A Hale company - serving Enterprise, NV
M

Mr-Glass Door Installation in Enterprise, NV

New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.

1

Choose your installer

The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.

Talk to a real person →

2

Select the right products

Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.

Compare the lines →

3

Prepare your home for install

Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.

Get the install checklist →

Compare the Lines We Quote

Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.

PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
  • More impact certifications than any other line we quote
  • WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
  • 99% on-time delivery keeps your install date on the calendar
See it quoted on your openings →
CGIThe heavyweight impact line$$$$$
  • Large-missile impact ratings for the strictest wind zones
  • Architectural-grade aluminum with commercial-depth frames
  • The line we quote when protection is the whole point
See it quoted on your openings →
CWSThe value pick$$
  • Vinyl systems built to strict wind codes
  • Strong energy packages at the friendliest price point
  • The smart start for whole-home replacements on a budget
See it quoted on your openings →
ESWSlim lines, big glass$$$$
  • Narrow-sightline aluminum for modern elevations
  • Oversized openings and floor-to-ceiling glass
  • Impact-rated without the bunker look
See it quoted on your openings →
ECOThe aluminum impact workhorse$$$
  • Factory-built aluminum impact systems
  • A strong price-to-protection ratio for coastal homes
  • Proven lines with short lead times
See it quoted on your openings →

Mr-Glass Door Installation: The Enterprise Owner’s Guide

We install and service Mr-Glass door systems across Enterprise, and the typical installed price for a full door replacement with a Mr-Glass-compatible unit runs $1,850 to $4,200 depending on size, glass package, and frame condition. The work is planned, not same-day – most installs are scheduled within one to two weeks of your free estimate. Owners usually find their way here when a door sags against the strike plate, a hinge on a heavy glass unit starts pulling from the frame, or the door stops latching cleanly in summer heat and the gap only gets worse.

Modern corner window installation in a contemporary bedroom overlooking scenic greenery in Enterprise, NV

Call (866) 616-0837

Mr-Glass doors are common in the newer builds and remodeled entries throughout Enterprise and the southwest valley. When one fails, it tends to fail in a way that’s obvious at the handle before it’s obvious anywhere else. We’ll walk through how to tell a repairable problem from one that needs a new door, what it costs in Enterprise specifically, and how the sourcing actually works.

Which Mr-Glass Models This Applies To

Mr-Glass builds entrance doors, patio sliders, and French door units with a range of frame profiles and threshold heights. The door itself may carry a small label on the top edge or hinge jamb (often inside a metal door, in the latch-side channel) with the model series and a code. If the sticker is gone, we identify the unit by frame profile, door thickness, hinge spacing, and the exact width of the operating panel measured at the frame stops – never at the visible sash edge, which runs roughly 1/8-inch to 3/16-inch wider than the opening it’s replacing.

The OEM-versus-aftermarket decision matters here. Mr-Glass frames take a proprietary threshold riser and a hinge set with a specific screw pattern on many series; a generic replacement hinge of the same size but a different pattern will not seat flush and the door will drag within a season. For hinge and hardware failures, the practical answer is often a matched replacement hinge (a proper spec match, not a lookalike). For a homeowner, the OEM part is the safe call when the model is still supported.

Signs Your Mr-Glass Door Installation Is Failing

  • The door drags or scrapes on the threshold. This usually means the hinge has dropped or the threshold has settled – a shift you’ll notice first at the lock-side bottom corner.
  • You can see daylight around the perimeter when the door is shut. Weatherstrip compression is failing, and in Enterprise’s summer heat the expanded frame can make the gap read smaller than it actually is.
  • The handle feels loose and the latch doesn’t catch cleanly. A worn strike plate or a hinge out of alignment will do this before the lock itself is at fault.
  • The glass unit fogs or shows a haze between panes. That’s a seal failure in the insulated glass, and replacing just the glass is often cheaper than a new door.
  • The frame moves or shows a crack at the jamb corner. Foundation movement or moisture intrusion is the underlying cause here, and a new door alone won’t fix it until the jamb condition is addressed.

Replacement Cost & What’s Included

Installed pricing for a Mr-Glass-compatible door in Enterprise:

Item Typical range
Standard entry door replacement (single, Mr-Glass-compatible) $1,850 – $2,600
Patio slider replacement $2,400 – $3,900
French door unit replacement $3,200 – $4,200
Hinge, threshold, or hardware repair (per visit) $180 – $420
Glass-only replacement in existing frame $350 – $900

The range is driven by door size, glass package (low-E coating, impact-rated glass for some neighborhood builds), frame condition, and whether the rough opening needs any correction. Every quote is a written, line-item price you hold before any work begins – parts, labor, haul-away, all separate. Every install carries the 365-Day Done Right Promise: if the work isn’t right, we make it right. Repairs come with their own written guarantee, and if a repair fails, the second visit is free.

DIY or Call Us?

What you can safely do yourself: check whether the door latches at all, feel for a draft around the perimeter, look for haze inside the glass, and take a photo of any label on the door edge or hinge jamb. That information – model number, photo of the failing hinge or threshold – is genuinely useful when you call.

What you shouldn’t attempt: removing or replacing a heavy glass door panel yourself. A Mr-Glass entry door with laminated or insulated glass can weigh 100 pounds or more, and the frame is under tension when a hinge is backed out. A dropped panel is a serious injury risk and a shattered unit. Threshold and jamb work that involves moving the frame also risks water intrusion at the sill – an expensive problem to chase later. Call (866) 616-0837 and we’ll tell you honestly whether it’s a repair or a replacement.

FAQs

Contact

Hale Windows & Doors Enterprise works on Mr-Glass door systems across Enterprise, alongside the other professional brands we install and service – PGT, CGI, and CWS among them. We’re an independent provider, not affiliated with Mr-Glass, and every job comes with a written price up front, Threshold Verified technicians (background-checked, identity-verified, photo-badged, and announced by name and photo before the visit), and the 365-Day Done Right Promise on every install. Our technicians have up to 17 years of experience. Call (866) 616-0837 today for a free estimate on your Enterprise door – a live person answers, 24 hours a day.

Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.

Why Impact

Six Reasons Homeowners Choose Hale Windows & Doors Enterprise

Storm Protection

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.

Energy Savings

Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.

Noise Reduction

Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.

Burglar Resistant

Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.

Year-Round Comfort

Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.

Property Value

A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.

Other Services

Other Hale Windows & Doors Enterprise Services

Reviews

What Neighbors Say About Hale Windows & Doors Enterprise

★★★★★

"Fogged double pane in the living room. They replaced the glass units only, not the whole frame, and saved me a lot."

RRaul C.
★★★★★

"Vetted installers make me feel better having them inside. They were respectful and cleaned up all the old caulk and debris."

HHank V.
★★★★★

"Replaced eight old aluminum windows. The crew showed ID, wore shoe covers, and finished the whole job in two days. House is quieter and warmer."

BBarbara N.
★★★★★

"Energy bills dropped noticeably after the replacement. Install was neat and trimmed properly."

GGabriela L.
Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (866) 616-0837
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Hale Windows & Doors Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch