New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Window Repair in Enterprise: What to Know First
We provide independent Mr-Glass window repair in Enterprise, and most single-window jobs are diagnosed and fixed in one visit once the right parts are on hand. Repairs generally run $145 to $420 depending on the series and what failed – not the brand name on the frame. We give you a written price before any work starts, and every repair carries a written guarantee with a free second visit if it fails.

This page is for homeowners who already have Mr-Glass windows in the wall and need them working again. We’re an independent Mr-Glass service provider, not affiliated with or authorized by the manufacturer. If a pane is fogged, a sash won’t slide, or a lock has gone loose, call (866) 616-0837 and we’ll schedule a free estimate in Enterprise.
How Mr-Glass Products Fail – and How We Fix Them
Mr-Glass covers a few product families, and the failure modes aren’t identical across them. Here’s what we actually see on Enterprise homes and what we do about each.
- Fogged dual-pane units in the vinyl slider series. The seal between the panes breaks and moisture gets in, so the glass goes cloudy from the inside. You can’t clean it out. We replace the insulated glass unit (IGU, the sealed sandwich of two panes) rather than the whole window, which keeps the frame and the original look. On a standard slider IGU that’s usually the least expensive path.
- Sash that drags or won’t slide on single-hung and slider frames. In Enterprise, the dry desert air and heavy summer dust work on the weatherstripping and the roller or balance hardware. The sash starts sticking and then jumps. We replace rollers and balances and re-set the weatherstripping. Here’s the detail most owners miss: a dragging sash is often a shifted frame, not a worn roller, and replacing rollers alone won’t fix it.
- Failed balances on tilt-in sashes. The balance (the spring mechanism that holds the sash up) lets go and the window won’t stay raised. It’s a wear item, especially on windows that get opened daily. We match the balance to the sash weight and the exact series – a generic balance of the wrong rating will sag within months.
- Loose or misaligned locks and latches. The keeper pulls out of the frame or the latch stops catching. Sometimes it’s just hardware; sometimes the sash has dropped slightly. We realign the sash and replace the lock hardware so the window latches flush again.
- Failed seals and water intrusion at the frame. Wind-driven dust and the occasional monsoon push water past dried-out seals and perimeter caulk. We re-seal the perimeter and check the weep system so water drains instead of sitting. Left alone, this is the failure that turns into rot.
On parts: we use OEM (original manufacturer) components when they’re available and the fit matters, and quality aftermarket parts when they perform the same and cost less. We tell you which one we’re using and why before we start.
Our Mr-Glass Window Repair Process
- 1
Call and schedule. A live person answers every call, day or night. We book a free estimate and confirm the visit.
- 2
Know who’s coming. Under our Threshold Standard, your technician is background-checked, identity-verified, photo-badged, and sent to you by name and photo before the visit. No surprises at the door.
- 3
Diagnose the actual failure. We identify the Mr-Glass series, test the balance, rollers, seals and glass unit, and separate the real cause from the symptom. This is where a dragging sash gets correctly traced to the frame instead of the roller.
- 4
Parts decision, in writing. You get a written price with the OEM-versus-aftermarket choice spelled out. Nothing gets ordered until you approve it.
- 5
Make the repair. Glass unit, hardware, re-seal, realignment – whatever the diagnosis calls for, done to the series.
- 6
Test and clean up. We open, close, latch and check the window with you before we leave, then clean the work area. Your repair is covered by a written guarantee and the 365-Day Done Right Promise.
What Mr-Glass Window Repair Costs in Enterprise
Prices depend on the series and what failed, not the brand. These are the ranges Enterprise homeowners typically see:
- Hardware and adjustment (rollers, balances, locks): $145 – $260 per window
- Insulated glass unit (IGU) replacement for a fogged pane: $220 – $420 depending on size and glass type
- Perimeter re-seal and weatherstripping: $160 – $300
- Multiple windows on one visit: priced per window, with the diagnostic rolled in
What moves the price: glass size and type, whether OEM parts are needed, and how many windows you’re doing at once. What doesn’t move it: the written price you approved. It’s what you pay. Call (866) 616-0837 for a free estimate – we’ll give you the number in writing before anyone touches the window.
Why Enterprise Homeowners Call Hale Windows & Doors Enterprise for Mr-Glass Work
Mr-Glass is one of eight professional lines we service – the others include PGT, CGI, CWS, ES Windows, ECO Window Systems, Therma-Tru and ViewLux – so when a window crosses from repair into replacement, we’re not guessing. Our technicians have up to 17 years of experience and know the difference between a worn balance and a shifted frame on your series.
We give you a written price before work begins, back every repair with a written guarantee and a free second visit if it fails, and stand behind it all with the 365-Day Done Right Promise: if it’s not right, we make it right. And you’ll know exactly who’s at the door before you open it. Hale Windows & Doors Enterprise is independently owned and operated, part of the Threshold Group.
FAQs
Replacing hardware, glass or seals with proper parts generally won’t void a manufacturer warranty, but the terms vary by product line. We’ll flag anything that could affect your coverage before we start, so there are no surprises. As an independent service provider, we coordinate around the manufacturer terms rather than speak for them. Call (866) 616-0837 with your window series and we’ll talk it through.
Yes – for most current series, balances, rollers, locks and glass units are available, and we source OEM when fit matters and quality aftermarket when it performs the same for less. For older or discontinued lines, we identify the closest correct match. Call (866) 616-0837 with the series or a photo and we’ll confirm availability at your free estimate.
Repair is usually the right call when the frame and sash are sound and only the glass unit or hardware failed – that’s most fogged-pane and dragging-sash jobs. Replace when the frame is warped, rotted or leaking at the perimeter beyond re-sealing. We’ll tell you honestly which one your window needs at the estimate, with a written price for each.
Most single-window repairs are handled in one visit once the right parts are on hand, and parts-dependent jobs are scheduled once they arrive. We don’t rush a diagnosis to hit a clock. Call (866) 616-0837 to book your free estimate and we’ll tell you the realistic timeline for your series.
We repair single windows – no minimum. Many homeowners start with the one fogged or sticking window and add others once they see the result. A live person answers every call, day or night, so it’s easy to add a window to an existing estimate. Call (866) 616-0837 to get started.
Call (866) 616-0837 for a free estimate on your Mr-Glass window repair in Enterprise. You’ll get a written price before any work starts, a technician announced by name and photo before the visit, and a repair backed by the 365-Day Done Right Promise. We’re glad to help you get that window working again.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.