New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Why Enterprise Homeowners Choose Mr-Glass Windows & Doors
Hale Windows & Doors Enterprise provides independent Mr-Glass window and door service across Enterprise, NV – repair, glass unit replacement, roller and hardware work, and full insert replacement of failed units. We’re not the factory and we don’t claim to be; we’re a local service team that knows the Mr-Glass vinyl line specifically, down to which roller assemblies fit which track and which fogged dual-pane units can be re-glazed without tearing out the frame.

What makes our Mr-Glass work different is the same thing that makes all our windows and doors work different: a written price before any tool comes out, a background-checked, photo-badged technician pre-announced by name, and a 365-Day Done Right Promise stamped on the job. In a suburb where most of the housing stock went up in the same two decades, Mr-Glass windows are failing on a schedule, not at random – and knowing that changes how we diagnose them.
Why Trust Hale Windows & Doors Enterprise for Your Mr-Glass Windows & Doors?
Our technicians have up to 17 years of experience, and a good share of that has been spent on Mr-Glass vinyl single-hungs, double-hungs, horizontal rollers, and the impact-rated line. That matters because Mr-Glass is a dealer-driven product: independent window companies install and service it, and the units in Enterprise walls were put there by installers, not by a factory service department. The person who actually knows your window is the one who has pulled these sashes a hundred times, not a call center reading a script.
We use OEM-compatible and factory-original parts where they’re available for your specific Mr-Glass series, and quality aftermarket parts sized to your existing track and frame where originals have been discontinued. That’s the honest version of parts sourcing, and it’s what keeps a repair warranty-safe rather than creating a mismatch the factory could point to later. We also tell you clearly when a part no longer exists – because chasing a discontinued sash profile wastes your money, not ours.
Every repair we do on a Mr-Glass unit carries a written guarantee, and if the repair fails within that window, the second visit is free. It’s stated on paper before we start, and it’s the same standard we hold whether the job is one fogged IGU or three sliding doors.
Common Mr-Glass Windows & Doors Problems We Fix in Enterprise
Enterprise sits under some of the harshest sun in the Las Vegas Valley, and the failure patterns on Mr-Glass vinyl follow directly from that. Here’s what we see most, tied to the actual cause:
- Horizontal roller windows where the sash drags, jumps the track, or drops out of the frame pocket. This is almost always the tandem roller wheels – they flatten under the weight of the sash and the heat cycling, or they seize with grit and desert dust. In summer, a roller that was fine in February can bind by July. We pull the sash, inspect the wheels, and replace the roller assemblies with a matched size rather than forcing the old ones to limp along.
- Dual-pane IGUs fogging or developing a hazy film between the panes. That milky look is a failed seal – the desiccant inside the insulated glass unit has saturated and the barrier is gone. It’s not a cleaning problem and it won’t clear on its own. On Mr-Glass vinyl frames we replace the glass unit itself where the frame is sound, which is far cheaper than replacing the whole window.
- Weatherstripping and pile seals drying out, shrinking, and separating on sliders and single-hungs. Enterprise’s low humidity and intense UV cook the seals faster than in most climates. Once they separate, dust and hot air come straight through, and you feel it on a windy day before you see it. Replacing the pile seals restores the seal line without touching the glass.
- Corner welds or glazing beads cracking and pulling apart on sun-exposed vinyl. West- and south-facing units take the worst solar load, and after 15 – 25 years the vinyl can crack at the welded corners or the glazing bead can pop loose. Whether that’s repairable depends on frame integrity – a cracked weld that’s still holding may be fine; one that’s opening is a different call.
- Screen frames bowing out of track on sliders and single-hungs. Heat warps the aluminum screen frame over time and the frame no longer seats in the track. Sometimes it’s a re-screen; sometimes it’s a new frame sized to the opening.
A common scenario in Enterprise goes like this: a Mr-Glass horizontal roller window on a sun-facing wall suddenly drags at the bottom and won’t slide smoothly, or a fixed pane shows a milky fog between the two panes. The drag is usually flattened tandem rollers or a grit-filled track, fixed by pulling the sash, cleaning the track, and replacing the roller assemblies. The fog is a failed IGU seal that means a new glass unit or sash swap. A qualified local pro confirms the cause, checks the frame welds and seals while the unit is apart, and resets the sash so it tracks and latches correctly. The trap is assuming the two symptoms are the same problem – they aren’t, and fixing one when it’s actually the other just moves the cost around.
Mr-Glass Parts & Our Repair-vs-Replace Approach
For Mr-Glass repairs we source parts per job, matched to the specific series and track size of your unit. We don’t claim parts on hand or stocked locally – rollers, pile seals, weatherstripping, glazing beads, screens, and hardware are ordered to fit, and factory-original glass and sash assemblies are used where they’re still available for your model. When a part is discontinued, we say so plainly rather than substituting something that doesn’t fit.
The repair-versus-replace line we draw is on frame integrity, not age. A 20-year-old Mr-Glass vinyl frame with sound welds and intact glazing beads is a repair candidate all day long – new rollers, new seals, new glass unit, and it’s back in service. A frame with welded corners that have failed or a sash profile that’s no longer made is the honest candidate for replacement, because at that point we’d be chasing a part that doesn’t exist instead of solving your problem. That distinction is the whole conversation, and it’s why we diagnose before we quote. Call us for a written estimate – it’s free and there’s no pressure to decide on the spot.

Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We pull the sash where needed, test the rollers and track, check the IGU seal, look at the welds, glazing beads, and pile seals while the unit is apart – and confirm the actual cause before any part is ordered.
- 2
Written price. You get the diagnosis in plain words and a written price for the repair, the parts, and any alternative, before anyone picks up a tool.
- 3
Repair or install. Rollers, seals, glass units, and hardware go in matched to your Mr-Glass series. Where the unit is beyond repair, we install a replacement window inserted into the existing opening, so the surrounding stucco and trim stay intact.
- 4
Test and promise. We slide, latch, and check the seal on the unit before we leave, then leave you the written guarantee – with the free second visit if the repair fails, and the 365-Day Done Right Promise behind the whole job.
Mr-Glass Products We Service & Install in Enterprise
We work on the Mr-Glass vinyl line specifically: Mr-Glass vinyl single-hung and double-hung replacement windows, the horizontal roller (slider) windows, the 3-lite (3-panel) sliding roller windows, and the Mr-Glass vinyl impact/hurricane-rated window line. That covers glass unit replacement, roller and hardware work, weatherstripping and pile seals, glazing beads, screens, and full insert replacement where the frame calls for it. If your unit isn’t in this list, tell us what you have and we’ll tell you straight whether it falls inside what we service.
On the install side, we also handle insert window replacement across our eight product lines – PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. We match the product to the job rather than pushing one brand, and with this many lines we can usually find what fits your opening and your budget.
We Also Service These Brands
Mr-Glass is one brand in a field of good ones, and Enterprise homes have a mix. We service and install PGT, CGI, CWS, and ES Windows, along with ECO Window Systems, Therma-Tru, and ViewLux – so if you’re replacing a whole sun-facing wall, you’re not locked into one product family. We’ll help you compare the options in writing.
FAQs – Mr-Glass Windows & Doors Service in Enterprise
No. We are an independent Mr-Glass service provider, not affiliated with or authorized by Mr-Glass, and we don’t imply otherwise. Mr-Glass is a dealer-driven line, and we service the units already in Enterprise homes as an independent local provider. If your work is under an active manufacturer warranty, we’ll tell you what that warranty covers before we touch the unit, so you can decide how to proceed.
Where OEM parts are still available for your series, yes – factory-original glass and sash assemblies are used when we can get them. For rollers, weatherstripping, pile seals, and hardware, we use quality aftermarket parts sized to your existing track and frame when originals are discontinued. We’ll tell you which is which in the written price before work starts.
Most single-unit repairs – a roller set, a pile seal replacement, a glass unit swap – take a single visit. The part order is the variable, not the labor, and we’ll give you a realistic timeline in writing rather than promising a date we can’t hold. Call to schedule and we’ll quote it out.
We cover the Mr-Glass vinyl single-hung and double-hung replacement windows, horizontal roller (slider) windows, 3-lite sliding roller windows, and the impact/hurricane-rated vinyl line. If you’re not sure which series you have, a photo of the sash or the track usually settles it.
It can, if a third party modifies the unit in a way the manufacturer’s warranty doesn’t cover – which is why we document what we do and use OEM-compatible parts that fit. We’ll tell you plainly before we start if a given repair could affect your manufacturer coverage. Your repair also carries our own written guarantee, so you’re covered on our side either way.
Typical Mr-Glass repairs in the Enterprise market run a few hundred dollars for a roller replacement or pile seal job, a bit more for a glass unit swap, and higher for insert replacement of a full window. The exact number depends on your series and part availability, which is why we quote in writing before work begins. Call (866) 616-0837 for an exact quote – estimates are free.
Book Your Mr-Glass Service in Enterprise, NV
Whether it’s a slider that’s started to drag, a pane that’s fogged over, or a sun-facing wall full of vinyl that’s hitting its replacement window, we’ll diagnose it, put the price in writing, and back the work with our 365-Day Done Right Promise. Our technicians have up to 17 years of experience on this line, and every visit is pre-announced by name and photo. Call (866) 616-0837 for your free estimate.
Written by the team at Hale Windows & Doors.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.