New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Door Installation: The Enterprise Owner’s Guide
CGI door installation in Enterprise typically runs $650 to $2,400 installed, depending on the door line, material, and whether the frame or hardware needs replacing alongside the door. Most CGI door projects we quote in Enterprise are scheduled within a few business days, never promised same-day, because proper installs need correct parts on hand and enough time to do the job right. Every job starts with a written price in your hands before any work begins, backed by our 365-Day Done Right Promise.

The symptom picture is usually quieter than homeowners expect. A CGI door that’s failing rarely announces itself. Enterprise owners notice it as a faint whine when the door sweeps through its arc, a slight binding near the latch side, or a gap at the sill that lets in dust from the desert floor. In our Nevada climate, the swing between 20-degree winter nights and 100-plus summer afternoons of direct sun punishes the gaskets, rollers, and bottom seals on even well-built doors, and CGI units are no exception.
Key Takeaways
- Installed CGI door replacement in Enterprise: $650-$2,400, written price before work starts.
- CGI doors in Enterprise fail most often at seals, weatherstripping, and lower hinges from sun and dust, not from the panel itself.
- We source genuine CGI-compatible parts for your specific model; we don’t carry parts on a truck or stock them locally.
- Every install carries the 365-Day Done Right Promise: if something’s not right, we make it right.
Which CGI Models This Applies To
CGI manufactures a wide range of residential doors across several series, including aluminum single-hung patio doors, sliding glass doors, and entry systems that share hardware families with their window lines. Because Enterprise sits in a high-heat, low-humidity zone, the specific CGI model on your home matters more than most homeowners realize. A door sized for a coastal install may have thinner thermal breaks than what performs well here. Before we quote anything, we measure rough opening, check the model label (usually a sticker on the top or side of the door panel or frame jamb), and verify the hinge and roller spec against what CGI designed for that unit.
The OEM-versus-aftermarket call comes down to fit and finish. For hinges, rollers, and locking hardware, we source OEM-grade or proven aftermarket equivalents that match CGI’s mounting patterns exactly; a generic 1-3/4 in. roller that looks close but sits 1/16 in. off will make a door drag within months. We also work with PGT, CWS, ES Windows, and the other window and door lines we carry, so we can match a door brand to your home’s architecture rather than force a fit.
Hale Windows & Doors Enterprise is an independently owned service provider, not affiliated with or authorized by CGI. We install and service CGI products the way an experienced specialist would: by matching the right part to your exact model.
Signs Your CGI Door Installation Is Failing
- Dragging or binding near the bottom hinge. The lower hinge or pivot is worn or slightly out of alignment. Left alone, it grinds the door edge and eventually tears at the frame.
- Daylight or dust visible at the sill or threshold. The bottom seal or weatherstripping has compressed past its useful life. In Enterprise, this starts as a thin line of desert dust on the floor near the door and grows.
- A whistling or whine when the door opens or closes. The rollers or glides are dry or worn. The sound is the door telling you the hardware is scraping instead of rolling.
- Sticking that comes and goes with the weather. Thermal expansion is normal, but a CGI door that sticks only in July and swings free in January is showing you a failing weatherstrip seal or a slightly racked frame.
- The lock doesn’t line up without a push or lift. The door has sagged or the strike plate has shifted. This one gets worse fast and can damage the lock, the frame, or both if the door slams against a misaligned keeper.
Replacement Cost & What’s Included
Your written quote will break down every line: the door panel or part, labor, any trim or frame work, and hardware. No surprises appear after the first invoice. Here’s how costs land in Enterprise:
- Door panel replacement only (same frame, same opening): $650-$1,100
- Door plus hardware (hinges, rollers, locks, weatherstripping): $900-$1,600
- Door replacement with frame or sill repair: $1,400-$2,400
- Diagnostic visit + written estimate: free
What drives the range up: a non-standard rough opening, an older CGI model where parts require sourcing, or a frame that’s pulled away from the wall and needs reset. What pulls it down: a straight swap on a standard opening with hardware in good shape. Every repair carries a written guarantee, and if a repair fails, our second visit is free. That’s on top of the 365-Day Done Right Promise stamped on every job.

DIY or Call Us?
If all you need is to test whether the door is out of alignment, you can safely check a few things yourself. Open and close the door slowly and listen for scraping. Look for a consistent gap at the top or sides. Try the lock without forcing it. Note whether sticking changes with the time of day. That kind of observation helps when you call us and can save a diagnostic step.
The line is here: CGI doors aren’t dangerous the way garage parts or wiring are, but they do have genuinely heavy panels, tensioned rollers, and sharp glazing edges. Lifting a door out of its track wrong can crack the glass or wrench the frame; adjusting a hinge without the right shims can rack the panel and void any remaining product coverage. For Enterprise homeowners, especially older owners or families managing this on a weekend, the smarter move is calling (866) 616-0837. A live person answers every call, 24 hours a day, 7 days a week. We’ll send a Threshold Verified technician who is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit, so you know exactly who is at the door.
FAQs
CGI residential doors typically last 15 to 25 years in a climate like Enterprise, but hardware (rollers, hinges, seals) tends to fail at the 8-to-12 year mark. The desert sun and dust here speed up gasket wear well before the panel itself gives out. Call (866) 616-0837 for an exact quote – estimates are free.
Often, yes. If the panel, glass, and frame are sound, we can replace the rollers, hinges, weatherstripping, or threshold and get the door working properly for far less than a full replacement. The diagnostic visit confirms which path makes sense before you commit. Call (866) 616-0837 to schedule your free estimate.
Most CGI door replacements we handle in Enterprise run half a day to a full day, depending on whether the frame is being replaced too. We schedule the work, not promise it same-day, because doing a door right requires proper parts and proper time. Call (866) 616-0837 for a written price and scheduling.
We identify your door by its model label and serial information, then source genuine CGI-compatible parts or proven aftermarket equivalents that match the mounting pattern exactly. We don’t carry parts on a truck or stock them locally; we order to your model. Call (866) 616-0837 to get the process started – estimates are free.
Schedule Your CGI Door Service in Enterprise
Call (866) 616-0837 to schedule your free estimate. A live person answers every call, and you’ll have a written price in hand before any work starts. Every install is backed by the 365-Day Done Right Promise, and every repair carries its own written guarantee. Hale Windows & Doors Enterprise installs and services eight professional-grade lines including CGI, PGT, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, so we can match the door to your home in Enterprise rather than push a single brand. We’re independently owned and operated, part of the Threshold Group family, and we’ll show you exactly who’s coming before you open the door.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.