A Hale company - serving Enterprise, NV
C

CWS Sliding & Patio Doors in Enterprise, NV

New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.

1

Choose your installer

The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.

Talk to a real person →

2

Select the right products

Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.

Compare the lines →

3

Prepare your home for install

Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.

Get the install checklist →

Compare the Lines We Quote

Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.

PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
  • More impact certifications than any other line we quote
  • WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
  • 99% on-time delivery keeps your install date on the calendar
See it quoted on your openings →
CGIThe heavyweight impact line$$$$$
  • Large-missile impact ratings for the strictest wind zones
  • Architectural-grade aluminum with commercial-depth frames
  • The line we quote when protection is the whole point
See it quoted on your openings →
CWSThe value pick$$
  • Vinyl systems built to strict wind codes
  • Strong energy packages at the friendliest price point
  • The smart start for whole-home replacements on a budget
See it quoted on your openings →
ESWSlim lines, big glass$$$$
  • Narrow-sightline aluminum for modern elevations
  • Oversized openings and floor-to-ceiling glass
  • Impact-rated without the bunker look
See it quoted on your openings →
ECOThe aluminum impact workhorse$$$
  • Factory-built aluminum impact systems
  • A strong price-to-protection ratio for coastal homes
  • Proven lines with short lead times
See it quoted on your openings →

CWS Sliding & Patio Doors: The Enterprise Owner’s Guide

We install and service CWS sliding and patio doors throughout Enterprise, and most full door replacements land between $1,850 and $4,200 installed, depending on size, glass package, and frame configuration. Smaller fixes, like a roller or latch swap, usually run $140 to $360. Hale Windows & Doors Enterprise is an independent service provider and is not affiliated with CWS; we work with the brand because the doors hold up in Southern Nevada and because parts are still sourceable.

Modern home exterior with floor-to-ceiling windows and sliding glass door in Enterprise, NV

Call (866) 616-0837

Owners rarely notice a sliding door failing all at once. It starts with a drag near the end of the track, a thumbturn that needs a second try, or a whistle along the jamb on a windy March afternoon off the desert. By the time the door is jumping its track or the glass is fogged between panes, the part that failed has usually been going for a year or more.

Which CWS Models This Applies To

CWS has built sliding and patio doors in a range of series over the decades, and the part that fits a 1990s unit rarely fits a mid-2000s one. Series numbers, glass stamps, and manufacturer labels are usually etched on the glass corner or printed on a sticker inside the head jamb or on the outer face of the operating panel. If the label is gone, we identify the door by panel thickness, roller style, and track profile, and we measure the opening, not the panel, because panel dimensions vary even within a single series.

The OEM-versus-aftermarket call matters here. CWS-specific rollers, latches, and weatherstrip are still available for most models in production and many recent legacy ones, but older series can require a compatible substitute. We choose OEM when it matches the unit and a quality aftermarket equivalent when OEM is out of production or priced out of proportion to the job, and we tell you which we’re using before the work starts. Homeowners in Enterprise often learn the hard way that a generic roller from a hardware aisle will fit the track but won’t carry the panel weight, and it fails within a season.

Signs Your CWS Sliding & Patio Doors Is Failing

Here’s what we see most often when we’re called out on a CWS sliding door in Enterprise:

  • The panel drags or jumps the track. Usually a flattened or seized roller, or a roller that’s worn through the nylon tire. Once the tire is gone, the steel hub grinds the aluminum track and the damage gets more expensive.
  • The door is hard to lock or won’t latch. A misaligned keeper, a sagging panel, or a worn mortise latch. If it takes two hands and a hip check, the alignment is off and the latch is taking the strain.
  • Fogging or condensation between the glass panes. A failed insulated glass unit seal. Once the desiccant is saturated, no amount of wiping helps; the glass unit needs replacing.
  • Wind or dust coming through the jamb. Worn weatherstrip, a bent sweep, or a frame that’s shifted in the rough opening. Common on south- and west-facing doors where UV exposure is heaviest.
  • The screen is torn, off-track, or the frame is bent. Screen frames warp in the heat, and rollers on the screen panel wear out faster than the door panel’s because they carry less load and get overlooked.

Replacement Cost & What’s Included

Installed pricing for CWS sliding and patio doors in Enterprise runs roughly $1,850 to $4,200 for a full replacement, and $140 to $360 for a targeted repair like a roller set, latch, or weatherstrip. The main price drivers are door size, glass package (standard clear versus low-E glass, a thin coating that blocks heat while letting light through), frame material, and whether the rough opening needs work. Track damage adds cost because the frame often has to come out.

Every quote is a written, line-item price before anyone picks up a tool, so you see parts and labor separately. Every repair carries a written guarantee, and if the repair fails, the second visit is free. All work is backed by the 365-Day Done Right Promise: if it isn’t right, we make it right.

DIY or Call Us?

You can safely check the obvious things: clean the track with a vacuum and a stiff brush, look for debris or a bent track edge, test whether the drag is in the panel or the track, and confirm the door is plumb with a level. Adjusting a roller height with a screwdriver is within reach for most homeowners. What goes wrong is deeper: bent or corroded tracks that need replacing, out-of-square frames that require the panel to be rehung, and glass unit swaps, where a dropped panel can shatter tempered glass or injure a hand. Sliding door panels are heavier than they look, and a panel that comes off the track unexpectedly can trap fingers or fall.

If the drag, latch problem, or fogging has been there for more than a few weeks, call us. Technicians arrive background-checked, identity-verified, photo-badged, and pre-announced by name and photo, so you know exactly who’s at the door. Call (866) 616-0837 and we’ll get a written price to you before the visit.

FAQs

How long does a CWS sliding door last in Enterprise? Fifteen to twenty-five years is typical for the frame, but rollers, weatherstrip, and glass seals fail sooner, often inside ten to fifteen years in Southern Nevada’s heat and dust. Regular track cleaning stretches roller life noticeably.

Can the door be repaired instead of replaced? Yes, in most cases. Rollers, latches, weatherstrip, sweeps, and screen panels are all serviceable, and a fogged glass unit can usually be swapped without replacing the frame. We tell you plainly when a repair makes sense and when it doesn’t. Call (866) 616-0837 for a free estimate.

How long does a roller or latch swap take? Most single-part repairs are done in one visit, usually an hour to two hours on site, assuming the part is identified and sourced. Full door replacements are a separate schedule and we’ll lay that out in writing.

How do you source the part? We identify the CWS series from the label or by measurement, then order either the OEM part or a quality aftermarket equivalent matched to your door’s track and panel weight. We also work with PGT, CGI, and ES Windows parts, so if the door turns out to be a different brand than expected, we can still help.

If your CWS sliding door is dragging, whistling, or won’t lock, the fix is usually smaller than you fear and the price is in writing before we start. Call Hale Windows & Doors Enterprise at (866) 616-0837 for a free estimate on your sliding or patio door in Enterprise.

Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.

Why Impact

Six Reasons Homeowners Choose Hale Windows & Doors Enterprise

Storm Protection

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.

Energy Savings

Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.

Noise Reduction

Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.

Burglar Resistant

Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.

Year-Round Comfort

Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.

Property Value

A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.

Other Services

Other Hale Windows & Doors Enterprise Services

Reviews

What Neighbors Say About Hale Windows & Doors Enterprise

★★★★★

"Fogged double pane in the living room. They replaced the glass units only, not the whole frame, and saved me a lot."

RRaul C.
★★★★★

"Vetted installers make me feel better having them inside. They were respectful and cleaned up all the old caulk and debris."

HHank V.
★★★★★

"Replaced eight old aluminum windows. The crew showed ID, wore shoe covers, and finished the whole job in two days. House is quieter and warmer."

BBarbara N.
★★★★★

"Energy bills dropped noticeably after the replacement. Install was neat and trimmed properly."

GGabriela L.
Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (866) 616-0837
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Hale Windows & Doors Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch