New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
PGT Front Door Replacement in Enterprise: What to Know First
PGT front door replacement in Enterprise typically runs $2,400 to $5,800 for a full entry system, and most jobs are measured, ordered, and installed within three to five weeks. The wide range reflects real differences in door size, glass package, and whether the frame is staying or going. We’re an independent PGT service provider, which means we work on PGT doors without any manufacturer authorization, and we quote every job in writing before a single tool comes out of the case.

This page is for Enterprise homeowners who already have a PGT entry door or door system and need it replaced, upgraded, or hauled back to a working state. Old PGT doors in the older neighborhoods around Enterprise can be repaired, but when the frame, threshold, and slab are all tired, replacement is usually the smarter money. Call (866) 616-0837 to schedule your free estimate.
How PGT Products Fail – and How We Fix Them
PGT builds serious door and window systems, and they hold up well in Southern Nevada. But Enterprise sits in one of the harshest door environments in the country: 100-plus degree summers, single-digit winter humidity, and constant sun exposure on west- and south-facing entries. That combination finds every weak point. Here’s what we actually see on PGT entry doors in Enterprise.
- Sun-baked door slabs and finish breakdown on the PGT aluminum-clad lines. PGT entry doors built on aluminum-clad wood slabs take intense UV on a south-facing entry, and the factory finish starts to chalk and micro-crack while the wood core behind it takes on moisture in the winter rains. We see this on doors that look fine from three feet away and feel soft at the bottom rail. Our fix is a full replacement with a properly flashed frame and a UV-stable finish, not a repaint over failing substrate.
- Failing weatherstripping and threshold seals on PGT hinged entry doors. The kerf-set weatherstripping and door sweep on PGT hinged doors compress and dry out in Enterprise’s low humidity, then let in dust and hot air. Homeowners notice the door “whistles” or a fine grit line on the floor inside. We replace the full perimeter seal and threshold, not just the sweep, because partial fixes on a 15-year-old seal kit fail again within a season.
- Warped or sticking slabs from seasonal movement. Wood-core and composite slabs on PGT swinging doors can bow as the two-season cycle of wet winter and dry summer works the material. The symptom is a door that drags at the top in July and rubs at the strike in January. Adjustment buys time, but a bowed slab can’t be straightened, and we tell homeowners that plainly before quoting a replacement.
- Hinge and strike-plate fatigue on heavier PGT fiberglass and wood entry systems. Heavier slabs with multiple glass lites stress the hinge screws and the strike plate over time, especially on doors that face the afternoon sun and see thermal movement daily. Loose screws pull out of the jamb, and the door starts to sag. On a replacement, we reinforce the jamb and set a proper strike plate rather than just driving longer screws into tired wood.
- Failed glass seals and desiccant fogging in PGT decorative and insulated entry glass. The insulated glass units in PGT decorative entry doors can lose their perimeter seal, and moisture works into the air space, fogging the glass or leaving a milky haze on the bottom edge. This one is glass, not door, and on a door worth keeping, we can often replace just the glass unit. On a door at the end of its life, the failing glass is the signal to replace the whole system, because it usually means the frame seals are gone too.
Our PGT Front Door Replacement Process
A PGT job done correctly is a measured job, not a guess. Here’s exactly how a PGT front door replacement runs with us in Enterprise.
- 1
Call and schedule. A live person answers every call, day or night, and gets you on the schedule. No voicemail, no callback queue.
- 2
Threshold Standard visit. Your technician is background-checked, identity-verified, uniformed, and photo-badged, and you get their name and photo before the visit. You know exactly who’s coming before you open the door.
- 3
Measure and quote in writing. We measure the rough opening, check the frame for rot or movement, assess the sill and threshold, and confirm the PGT door model and glass package. You get a written price before any work begins, with no change orders unless you change the scope.
- 4
Parts decision. On a repair we use OEM PGT hardware where it’s available, and quality aftermarket hardware only where OEM isn’t, and we tell you which is which. OEM keeps the original fit and warranty intact; aftermarket saves money but can change the look. On a full replacement, the new PGT door ships with the correct frame and glass from the factory.
- 5
Install and test. Old door and frame come out, the opening is prepped and flashed, and the new PGT system is set and shimmed. We test the swing, the latch, the weatherseal, and the threshold seal before we leave.
- 6
365-Day Done Right Promise. Every job carries the written guarantee. If the work isn’t right in the first year, we make it right. If a repair fails, the second visit is free.
What PGT Front Door Replacement Costs in Enterprise
Here’s what PGT front door work runs in Enterprise. These are real ranges, and the final written price comes from the actual measurement, not a phone estimate.
| PGT front door scenario | Typical installed range |
|---|---|
| Glass replacement only (PGT decorative entry glass unit) | $350 – $850 |
| Hardware and weatherseal rebuild on PGT hinged entry door | $280 – $650 |
| Single PGT entry door replacement, frame staying | $1,900 – $3,200 |
| Single PGT entry door replacement with new frame | $2,400 – $4,200 |
| PGT entry door with sidelites or a full entry system | $3,500 – $5,800 |
What moves the price: door size and glass package, whether sidelites are involved, frame condition, and finish. Call (866) 616-0837 for a free estimate and a written price before any work starts.
Why Enterprise Homeowners Call Hale Windows & Doors Enterprise for PGT Work
Part of it is the guarantee: the 365-Day Done Right Promise is a written, named guarantee on every job, and if we get it wrong we fix it. Part of it is the price: a written price is in your hands before any work begins, on every PGT job. Part of it is the Threshold Standard, the five-step process that tells you exactly who is coming to your door, by name and photo, before they arrive.

And part of it is product depth. We service and install eight professional lines, PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, so we match the door to your job instead of pushing one brand. Our technicians have up to 17 years of experience. On PGT front door replacement in Enterprise, that combination of a written price, a known technician, and a written guarantee is the whole reason people call. We’re independently owned and operated, part of the Threshold Group family, and live phone support is available around the clock.
FAQs
Replacing a PGT front door doesn’t void a PGT warranty on the rest of the home’s PGT products, but it can affect coverage on the door being replaced. As an independent PGT service provider, we install to spec so the factory finish and glass warranty stay intact where they apply, and we tell you in writing before the job what’s covered and what isn’t. Call (866) 616-0837 for an exact answer on your specific PGT door.
On PGT hardware and seals, OEM parts are available for most current and recent model lines, and we use them where we can. On discontinued lines, we use quality aftermarket hardware and tell you exactly what’s changing. On a full replacement, the new PGT door comes with factory frame, glass, and hardware, so the parts question goes away. Call (866) 616-0837 to check parts for your PGT model.
Repair your PGT front door if the frame is solid, the slab isn’t bowed, and the problem is hardware, seals, or glass. Replace it if the slab is warped, the frame has rot or movement, or the door has failed in multiple places at once. In Enterprise’s climate, a door that’s 15 years or older with a bowed slab is usually a replacement, not a repair. Call (866) 616-0837 for a free estimate that tells you the difference on your door.
A single PGT entry door replacement takes one day for the install once the door arrives, and most jobs are measured, ordered, and installed within three to five weeks to account for lead time on factory PGT units. Glass-only and hardware jobs are often much faster. Call (866) 616-0837 to get your job measured and on the schedule.
No. Your written price holds unless you change the scope, and we tell you in writing before the job starts if anything in the frame or opening could change it. That’s the whole point of a written price in your hands before any tool comes out. Call (866) 616-0837 for a free estimate.
Get Your PGT Front Door Quote in Enterprise
If your PGT entry door is fogging, dragging, whistling, or just past its years, the next step is a measured, written price. Call (866) 616-0837 to schedule your free estimate, get a written quote before any work begins, and know exactly who is coming to your door, by name and photo, before they arrive. Live phone support is available 24 hours a day. We’re independently owned and operated, part of the Threshold Group family, and we’re here for Enterprise homeowners who want the job done right and in writing.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.