New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Front Door Replacement in Enterprise: What to Know First
CGI front door replacement in Enterprise typically runs $1,450 to $3,900 installed, depending on the series, the door slab, and whether we’re matching an existing frame or rebuilding the opening. Most jobs are measured, quoted in writing, and finished in a single day once the door arrives. We’re an independent CGI service provider, not affiliated with or authorized by the manufacturer, and we tell you the honest price before anyone touches your door.

This page is for Enterprise homeowners who already have a CGI door or entry system and need it replaced without guesswork about parts, fit, or warranty. Call (866) 616-0837 for a free written estimate.
How CGI Products Fail – and How We Fix Them
CGI builds doors and windows for desert and coastal markets, and the assemblies that show up in Enterprise homes carry a few predictable failure patterns. Here’s what we actually see on CGI jobs, and what we do about it.
- Frame-to-slab sag on heavier entry doors. Multi-point and three-point lock CGI entries carry more weight than a standard knob-latch door, and over a few summers the hinge jamb can drop a few millimeters. Owners report the deadbolt dragging or the door needing a shoulder to close. We reset the jamb plumb and check hinge-side anchors before replacing anything – sometimes the “failing door” is a failing frame.
- Weathered sill and threshold seals. Enterprise’s low humidity and intense UV dry out the weatherstripping and sill gaskets faster than in temperate climates. You’ll feel grit under the door and see daylight at the threshold. We replace the seal kit and adjust the threshold – and if the sill pan is compromised, that’s when replacement makes sense.
- Glass unit seal failure (IGU fogging). CGI doors with insulated glass can develop fogging or a hazy film between panes when the edge seal fails. That’s not a door-wide problem – often only the glass unit needs swapping, and we quote that separately so you can compare it to a full door replacement.
- Faded or chalked finishes on painted and anodized slabs. Desert sun bleaches darker finishes on south- and west-facing entries within a few years. If the substrate is sound, refinishing is an option; if the skin has delaminated or the slab has warped, replacement is the durable answer.
- Lock and hardware wear on high-cycle doors. CGI multi-point hardware takes a beating on doors used dozens of times a day – family entries, garages-adjacent side doors. Handles go loose, the gearbox wears, and the door stops latching clean. We evaluate whether OEM hardware gets you another decade or whether a quality aftermarket set is the smarter spend, and we tell you which and why.
Our CGI Front Door Replacement Process
- 1
Call and schedule. A live person answers, 24/7. We book a visit and send you the technician’s name and photo before the appointment through our Threshold Standard – background-checked, identity-verified, photo-badged, pre-announced.
- 2
On-site diagnostics. We inspect the frame, sill, hinges, lock hardware, and glass separately. You get a plain explanation of what’s actually failing, not a blanket “you need a new door.”
- 3
Written price in your hands. Before any work begins, you receive a written, itemized price – door, frame prep, hardware, disposal, permit if required. No change orders after the fact.
- 4
Parts decision. Where OEM components fit and are available, we use them. Where a quality aftermarket part performs better or matches faster, we explain the trade-off and let you choose.
- 5
Installation and testing. We set the door, check plumb and square, operate the lock and multi-point hardware through full cycles, verify the seal against daylight and airflow, and clean up.
- 6
The 365-Day Done Right Promise. If anything isn’t right within a year, we make it right – no argument. Every repair also carries a written guarantee, with a free second visit if the repair fails.
What CGI Front Door Replacement Costs in Enterprise
CGI entry door replacement in Enterprise usually lands in these ranges. These are installed prices, not hardware-only figures.
| Scenario | Typical Range |
|---|---|
| Glass unit (IGU) replacement only | $280 – $650 |
| Hardware and lock rebuild, existing slab | $180 – $480 |
| Standard CGI entry door, like-for-like swap | $1,450 – $2,400 |
| Premium CGI entry with multi-point lock and decorative glass | $2,600 – $3,900 |
| Frame rebuild or sill pan replacement | Add $400 – $900 |
What moves the price: door size and series, glass package (low-E, decorative, impact), hardware grade, and whether the rough opening needs work. Enterprise homes with older stucco or block surrounds sometimes need extra prep – we tell you upfront if that’s likely.
Call (866) 616-0837 for a free estimate with a written, itemized price.
Why Enterprise Homeowners Call Hale Windows & Doors Enterprise for CGI Work
We quote in writing before work begins – every job, every time. The 365-Day Done Right Promise is stamped on the job and documented, not verbal. Every repair carries a written guarantee with a free second visit if it fails.
Our technicians have up to 17 years of experience across CGI and the other lines we install and service – PGT, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That matters on a CGI job: when one brand’s part is on backorder or the right fit calls for a different assembly, we’re not stuck. We match the product to your door, not the other way around.
Live phone support answers 24/7 – no voicemail, no callback queue. And every technician is sent to you by name and photo before the visit, through the Threshold Standard.
FAQs
It depends on the door’s age and what failed. CGI’s manufacturer warranty typically covers glass seal failure and structural defects for a set period, but wear items like weatherstripping and hardware usually fall outside it. We’ll review the coverage with you and, where a warranty claim makes sense, use OEM components so the claim stays intact. Call (866) 616-0837 and we’ll walk through it.
In most cases, yes – OEM CGI hardware and glass units are available, though lead times vary by series. When OEM parts are delayed and a quality aftermarket equivalent does the job, we tell you the trade-off and let you decide. As an independent CGI service provider, we’re not tied to one supply channel.
Repair if the frame and slab are sound and the issue is hardware, seals, or a single glass unit – that often costs $180 to $650. Replace if the slab has warped, delaminated, or the frame has moved and can’t be reset. We check both before recommending anything, and the written quote shows the difference.
Most standard replacement jobs are completed in a single day once the door is on site. Custom sizes, decorative glass, and frame rebuilds can take longer – we give you the real timeline in the written estimate, not a vague “a few days.”
Some replacements require a permit, especially when the opening size changes or the door is an egress door. We tell you upfront whether a permit applies and handle the paperwork. Call (866) 616-0837 for a free estimate and a straight answer on what your job needs.
Ready for a written price and a CGI door that closes right? Call Hale Windows & Doors Enterprise at (866) 616-0837 – free estimates, live answer 24/7, and every job backed by the 365-Day Done Right Promise.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.