New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Window Installation: The Enterprise Owner’s Guide
Mr-Glass window installation in Enterprise typically runs $420 to $1,150 per window installed, depending on frame material, glass package, and whether the opening needs reframing; most single-window swaps are completed in a few hours once the unit is on site. You’re usually reading this page because something already went wrong: a fogged pane you can’t see through, a sash that won’t slide, water staining the drywall under the frame after a monsoon. That’s the moment Enterprise homeowners start hunting for a straight answer on what a real Mr-Glass replacement costs and who should install it.

Which Mr-Glass Models This Applies To
Mr-Glass builds across several product families, and the part that matters most isn’t the glass – it’s the frame series and the rough opening. Aluminum single-hung and horizontal slider units from the builder-grade lines are the most common in Enterprise tract homes built through the 1990s and 2000s, while newer vinyl double-hung and casement lines show up in the master-planned neighborhoods off Horizon Ridge and around the Equestrian Drive corridor. Before anything gets ordered, we confirm three things: the manufacturer label on the upper sash channel or the head jamb (it lists the series code and glass designation), the exact rough opening measured in three places per side, and the glass package stamped on the spacer – typically a low-E coating (a thin metallic layer that blocks solar heat while letting visible light through) paired with argon fill. Skip the label and you’ll order a unit that’s a quarter-inch off and won’t seat.
OEM versus aftermarket is a real decision for Mr-Glass specifically. OEM sashes match the original extrusion profile and color lot, which matters if you’re replacing one window in a visible row. A quality aftermarket equivalent from a professional line can cost 15 to 25 percent less and perform the same on glass and hardware, but the frame profile won’t match a neighboring OEM unit exactly. We install Mr-Glass along with PGT, CGI, and CWS, so we can tell you honestly which path makes sense for your wall – and we’re an independent service provider, not affiliated with Mr-Glass.
Signs Your Mr-Glass Window Installation Is Failing
Enterprise sits in a high-desert climate that swings from 105°F summer afternoons to below-freezing winter nights, and that thermal cycling is what breaks window assemblies here faster than in milder markets. Watch for these five:
- Fogging or condensation between the panes. The sealed insulated glass unit (IGU) has lost its argon and its desiccant is saturated. Once the seal fails, the unit won’t clear – it needs replacement, not cleaning.
- Water intrusion or staining at the interior sill. Failed perimeter sealant or a missing head flashing lets monsoon-driven rain past the frame. In Enterprise we regularly see this on west-facing walls where UV has cooked the original caulk joint brittle.
- A sash that sticks, drags, or won’t latch. Usually a worn balance, a failed tilt-pivot, or a frame that’s racked slightly out of square. Sometimes it’s the operator hardware; sometimes the whole unit has shifted.
- Draftiness or a rattling frame in wind. Weatherstripping has compressed flat, or the frame wasn’t shimmed and anchored properly at install. Poor anchoring is a common failure in older installs and shows up as gaps at the corners.
- Condensation on the interior glass surface in winter. That points to a failing seal combined with interior humidity – a sign the unit’s thermal performance has degraded and it’s time to price a replacement.
Replacement Cost & What’s Included
Installed pricing for Mr-Glass and comparable professional lines in Enterprise breaks down roughly like this:
| Scope | Typical Installed Range |
|---|---|
| Single fixed or picture window, standard size | $420 – $680 |
| Single-hung or slider, vinyl, standard size | $550 – $850 |
| Double-hung with low-E and argon | $680 – $1,050 |
| Casement or large custom unit | $850 – $1,150+ |
| Reframing or rough-opening correction (if needed) | $150 – $400 add |
The range is driven by size, glass package, frame material, and whether the opening is square. You get a written price in your hands before any work starts – parts and labor itemized, no surprise line on the invoice. Every install carries the 365-Day Done Right Promise: if it’s not right, we make it right. Glass and unit defects are covered by the manufacturer’s warranty; our labor and installation workmanship are covered by ours.

DIY or Call Us?
You can safely measure your rough opening, photograph the manufacturer label, and check whether the fogging is between the panes or on the room-side surface. What you shouldn’t do is pull an existing unit out of a second-story wall or attempt to reset a frame that’s come out of square – window openings are structural, and a bad reinstall invites water intrusion into wall cavities that costs far more to fix than the window did. There’s no spring-tension or electrical hazard in a standard window swap, but lifting a full insulated unit, sealing a rough opening correctly, and flashing the head properly are jobs where experience matters. If you’re unsure whether your unit is repairable or needs a full replacement, call us at (866) 616-0837 – a trained technician will give you a straight answer and a written price.
FAQs
Expect 15 to 20 years for the frame and glass unit, but the sealed glass unit often fails sooner in Enterprise’s climate – the intense UV and daily thermal swing commonly shorten IGU life to 10 to 15 years. If your unit is past that and fogging, replacement is usually the better spend.
Sometimes – a worn balance, a bad latch, or a failed operator can be repaired without touching the glass. But once the sealed unit fogs between the panes or the frame is water-damaged or out of square, replacement is the honest answer. We’ll tell you which one you’re facing before you commit.
A standard single-window install is typically a few hours, and most multi-window jobs finish in one to two days depending on access and how many openings need reframing. You’ll know the schedule before we start.
We match the manufacturer label and series code on your existing unit, verify the rough opening with field measurements, and order the correct profile and glass package – OEM or a professional-grade equivalent, your call. We don’t carry parts on a truck; the right unit gets ordered to your window, not guessed at.
Every technician who comes to your door is background-checked, identity-verified, photo-badged, and introduced to you by name and photo before the visit through our Threshold Standard – so you know exactly who’s at the door. Call (866) 616-0837 to schedule your free estimate and get a written price for your Mr-Glass window installation in Enterprise.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.