New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Therma-Tru Front Door Replacement in Enterprise: What to Know First
We provide independent Therma-Tru front door replacement in Enterprise, and most single-door swaps wrap up in one day once the door and hardware are on hand. A written price is in your hands before anyone touches the frame, and every job carries our 365-Day Done Right Promise. Expect a realistic range of $1,850 to $4,600 installed depending on door line, glass package, and whether the rough opening needs work. This page is for Enterprise homeowners who already own a Therma-Tru door – a Fiber-Classic, Smooth-Star, or a Classic-Craft – and need it replaced, not sold a pitch on a different brand. Call (866) 616-0837 and a live person answers, day or night.

How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru makes a genuinely good door. When one fails in Enterprise, it’s usually one of five patterns, and each points to a specific fix. Our technicians have up to 17 years of experience, and they’ve seen every one of these.
- Fiberglass skin cracks along the lock rail (Fiber-Classic, Smooth-Star). The cause is almost never impact – it’s the deadbolt bore enlarging over years of torque, plus sun-driven expansion on a west-facing slab. Once the skin fractures at the bore, water follows the crack. We replace the slab and set the new lock prep to OEM spec rather than patching a crack that will reopen.
- Warped or delaminated slab on wood-edge and composite-edge doors. Enterprise’s dry heat bakes the exterior face while the interior stays air-conditioned, and the differential shows up as a bowed slab that drags the threshold or won’t latch. On Classic-Craft and similar lines, a bowed slab usually means the door is past straightening. We replace it and check the frame for square before the new leaf goes in.
- Failed glass seals and fogging on decorative lites. Therma-Tru’s sealed insulated glass units (IGUs) can lose their seal and fog between the panes, most often on the sun-hammered south and west elevations. We source the OEM glass unit when it’s available and a matching aftermarket unit when it isn’t, and we tell you which one you’re getting before we order.
- Sagging hinges and a door that won’t stay closed (steel and fiberglass entry lines). On a heavy Therma-Tru entry door, one hinge pulling loose from the jamb is a sign the jamb itself has softened or the screws have lost their bite in the frame. We re-anchor into solid jamb material or replace the jamb leg, then rehang – not just swap screws and hope.
- Rot at the bottom rail and jamb feet. Even good doors take on water where the sill meets the threshold if the exterior caulk line has failed. On Therma-Tru wood-edge products, that rot spreads up the jamb faster than owners expect. We replace the affected jamb section and re-seal the sill, and we check the flashing while the door is out.
One thing you won’t find on Therma-Tru’s own site: in Enterprise, the failure we see most on Fiber-Classic doors is a hairline crack at the deadbolt bore that starts before the door ever looks old. It’s a climate-and-hardware issue, not a defect, and it’s why we re-check every bore on every Therma-Tru door we touch.
Our Therma-Tru Front Door Replacement Process
Every Therma-Tru job follows the same steps, and you know the price before any of them start.
- 1
Diagnostics. We measure the rough opening, check the frame for square and rot, inspect the sill and flashing, and confirm whether the issue is the slab, the jamb, the hardware, or all three.
- 2
Parts decision. We walk you through OEM versus quality aftermarket – Therma-Tru OEM glass units, sills, and hardware keep the door’s original warranty intact where it still applies; a matching aftermarket part can save money when it doesn’t. You choose, and it’s in writing.
- 3
Written price. You get a line-item price before work begins. No change orders mid-job.
- 4
The replacement. We remove the old door and, where needed, the frame; set the new door plumb and square; install hardware to OEM spec; and seal the sill and exterior caulk line.
- 5
The test. We open and close the door, check the latch and deadbolt alignment, confirm the weatherstripping seals, and hose-check the sill.
- 6
The guarantee and cleanup. We hand you a written guarantee, haul away the old door, and leave the entry swept clean.
We’re an independent Therma-Tru service provider – not authorized or affiliated with Therma-Tru – so we work to the manufacturer’s spec without being bound to a single vendor’s parts list.
What Therma-Tru Front Door Replacement Costs in Enterprise
Prices below are installed ranges for Enterprise and nearby areas. Your written estimate is the real number.

- Slab replacement only (reusing the existing frame): $1,850-$2,900
- Full door and frame replacement, standard Therma-Tru entry line: $2,600-$4,000
- Upgrade glass package (decorative or low-E): add $350-$900
- Jamb, sill, or threshold repair found during the job: add $300-$800
- Rot repair at the bottom rail or jamb feet: add $400-$1,100
What moves the price: the door line, the glass, whether the rough opening is sound, and whether the frame can be reused. Free estimates, every time. Call (866) 616-0837 for an exact quote.
Why Enterprise Homeowners Call Hale Windows & Doors Enterprise for Therma-Tru Work
You know who’s coming before the truck pulls up. Every technician is background-checked, identity-verified, photo-badged, and sent to you by name and photo before the visit – the Threshold Standard, and it’s the reason homeowners who live alone or have young kids at home choose us. Live phone support answers every call, 24 hours a day, 7 days a week. The 365-Day Done Right Promise backs every job: if it’s not right, we make it right. We install and service eight product lines – PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux – so we match the right door to the job instead of pushing one brand. Call (866) 616-0837 for a free estimate.
FAQs
It depends on whether the door was still under an active Therma-Tru warranty and whether OEM parts are used. Using OEM glass and hardware preserves the original coverage where it applies; quality aftermarket parts may not. We tell you which path keeps coverage before you decide, and our own workmanship is covered separately by our written guarantee. Call (866) 616-0837 with your door’s model and we’ll sort out the warranty question for you.
Usually yes – OEM glass units and hardware are sourced to match your door’s line when they’re available, and we tell you up front when a matching aftermarket part is the right call instead. Either way, the material is confirmed in your written price before we order. Call (866) 616-0837 to check availability for your specific model.
Repair makes sense when the slab is sound and the issue is hardware, weatherstripping, or a single seal; replacement is usually the better call once the slab is cracked at the lock bore, delaminated, or bowed. On most Enterprise Fiber-Classic and Smooth-Star doors, a crack that starts at the deadbolt bore is the tipping point toward replacement. Call (866) 616-0837 for a free estimate and a straight answer on repair versus replace.
Most single-door replacements are completed in one day once the door and parts are on hand, and full frame work can add a few hours. Custom glass or non-standard sizing may add lead time for the part to arrive. Call (866) 616-0837 and we’ll give you a realistic timeline before you commit.
Yes – we handle Therma-Tru front door replacement throughout Enterprise and the surrounding area. Tell us your address when you call and we’ll confirm the visit details, including the name and photo of the technician assigned to you. Call (866) 616-0837 to get started.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.