New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CWS Window Replacement in Enterprise: What to Know First
CWS window replacement in Enterprise typically costs $520 to $1,150 per opening for a full-frame install, and most jobs are completed in one to two days once the product arrives. We’re an independent CWS service provider, which means we install and service CWS products without any manufacturer authorization or affiliation, and we put a written price in your hands before anyone lifts a tool.

This page is for Enterprise homeowners who already own CWS windows: builder-grade units in the valley’s newer subdivisions, mid-series sliders and single-hungs on homes built through the 2000s, and the aluminum-frame windows common in the older rental-conversion stock near the Boulder Highway corridor. If your CWS glass is fogged, your frames are weeping, or your sliders have stopped tracking, call us at (866) 616-0837 for a free estimate.
Key Takeaways
- Enterprise’s swing between 105°F summer afternoons and cool desert nights stresses CWS vinyl and sealant in ways coastal installs never see.
- Fogged CWS insulated glass units (IGUs) usually mean a failed perimeter seal, not a broken pane, and sometimes replacement is cheaper than a full re-window.
- Every job comes with a written price before work begins and our 365-Day Done Right Promise.
How CWS Products Fail – and How We Fix Them
CWS windows fail in patterns, and the patterns differ by series and by climate. Enterprise sits at roughly 2,200 feet with single-digit humidity most of the year and a summer sun load that punishes anything sealed on the west and south elevations. Here’s what we actually see on CWS jobs around Enterprise.
- Failed IGU seals on CWS single-hung and slider units. The dual-pane sealed unit (the factory-assembled glass sandwich) loses its desiccant charge and clouds from the edges inward. In Enterprise we see this most on west-facing windows after eight to twelve summers, because the daily thermal swing works the butyl perimeter seal harder than in milder markets. Fix: we measure the unit, order a replacement IGU matched to the sash, and reset the stops and glazing.
- Vinyl frame distortion at the sill. CWS’s extruded vinyl frames can bow where afternoon sun hits dark-colored exterior trim, which throws the sash out of square and lets the lock miss its keeper. It’s a common complaint we hear in Enterprise from homeowners whose sliders “won’t latch all the way.” Fix: we check frame square with a level and a tape, and where the distortion is set we replace the affected unit rather than shimming a sash that will keep moving.
- Roller and track wear on horizontal sliders. Desert grit gets into the track channel and grinds the rollers flat, so the panel drags and eventually jumps the track. Fix: we pull the panels, clean and re-dress the track, and replace rollers with a quality aftermarket set sized to the CWS panel weight rather than a generic roller that wears out in two seasons.
- Weatherstripping and sweep deterioration. The pile weatherstrip and bottom sweep on CWS units dry out and crumble under UV, which shows up as a whistle at the meeting rail on windy days. Fix: we replace the sweep and pile with UV-stable aftermarket stock, and we tell you honestly when the sash itself is too far gone and replacement is the better spend.
- Hardware failure on casement and awning operators. Crank operators strip or seize when the hinge arm binds. CWS operators are available as aftermarket replacements, and we match the arm length and mounting pattern so the sash closes flush against the frame instead of standing proud.
Our CWS Window Replacement Process
Every CWS job runs the same way, whether it’s one fogged bedroom window or a whole-house replacement in the older sections of Enterprise.
- 1
Call and schedule. A live person answers, day or night, and books a free estimate at a time that works for you. Before the visit you’ll get the technician’s name and photo, so you know exactly who’s coming to the door.
- 2
On-site diagnosis. We measure every opening, check frame square, inspect the IGU seals, and test the hardware. You get a straight answer on what can be repaired and what should be replaced, with the reasons written down.
- 3
Parts decision. For a repair, we choose between OEM CWS parts and quality aftermarket equivalents, and we explain the trade-off in plain terms: OEM fits exactly and costs more, aftermarket is often just as durable and arrives faster. For a replacement, we spec the new unit to the opening and match the glass package to the elevation’s sun load.
- 4
The work. Full-frame replacement removes the old unit down to the rough opening and resets it with new flashing and sealant; insert replacement sets the new window into the existing frame when the frame is sound. Every job is quoted with a written price before work starts, and there are no change orders unless you approve them.
- 5
The test. We operate every sash, check the locks and weatherstrip, and water-test the perimeter seal on the exterior.
- 6
The guarantee. You get the written price, the written repair guarantee, and our 365-Day Done Right Promise. If a repair fails, the second visit is free.
What CWS Window Replacement Costs in Enterprise
Here are the ranges Enterprise homeowners see on CWS work. These are ballpark figures; your written quote is exact.
| Job | Typical Range |
|---|---|
| Replacement IGU only (fogged glass, sound frame) | $180 – $420 per unit |
| Insert window replacement (existing frame reused) | $380 – $720 per opening |
| Full-frame replacement (new frame and flashing) | $520 – $1,150 per opening |
| Slider roller, track, and sweep service | $120 – $260 per window |
| Energy-efficient glass upgrade (low-E, argon) | $90 – $220 added per opening |
What moves the price: opening size, whether the frame is sound enough for an insert, the glass package, second-story access, and how many openings you’re doing at once. Whole-house jobs cost less per window than single-window calls. Call us for a free estimate; the written price is in your hands before anything starts.
Why Enterprise Homeowners Call Hale Windows & Doors Enterprise for CWS Work
We’re independently owned and operated, part of the Threshold Group family, and we’ve been doing windows and doors since 2009. Our technicians have up to 17 years of experience, and they know CWS because we install and service it alongside PGT, CGI, ES Windows, and ECO Window Systems, so we can tell you honestly when a CWS repair makes sense and when a different line is the better replacement.

Here’s what that means at your door. Every technician is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit, because opening your door to a stranger is a real concern for a lot of Enterprise homeowners. You get a written price before work begins and a written guarantee on every repair. And a live person answers the phone around the clock, so you’re never left talking to a voicemail box. If the work isn’t right, our 365-Day Done Right Promise means we make it right, no argument needed.
FAQs
Replacement work performed by an independent provider can affect a manufacturer’s warranty, and we can’t speak for CWS on that. What we can do is document everything we touch and hand you the records; we walk you through this before any work starts so there are no surprises. Call us at (866) 616-0837 and we’ll explain what your options are.
In many cases you can repair rather than replace. CWS hardware, rollers, sweeps, and IGUs are often available through aftermarket suppliers, and we’ll price both an OEM and an aftermarket option when that’s possible. Some older CWS series have parts that are no longer stocked, and that’s when we’ll tell you replacement is the better call. Call (866) 616-0837 for a free estimate.
If the frame and sash are sound and only the glass is fogged, a replacement IGU is usually the cheaper route. If the frame is distorted or the seal failed at the sash, full replacement is the honest answer. We check both on-site and put the reasons in writing. Estimates are free; call (866) 616-0837.
Most jobs are completed in one to two days once the product is in hand; a single-window repair is often done in a couple of hours. Special-order glass and full-frame units need lead time, which we’ll give you in writing with the quote. Call (866) 616-0837 to schedule your free estimate.
No. The written price we give you before work begins is the price, and any change requires your approval first. That’s our no-hassle upfront pricing policy, on every job. Call (866) 616-0837 to get a written price for your CWS windows.
If your CWS windows are fogged, dragging, or drafty, the next step is a free estimate. Call Hale Windows & Doors Enterprise at (866) 616-0837, and we’ll send a background-checked, photo-badged technician to your door, put the price in writing, and back the work with our 365-Day Done Right Promise.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.