New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Therma-Tru Impact Garage Doors: The Enterprise Owner’s Guide
We install Therma-Tru-compatible impact garage doors and replacement parts for Enterprise homeowners, with typical installed prices running from about $1,900 to $4,800 depending on size, glass options, and impact rating. If your door is stuck, sagging, or letting in water, we can usually get a technician out to measure and quote within a few days. Most Enterprise owners find us after a door that used to glide starts grinding, bounces back up before it closes, or won’t seal against a summer monsoon blowing sideways through the Sahara Avenue corridor. We always quote in writing before work begins and stamp a 365-Day Done Right Promise on the job.

Which Therma-Tru Models This Applies To
Therma-Tru’s impact garage door line covers a handful of series – the Fiber-Classic and Smooth-Star lines for panel doors, plus their premium collections – and each series uses different panel profiles, glazing frames, and hinge patterns. Before you buy anything, find the manufacturer’s label on the inside face of the door or the side of the frame; it lists the series and the size. Impact doors are also rated by design pressure (DP), and a door rated DP-30 is not interchangeable with a DP-40 unit – the panels and hardware differ.
For Enterprise, the OEM-versus-aftermarket call matters more than most people realize. A factory Therma-Tru section runs 20 to 40 percent more than a quality aftermarket equivalent, but it guarantees a match for paint color, panel texture, and glazing. Aftermarket is fine for rollers, hinges, and weather seals. Original Therma-Tru sections are the right move when you’re replacing one damaged panel on a matched set. We’re independent from Therma-Tru, so we can show you both prices and explain the trade-off without a sales pitch.
Signs Your Therma-Tru Impact Garage Doors Is Failing
- The door bounces back up before it closes. A misaligned safety sensor or a failing close-travel limit is usually the cause. Impact doors are heavier than standard units, so limit switches work harder.
- Grinding or squealing when it moves. Worn steel rollers or dry hinges are the usual culprits. In Enterprise’s dry heat, lubricant evaporates faster than in most markets, so a door that ran silent for three years can start screaming in its fourth.
- Water pooling inside the threshold. A compressed or cracked bottom seal lets monsoon rain past. Impact doors rely on tight seals, so a failed seal undercuts the whole rating.
- A visible gap in the panel seam. On impact-rated doors, a split seam is a structural failure, not just cosmetic – the door no longer meets the wind-load rating it was sold with.
- The door drops suddenly or feels loose. That points to torsion-spring fatigue or stretched cables. Both are genuinely dangerous and should not be touched by a homeowner.
Replacement Cost & What’s Included
For a full Therma-Tru-compatible impact door installed in Enterprise, expect $1,900 to $3,200 for a single-car door and $3,400 to $4,800 for a double, depending on glass and panel style. Hardware-only repairs – rollers, hinges, seals, and tracks – run $180 to $450. A single replacement panel with matched paint and texture lands between $600 and $1,100. The range is driven by size, impact rating, glazing type, and whether the existing frame and tracks are reused.
Every quote is line-itemed: part, labor, disposal, and any track or frame work, written and delivered before we touch the door. Every repair carries a written guarantee, and if a repair fails, a second visit is free. We don’t charge change-order surprises.
DIY or Call Us?
You can safely replace a bottom weather seal, swap a photo-eye sensor, or lubricate hinges and rollers – those are homeowner-level jobs. Torsion springs, cables, and anything under tension are not. A torsion spring on an impact door can hold hundreds of pounds of stored force, and a wrong move can cause serious injury or break the panel. Impact-rated doors also lose their rating if a seal or panel is installed incorrectly, which matters in Enterprise where summer wind gusts are real. If the door is grinding, sagging, or bouncing back up, call us at (866) 616-0837 for a free estimate – we’ll tell you plainly what’s safe to do yourself and what isn’t.
FAQs
Ten to fifteen years is typical for the door itself in Enterprise, though hardware usually needs attention sooner – rollers and seals often go in five to seven years because the dry desert air and strong UV break down lubricants and rubber faster than in cooler climates. Torsion springs average seven to nine years here.
Often yes. If the panels and frame are intact, we can replace rollers, hinges, seals, cables, springs, or a single damaged section for $180 to $1,100 rather than $1,900 to $4,800 for a full door. We inspect first and quote the repair before recommending replacement – call (866) 616-0837 for a free look.
Most hardware repairs are done in one to two hours. A full door replacement is a half-day job for a single door and most of a day for a double, assuming no frame or track repair is needed. We schedule the work after you’ve seen the written price and approved it.
We order directly from the manufacturer or an authorized distributor using the series and DP rating off your door’s label, so the part matches your specific model rather than a close guess. We don’t carry stock of parts locally; each order is matched to your door and confirmed before we schedule the install. We also service doors by PGT, CGI, and CWS if you’re cross-shopping.
Call for a Free Estimate
If your Therma-Tru impact garage door is failing, the fastest path to a real answer is a short call. Every technician is background-checked, identity-verified, and photo-badged – you’ll get their name and photo before the visit, so you know who’s at your door. Call Hale Windows & Doors Enterprise at (866) 616-0837 for a free estimate, a written price, and a 365-Day Done Right Promise on the work.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.