New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Sliding & Patio Doors: The Enterprise Owner’s Guide
We install and service Mr-Glass sliding and patio doors throughout Enterprise, and a full door replacement in this market typically runs $1,850 to $4,200 installed depending on size, glass package, and frame material. Roller, track, and hardware repairs, the most common reason people call us, usually land between $145 and $390. We’re an independent service provider, not affiliated with Mr-Glass; we just work on their products often enough to know them well.

The failure usually announces itself slowly. The door starts dragging near the strike side in July, then needs a shoulder to close by August. Or the glass fogs from the bottom corner after a monsoon-season temperature swing, and no amount of wiping clears it. By the time an Enterprise homeowner calls us, the symptom has usually been building for a season or two.
Key Takeaways
- Roller and hardware repairs in Enterprise: roughly $145 to $390 installed.
- Full sliding or patio door replacement: roughly $1,850 to $4,200 installed.
- Every price is written before work begins, and every repair carries a written guarantee with a free second visit if it fails.
- Live person answers every call, 24 hours a day.
Which Mr-Glass Models This Applies To
Mr-Glass builds one of the eight product lines we install and service, alongside PGT, CGI, CWS, ES Windows, ECO Window Systems, Therma-Tru, and ViewLux. Their sliding and patio door range covers standard two-panel sliders, three-panel and four-panel configurations, and larger multi-slide units, and the parts that fail (rollers, tracks, locks, handles, weatherstripping) differ meaningfully between series.
The fastest way to identify what you have is the manufacturer’s label. On Mr-Glass units it’s typically a silver or white sticker on the top or side of the operable panel, or inside the frame channel on the jamb. That label gives you the series and sometimes a date code, which tells us what roller profile and hardware set the door was built with. If the label is gone, we measure the panel height and width, the track depth, and the roller housing style. Stamped steel rollers and nylon-tired rollers look similar on a phone photo but are not interchangeable, and getting this right is the difference between a door that rolls for a decade and one that starts grinding in eighteen months.
On the OEM versus aftermarket question: Mr-Glass factory parts are the safest exact match when the door is under about ten years old and the original profile is still produced. Past that, a quality aftermarket equivalent (stainless steel bearing rollers instead of the original nylon-tired style, for example) often outlasts the factory replacement in our desert climate. We tell homeowners which is which and price both, because the honest answer changes with the unit.
Signs Your Mr-Glass Sliding & Patio Doors Is Failing
- The door drags or needs a lift to slide. Usually a flat-spotted or seized roller, sometimes a track that’s been packed with grit. In Enterprise, we see this accelerate after spring winds carry fine dust into the bottom channel, and the roller grinds itself out over a few seasons.
- Visible track damage: kinks, grooves, or a raised lip. Aluminum tracks in this climate expand and contract hard across a summer day. A minor bend becomes a wear point that chews through new rollers fast, so the track usually needs attention at the same time as the hardware.
- The glass fogs between the panes. That’s a failed seal in the insulated glass unit, not surface condensation. Desert heat cycling (110°F afternoons, 70°F nights) is brutal on perimeter seals, and once moisture is inside, the unit has to be replaced; there’s no repair that gets it clear again.
- The lock won’t engage, or the door won’t latch. Often the door has dropped out of square because of worn rollers, so the lock and keeper no longer line up. Sometimes the lock mechanism itself has failed, which is a straightforward swap once we know the profile.
- Air or daylight around the edges. Weatherstripping and sweeps degrade in UV light faster here than in most of the country. A door that passed a dollar-bill test three years ago may now leak enough to show on your summer power bill.
Replacement Cost & What’s Included
Here’s what Enterprise homeowners typically see, installed, with the written price in hand before anyone picks up a tool:
| Work | Typical installed range |
|---|---|
| Roller replacement (pair) and adjustment | $145 – $240 |
| Track repair or replacement | $220 – $390 |
| Lock, handle, or latch replacement | $130 – $260 |
| Weatherstripping and sweep refresh | $110 – $220 |
| Insulated glass unit (IGU) replacement | $380 – $780 |
| Full sliding / patio door replacement | $1,850 – $4,200 |
The range is driven by panel size, glass package (low-E coatings and laminated options push the number up), frame material, and whether a track repair turns into a track replacement. On the door replacement side, the biggest swing factors are width and configuration: a standard six-foot two-panel slider sits near the bottom, a multi-slide unit goes well past the top. Parts and labor are broken out line by line. Every repair carries a written guarantee, and if it fails, a second visit is free. On replacements, the 365-Day Done Right Promise applies: if the work isn’t right, we make it right.
DIY or Call Us?
Some things are safe to check yourself. Slide the door slowly and listen for where it grinds. Look down the track with a flashlight for grit, bends, or a raised edge. Check the label for your model and series. Try the dollar-bill test around the perimeter for air leaks. Wipe the track and vacuum the channel, which is genuinely useful maintenance out here.
Where it goes wrong: lifting a heavy glass panel out of the track to access rollers. A tempered glass panel, especially on a larger patio door, is heavy, awkward, and unforgiving if it slips, and the frame channel is easy to bend on the way out. Once the door is out of square, you’re looking at a more expensive repair than the one you started. We’ve seen homeowners in Enterprise end up with a cracked panel and a bent track from a job they thought would take twenty minutes. If you’re looking at that panel and having second thoughts, call us and describe the door; we’ll tell you what it likely needs and whether an adjustment alone can do it. If it’s more than a cleaning, let someone with the right equipment handle it.
FAQs
A well-built Mr-Glass slider should give you 20 to 25 years of service, but the parts inside it don’t. Rollers, weatherstripping, and sweeps typically wear out in 8 to 15 years here because the dust and summer heat cycling work on them season after season. The glass unit itself is usually the first thing to show failure (fogging), often before the decade mark. If your door is dragging or fogged, call us at (866) 616-0837 for a free estimate.
Yes, most of the time. Worn rollers, a damaged track, a failed lock, and tired weatherstripping are all repairable, and a repair in the $145 to $390 range handles the large majority of what we see in Enterprise. Replacement makes sense when the frame is bowed, multiple IGUs have failed, or the door has reached an age where the parts are no longer produced. We’ll tell you which side of that line you’re on and give you the written price either way. Call (866) 616-0837 and we’ll take a look.
A roller or hardware swap typically takes one to two hours on site, and an insulated glass unit replacement usually runs two to four hours depending on the size and how the unit is glazed. A full door replacement is generally a full day, occasionally two if the opening needs work. We give you a realistic window in writing when we quote, not a best-case guess. Call (866) 616-0837 to schedule your free estimate.
We identify your series from the door label or, if it’s missing, from precise measurements of the panel, track, and hardware, then source either the factory part or a compatible high-quality equivalent and price both for you. You see what’s being installed and what it costs before work starts. We don’t claim to carry Mr-Glass parts on a truck or stock them locally; we match the part to the door and bring the right one. Call (866) 616-0837 with your door information and we’ll get you a written price.
Every technician who comes to your door is background-checked, identity-verified, photo-badged, and sent to you by name and photo before the visit, so you know exactly who’s coming. Our technicians have up to 17 years of experience. When you’re ready to price the work, call (866) 616-0837 for a free estimate with a written price in hand before anything begins.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.