New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Impact Garage Doors: The Enterprise Owner’s Guide
We install and service CGI-compatible impact garage doors in Enterprise, and a full installed replacement typically runs $2,400 to $5,800 depending on door size, wind-load rating, and opener compatibility. Most Enterprise owners discover the problem the same way: a door that starts reversing halfway down, a panel that flexes visibly when the wind picks up off the desert, or a section that never fully seals after a summer of 110-degree heat cycles. This page covers what fits your specific CGI model, what fails first in Enterprise conditions, and what a fair installed price looks like before you call anyone.

Which CGI Models This Applies To
CGI makes impact-rated garage doors across several series, and the part that matters most for fit is the panel and track profile, not the model name on your opener. If you’re unsure which series you have, look for the compliance label on the inside of the door panel (usually upper left), the embossed marking on the bottom section, or a manufacturer sticker on the vertical track. Impact doors in Enterprise also carry a wind-load rating stamped on that label, and replacement sections must match it or the door loses its rating.
On the OEM-versus-aftermarket decision for CGI specifically: genuine CGI sections carry the exact profile and finish match, but aftermarket impact-rated equivalents from established manufacturers fit many older CGI models at 15 to 30 percent less. We quote both options in writing so you can compare. One compatibility gotcha worth knowing: CGI changed panel interlock geometry on some series around 2018, so a door built before that year may not accept current production sections without adapter hardware. This is why we measure your existing door before ordering anything. Hale Windows & Doors Enterprise is an independent service provider and isn’t affiliated with CGI.
Signs Your CGI Impact Garage Doors Is Failing
Impact doors fail differently in Enterprise than they do in coastal markets. Local UV load and summer heat cycling stress the finishes and seals faster, and the desert dust that blows through the valley works into tracks and rollers. Here’s what to watch for:
- Door reverses before reaching the floor. Usually a misaligned safety sensor or a track that’s shifted, not the door panel itself. Both are fixable without full replacement if caught early.
- Visible flex or bow in a panel during wind. The impact reinforcement has failed or the section is delaminating. This one doesn’t get better on its own, and it compromises the wind rating.
- Bottom seal torn or hardened. Enterprise heat bakes rubber seals hard within a few summers. A hard seal lets dust and heat in and stops sealing against wind-driven rain.
- Rollers grinding or screeching. Desert grit packs into bearings and track edges. Left alone, the friction wears the track and strains the opener.
- Panel finish fading, chalking, or peeling. UV exposure at Enterprise’s altitude breaks down exterior coatings. Cosmetic at first, but once the substrate shows, moisture intrusion starts.
Replacement Cost & What’s Included
Installed pricing in Enterprise runs $2,400 to $5,800 for a full CGI-compatible impact door, and $600 to $1,400 for a single section replacement when the rest of the door is sound. What drives the range: door width and height, whether your door is single or double, the wind-load rating required, window inserts, and whether the opener needs re-mounting to match the new door’s weight and balance.
Every quote we give is written and itemized before any work begins. Parts, labor, haul-away of the old door, and disposal are broken out line by line so there’s no invoice surprise. Every repair carries a written guarantee, and if the repair fails, a second visit is free. The whole job sits under our 365-Day Done Right Promise: if it’s not right, we make it right.
DIY or Call Us?
Some checks are safe for any homeowner. You can visually inspect the bottom seal, clear dust and grit from the tracks with a broom, test the safety sensors by waving an object in front of them, and listen for grinding or rubbing as the door cycles. What you shouldn’t do yourself: replace a torsion spring, adjust the counterbalance, or try to re-hang a panel. Garage door springs and cables are under extreme tension and cause serious injuries every year. A trained technician with the right tooling should handle anything involving the springs, cables, or panel re-hanging.
If you’re seeing flex in a panel or the door won’t balance, shut it and leave it. Call us at (866) 616-0837 for a free written estimate. Our technicians have up to 17 years of experience, and every one of them is background-checked, identity-verified, and photo-badged before they arrive. You’ll get their name and photo before the visit.
FAQs
A well-maintained CGI impact door lasts 20 to 30 years in Enterprise conditions, though the bottom seal and rollers typically need replacing every 4 to 6 years because of heat and dust. Panel finish longevity depends on UV exposure and whether the door faces full afternoon sun. Call (866) 616-0837 for a free assessment.
Yes, in many cases. A single damaged section, worn rollers, a failed seal, or a misaligned track can usually be repaired without replacing the whole door, often for $600 to $1,400 for a section and less for hardware. Structural flex across multiple panels or a compromised wind rating usually means full replacement. We’ll tell you honestly which one you need.
A full garage door replacement takes 4 to 6 hours for a standard two-car door, and a single section replacement takes 1 to 3 hours. We schedule installations in advance rather than same-day because the door has to be measured and ordered to fit your opening exactly.
We order genuine CGI sections directly when they’re available, and we source quality aftermarket impact-rated equivalents when they aren’t or when the price difference is meaningful. Either way, we measure your existing door first and quote the exact part number in writing before ordering. You’ll know what’s coming before it’s ordered.
Ready to price your CGI impact garage door replacement in Enterprise? Call (866) 616-0837 for a free written estimate. We answer live, 24 hours a day, 7 days a week. We also service PGT, CWS, and ES Windows products. Our written price is in your hands before any work starts, and every job is covered by our 365-Day Done Right Promise.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.