- “As needed.” “Reframing as needed,” “trim repair as needed,” “sealant as needed.” This language lets the contractor expand the scope and the price after work starts. Good contracts specify what’s included and what triggers a change order.
- “Per manufacturer spec” without the spec. If the contract references a specification, the spec sheet should be attached. Otherwise the language means nothing and gives you nothing to enforce.
- A large deposit before any product is ordered. A reasonable deposit covers materials and permits. A 50 percent deposit up front with no order confirmation in writing is a cash-flow move, not a standard practice.
- Verbal promises not in the document. “We’ll throw in the trim work” and “we’ll come back and fix the stucco” mean nothing if the contract doesn’t say it. Every promise made on the walkthrough should appear in the signed document.
- No named point of contact. A legitimate contractor tells you who’s coming to your home, by name and photo, before the visit. If you can’t get the name of the crew lead before the job, you have no accountability trail.
Questions That Separate a Window Specialist From a Handyman
Most of the bad window jobs in Enterprise start with somebody who isn’t dishonest, just unqualified. A general handyman who “does windows” can turn up, install a unit and disappear before the leaks start. These questions take about ten minutes to run through and they sort the specialists from the generalists fast.
- “Which glass package would you put on the west-facing windows in this house, and why?” A specialist knows that western exposure in an Enterprise summer means high solar heat gain, and will talk you through the tradeoff between a lower SHGC coating and visible light in specific rooms. A handyman will say “low-E” and move on.
- “Which brands do you buy from and what’s the difference between them?” A specialist works with specific manufacturers and knows the difference between a PGT frame and an ES Windows frame, or why a Therma-Tru door fits one opening better than another. A generalist buys whatever the local supply house has on the shelf.
- “Have you done full-frame replacement in a 1990s build in Southern Highlands, and what did the stucco repair involve?” Enterprise-specific questions expose whether the contractor has actually worked in your neighborhood. Stucco repairs on full-frame replacement are a common add and a common place for costs to swell.
- “Can I see three addresses you’ve completed in Enterprise in the last twelve months?” A real specialist can produce them. A generalist will fumble.
- “What happens if a window you install starts fogging in year two?” Fogged glass means a failed seal, and a failed seal means the warranty question matters. A specialist has a written answer. If the answer is “we’ll figure it out,” figure it out with someone else.
- “Who pulls the permit and can I see a copy before the work starts?” A specialist pulls permits routinely and knows exactly what Clark County requires. A handyman dodges the question.
- “Are you insured, and can I see a certificate of insurance?” Get the certificate, call the insurer and confirm it’s current. If a worker gets hurt on your property and the contractor isn’t insured, you may be on the hook.
If you want a version of this same vetting lens applied to repair work rather than full replacement, our guide to window repair in Enterprise walks through what to check when the job is a fix rather than a swap.
Common Mistakes to Avoid
- Hiring the first bidder who showed up in the driveway. Door-to-door window sales spike in Enterprise during the boom season. A knock on the door is not a referral, and the price quoted at the kitchen table often grows once the contract is drafted.
- Skipping the license lookup because the price was good. The unlicensed crew can bid 30 percent lower because they’re not carrying a bond, insurance or a permit fee. All three of those are the homeowner’s problem the moment something goes wrong.
- Accepting “we’ll pull the permit later.” In Clark County, permit applications are the contractor’s job and unpermitted window work can complicate a future sale, an insurance claim or a refinance. Pull the permit first or don’t hire them.
- Not reading the warranty language. The manufacturer’s warranty on the glass and the installer’s warranty on the labor are different documents with different terms. Ask for both in writing and read them before you sign.
- Letting the deposit run ahead of the product order. If you write a large check up front, get a written confirmation of the order placed with the manufacturer before money changes hands.
- Replacing windows one at a time with no plan. Enterprise homes built in the 1990s and early 2000s often have all the original units failing at once. Piecemeal replacement with different brands can look mismatched from the street and cost more in labor than a single coordinated window replacement in Enterprise.
- Comparing bids with different scopes. One bid includes stucco repair and trim; another doesn’t. The lower number is not lower, it’s just smaller. Line up the scopes side by side before you compare prices.
When to Call a Professional
Some window and door problems are DIY-friendly: a loose weatherstrip, a worn screen, a sticking latch. Others aren’t, and calling in a specialist early usually costs less than waiting. Call a professional if your windows fog between the panes (a failed seal that requires unit replacement, not repair), if you feel a draft or see water staining around the frame after rain, if the frame itself is soft or warped, if your front door has started to bind or let daylight through the edges, or if a window has taken impact damage. Glass replacement, frame work and structural reframing all involve safety considerations that a trained installer is equipped to handle.
We handle all of that in Enterprise. Hale Windows & Doors Enterprise offers free estimates in Enterprise – call (866) 616-0837 to schedule one. You’ll know who’s coming, by name and photo, before the visit, and you’ll have a written price in hand before any work starts.
If you’re still weighing repair versus replacement, our overview of windows and doors in Enterprise covers the decision framework we walk homeowners through.
Frequently Asked Questions
Yes. Nevada requires a state contractor’s license for any window or door installation work over $1,000, and you should verify the license number on the Nevada State Contractors Board website before signing anything. The license must be active, in the correct class for your job (B-2 Glazing for most replacement work, general B for structural openings) and carry a monetary limit at or above your contract price. Call (866) 616-0837 for a free estimate from a licensed Enterprise specialist.
Most single-window replacement jobs in Enterprise run $450 to $900 per window installed, with full-house jobs typically landing between $7,000 and $18,000 depending on the number of windows, the product line and whether the job is insert or full-frame. Western-facing units with upgraded low-E coatings and impact-rated glass push toward the upper end. Get three written bids and compare scopes line by line. Call (866) 616-0837 for a free written estimate.
It shouldn’t. A properly written bid specifies the scope, the product and the price, and any change comes through a signed change order you approve before the work happens. Bids with “allowances” or “as needed” language are the ones that grow. We put a written price in your hands before any work begins, and that number doesn’t move unless you approve a change.
Insert replacement slides a new window unit into your existing frame without disturbing the surrounding wall or stucco. Full-frame replacement removes the entire window including the frame, which is necessary when the framing itself is damaged, warped or failing, and it requires stucco repair around the new opening. Full-frame typically costs 25 to 40 percent more than insert and takes longer, but it’s the right call when the original frame is shot.
Product lead time in Enterprise runs four to twelve weeks depending on the brand and configuration, and most full-house jobs take one to three days on site once the units arrive. Custom sizes and impact-rated glass run toward the longer end of the lead time window. Any contractor who quotes shorter lead times than that is guessing. Call (866) 616-0837 to talk through realistic timing for your job.
You should expect two written warranties: the manufacturer’s warranty on the product (typically 10 years to lifetime on the glass and frame, depending on brand) and the installer’s warranty on the labor. You should also get the guarantee terms in writing before you sign, stating what’s covered, for how long, and what happens if the work fails. We back every job with our 365-Day Done Right Promise: if the work is not right, we make it right. Every repair carries a written guarantee, and if the repair fails, the second visit is free.
The Bottom Line
The fast-moving Enterprise market rewards a patient vetting sequence. Verify the license class on the NSCB site, run the lien history check through Clark County, and demand the five written items on every bid. Refuse contracts with allowances or unspecified specs. Ask the specialist questions that expose what a contractor actually knows about window product lines, stucco repair and Clark County permitting. Get three bids with matching scopes and compare them line by line. That process takes a few hours of research and protects you from the failure mode this valley actively produces: a crew that installs the windows, takes the check and disappears before the first summer rain.
If you’d rather work with a company that tells you all of this up front, call Hale Windows & Doors Enterprise at (866) 616-0837 for a free estimate. We work with eight professional product lines including ES Windows and Therma-Tru, put a written price in your hands before any work begins, tell you exactly who’s coming to your home before they arrive, and back every job with the 365-Day Done Right Promise.
Written by the team at Hale Windows & Doors Enterprise.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.