New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Window Replacement in Enterprise: What to Know First
We provide independent CGI window replacement in Enterprise, and a typical full-frame swap on a single CGI unit takes one to two days from tear-out to final seal. Most full-frame replacements here run $850 to $2,400 per window installed, and you get that number in writing before anyone touches your home. We’re an independent CGI service provider, not affiliated with or authorized by the manufacturer.

This page is for Enterprise homeowners whose CGI windows have fogged glass, sticking sashes, or failing seals and who want straight answers on repair versus replacement. Our technicians have up to 17 years of experience, and they know CGI’s product lines closely enough to tell you which failures are worth fixing and which mean it’s time for new glass. Call (866) 616-0837 to schedule a free estimate.
How CGI Products Fail – and How We Fix Them
CGI builds several residential lines that show up in Enterprise homes, and each one fails in its own way. Knowing the specific symptom saves you from paying for the wrong fix.
- Seal failure and fogging in CGI double-pane units. When the perimeter seal on a CGI insulated glass unit breaks, moisture gets between the panes and you see a cloudy haze or water streaks that won’t wipe away. In Enterprise’s dry summer heat and big day-to-night temperature swings, that seal stress happens faster than owners expect. We replace the glass unit itself when the frame is sound, which costs far less than a whole new window.
- Vinyl frame bowing on sun-exposed elevations. CGI’s vinyl replacement windows hold up well on shaded walls, but a west- or south-facing wall in Enterprise can cook a frame until the sash drags or the corners separate. We check for frame deflection before quoting, because a bowed frame means replacement rather than a glass swap.
- Failed balances and sticking sashes on single-hung and slider units. A CGI sash that won’t stay up or grinds in the track usually points to a worn balance or a misaligned roller, not a dead window. On slider lines, grit in the track from desert dust is a common culprit. We identify the actual part and replace it rather than selling you a whole unit you don’t need.
- Condensation and air leaks at the perimeter. If you feel a draft around the frame rather than through the glass, the seal between window and rough opening has failed. This is common where original installers used inadequate flashing on stucco walls. We re-flash and seal properly during replacement so the leak doesn’t come back.
- Hardware and screen track corrosion. CGI’s screens and locks are fine for years, but dust and heat wear the moving parts. We replace worn hardware with quality aftermarket components when the originals are discontinued, keeping your windows working without a full replacement.
Our CGI Window Replacement Process
Every CGI job follows the same six steps, whether it’s one window or a whole house in Enterprise.
- 1
Diagnostics. We inspect each unit, test the glass seal, check frame square and level, and confirm whether the failure is glass, frame, or installation. You get a clear explanation of what’s actually wrong.
- 2
Parts decision. We weigh OEM CGI parts against quality aftermarket equivalents, factoring in availability and warranty impact. You hear the trade-off plainly before we commit.
- 3
The written price. Before any work starts, the full price is in your hands, line by line. No change orders, no surprises on the invoice.
- 4
The installation or repair. We remove the old unit, prep and flash the opening, set the new window, and seal it against Enterprise’s dust and heat.
- 5
The test. We open, close, lock, and check every unit for smooth operation and a clean seal, then walk you through the results.
- 6
The guarantee and cleanup. Every repair carries a written guarantee, and if a repair fails we come back for a free second visit. We haul away old glass and leave the room as we found it.
What CGI Window Replacement Costs in Enterprise
Prices below reflect what Enterprise homeowners typically pay. Your exact number depends on window size, frame condition, and how many units you’re replacing.
| Scenario | Typical Range |
|---|---|
| Glass unit replacement (seal failure, frame sound) | $180 – $450 |
| Insert window replacement (new sash into existing frame) | $550 – $1,100 per window |
| Full frame replacement (tear-out to new frame) | $850 – $2,400 per window |
| Energy-efficient glass upgrade (low-E coating, argon fill) | $150 – $400 added per window |
| Hardware and balance repair | $95 – $250 |
What moves the price: window count, whether the frame is salvageable, stucco repair after tear-out, and glass options. Low-E glass (a thin coating that blocks heat while letting light through) is worth the upgrade on Enterprise’s sun-facing walls. Call (866) 616-0837 for an exact quote. Estimates are free, and the written price you get is the price you pay.
Why Enterprise Homeowners Call Hale Windows & Doors Enterprise for CGI Work
We’re independently owned and operated, part of the Threshold Group, and we’ve built our name on telling you exactly who is coming to your door. Every technician is background-checked, identity-verified, uniformed, and photo-badged, then pre-announced by name and photo before the visit, so you know who’s at your door before you open it.
Our 365-Day Done Right Promise backs every job: if the work isn’t right, we make it right. A live person answers every call, day or night. Our techs specialize in CGI window replacement in Enterprise, and when a job calls for it we also install and service PGT, CWS, ES Windows, and ECO Window Systems. Call (866) 616-0837 for a free estimate.
FAQs
It can, when the work is done improperly or with mismatched parts. We follow warranty-safe practices and tell you plainly which steps protect your coverage. As an independent CGI service provider, we’re not affiliated with the manufacturer, so we speak to the warranty terms rather than claim authorization.
Both are options. We source OEM CGI parts when available and use quality aftermarket equivalents when they hold up as well or better, and we explain the trade-off before you decide. Call (866) 616-0837 to talk through your specific window.
Repair usually makes sense when the frame is sound and only the glass or hardware has failed. If the frame is bowed, out of square, or leaking at the perimeter, replacement is the better value. We diagnose the real cause before recommending either path.
A single full-frame replacement is typically a one- to two-day job, and glass-only swaps are often faster once parts are in hand. We give you a real timeline with the written quote, not a guess on the phone. Call (866) 616-0837 to schedule.
Full-frame replacement runs $850 to $2,400 per window installed, while glass-unit replacement starts around $180. Your exact figure depends on size, frame condition, and glass options. Call (866) 616-0837 for a free estimate with a written price.
Schedule Your Free Estimate
If your CGI windows are fogging, sticking, or leaking, the fastest way to know your options is a free estimate. Call Hale Windows & Doors Enterprise at (866) 616-0837, tell us what you’re seeing, and we’ll tell you exactly who’s coming, what it will cost in writing, and how the 365-Day Done Right Promise covers the work. A live person answers every call.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.