New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
What Window Installation Actually Costs Per Window in Enterprise, NV
Per-window installation in Enterprise runs $420-$950, and that range is not padding: it tracks where the window sits on your house. Ground-floor units with standard rough openings land at the bottom. Second-story units needing ladder access, west- and south-facing glass that needs solar-control low-E, and windows that fall on a builder’s non-standard rough opening push toward the top. Hale Windows & Doors Enterprise quotes each window by position, in writing, before a tool comes off the truck. Call (866) 616-0837 for a free estimate.

That’s the short answer. The rest of this page explains why a single “average” per-window number is the wrong thing to budget from in Enterprise, and what actually moves your total.
Key takeaways
- Position on the house drives cost more than window size in Enterprise.
- Builder-specific rough openings in 1990s-2000s tract homes often add $80-$200 per unit unless matched to the right product line up front.
- West and south glass takes the worst Mojave sun and usually warrants solar-control low-E.
- Hale’s written price includes labor, unit, haul-away, and stucco touch-up. No fine print.
Why “Cost Per Window” Varies So Much Across One Enterprise House
Enterprise is a master-planned, largely built-out Las Vegas Valley suburb, and almost every window here went in within the same two-decade stretch. That means whole tracts hit their failure point on a similar schedule. But even within one tract, two windows of identical size can cost $300 apart to install. The variables that cause that gap have almost nothing to do with the glass itself:
- Elevation. A ground-floor window can be set, shimmed, and sealed from a step ladder. A second-floor window needs taller access, more labor hours, and often extra hands for the unit. That premium is real and it should be on your quote before anyone shows up.
- Solar exposure. West- and south-facing windows take the worst load in Enterprise. Summer highs here run above 105°F, and the sun hits those elevations hard through the afternoon. That’s why solar-control low-E (a thin coating that blocks heat while letting light through) is a genuine energy decision on those walls, not a sales add-on.
- Rough opening. Many Enterprise builders used proprietary openings that don’t match today’s standard catalog sizes. If a window has to be ordered to standard spec and shimmed into a non-standard opening, that adds stucco patching and labor. Called out upfront, it’s a known number. Hidden, it’s a surprise line on the invoice.
Position-by-Position Cost Breakdown
Here’s what each situation typically runs. These are installed prices – unit, labor, haul-away, and stucco touch-up included.
| Window position or condition | Installed cost per window |
| Ground floor, standard rough opening | $420-$650 |
| Second story, ladder access required | $550-$780 |
| Non-standard builder dimensions, custom order | $680-$950 |
| West/south-facing with solar-control low-E upgrade | $520-$900 |
| Non-standard opening requiring shim + stucco patch | +$80-$200 |
Read the table again with your own house in mind. Most Enterprise homes have a mix. The ground-floor kitchen window might sit at $480. The upstairs west-facing bedroom, needing ladder access and upgraded glazing, could land at $760. Averaging those to a single headline number tells you nothing useful about your actual job.
Hale installs and services windows and doors from eight professional lines – PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That depth matters here. When a rough opening doesn’t match standard catalog spec, there’s a real chance one of those lines already has a unit that fits without going full custom order. That’s a cost advantage single-brand installers can’t offer, because they go custom whenever the opening is off-spec.
What the Written Price Should Include (and Why Builders and Big Boxes Don’t Always Show It)
Per-window pricing gets muddy fast when a base rate hides extras. Hale’s no-hassle written price puts the full number in your hands before work starts, on every job. It breaks out:
- The window unit itself, matched to your opening and elevation
- Labor, including second-story or ladder access
- Haul-away of the old unit
- Stucco touch-up around the frame
- Permit allocation (more on this below)
You’ll also see any shim or patch charge for a non-standard opening stated as its own line, not buried. If something can’t be known until the old window comes out, you’ll hear about it before work continues. That’s the difference between a quoted price and an invoice nobody expected.
Enterprise Permit and HOA Realities That Affect Your Total
Window replacement in Enterprise falls under Clark County building jurisdiction. Replacing more than a certain number of windows on a single permit pull affects the per-unit permit fee. If you’re replacing one or two windows, that fee spread across the job looks different than if you’re doing a whole-house replacement where the cost divides across many units. Hale’s written quote breaks out permit allocation explicitly so you can see what you’re paying and why.
There’s a second layer here most cost guides skip: HOA architectural approval. Enterprise’s HOA-governed tract homogeneity means any visible exterior change – frame color, a new door style, added patio sliders – usually needs HOA sign-off before a permit is pulled or a single window goes in. In the larger west-side and southern Enterprise tracts, whole blocks of the same builder’s vinyl sliders and dual-pane units tend to fog and fail within a few years of each other, so neighbors often replace together. If your street is due, understanding the approval process up front saves time.
Why We Ask Who’s Coming Before We Quote
Window replacement means strangers working inside your home for a day or more. For parents with young children, older homeowners, or anyone home alone, that’s a legitimate concern. Hale’s Threshold Standard addresses it with five concrete steps: every technician is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit. You know exactly who is at the door before you open it. Our technicians have up to 17 years of experience, and every job carries the 365-Day Done Right Promise. If it isn’t right, Hale makes it right – and every repair also carries a written guarantee, with a free second visit if the repair fails. Live phone support answers every call, day or night.
When you’re ready to move from cost ranges to a real number, see our full Window Installation in Enterprise details, or start at our home page to see how we work.
FAQs
Per-window installation in Enterprise typically runs $420-$950 depending on window position. Ground-floor standard openings sit at $420-$650, second-story units with ladder access at $550-$780, and non-standard builder dimensions at $680-$950. West- and south-facing windows with solar-control low-E land at $520-$900. Call (866) 616-0837 for a written quote on your specific windows – estimates are free.
Repair is almost always cheaper for a single failed component – a cracked sash, a broken lock, or a failed hinge – while replacement makes more sense when the sealed unit has fogged and the glass can’t be salvaged. In Enterprise’s 1990s-2000s tract homes, fogged dual-pane units and hardened weatherstripping are the most common calls, and whole blocks of the same builder’s windows often fail within a few years of each other. Call (866) 616-0837 and we’ll tell you honestly which way to go – the written price on a repair comes with a guarantee.
Yes – second-story windows are routine for us and typically run $550-$780 installed, which includes the extra labor and access a second-floor unit requires. Call (866) 616-0837 and we’ll price each window by position, so the upstairs units on your quote match what the job actually involves.
Many Enterprise builders in the 1990s and 2000s used proprietary rough opening dimensions that don’t match today’s standard catalog sizes, so an off-spec opening can add $80-$200 per unit in shimming and stucco patching. Hale’s eight product lines – including ES Windows and ECO Window Systems – often have a unit that fits a non-standard opening without going to full custom fabrication. Call (866) 616-0837 and we’ll check your opening dimensions against what’s available.
Get Your Written Per-Window Price Before Anyone Picks Up a Tool
Stop guessing from an average that doesn’t match your house. Hale Windows & Doors Enterprise prices each window by position, elevation, and opening – and puts it in writing before work begins, backed by the 365-Day Done Right Promise. Call (866) 616-0837 for a free estimate and a real per-window number.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise, NV.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Hale Windows & Doors Enterprise Services
What Neighbors Say About Hale Windows & Doors Enterprise
What Our Customers Say
"Fogged double pane in the living room. They replaced the glass units only, not the whole frame, and saved me a lot."
- Raul C."Vetted installers make me feel better having them inside. They were respectful and cleaned up all the old caulk and debris."
- Hank V."Replaced eight old aluminum windows. The crew showed ID, wore shoe covers, and finished the whole job in two days. House is quieter and warmer."
- Barbara N.