New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Garden Windows in Enterprise, NV
Garden windows are the small glass bump-outs that project out from a kitchen or bathroom wall, giving you a shelf for plants plus daylight and ventilation without taking up floor space. In Enterprise, they’re a natural fit for the single-story homes and upstairs kitchen walls built around the southwest valley, where afternoon sun is strong and a little extra glass can change how a room feels. We install garden windows across Enterprise with a written price before work begins, backed by our 365-Day Done Right Promise. Call (866) 616-0837 and a live person answers, day or night.
What sets our garden window work apart here is who shows up. Every technician arrives under the Threshold Standard: background-checked, identity-verified, photo-badged, and announced by name and photo before the visit, so you know exactly who is at your door. The technicians we work with have up to 17 years of experience, and we match the right glazing and frame to your wall rather than pushing a single product.
When You Need Garden Windows
Most homeowners don’t call about a “garden window” by name. They call because something in the kitchen feels wrong. Here are the situations we see most in Enterprise.
- Your kitchen is dark and a standard window can’t fix it. If your only exterior wall faces a block wall or a neighbor’s roofline, a flat window gives you a view of stucco. A garden window projects out 10 to 18 inches and pulls daylight from three directions, so a galley kitchen reads brighter without an electrical change.
- You’ve been growing herbs on a sill and they keep scorching. Enterprise gets punishing summer sun, and a south- or west-facing kitchen sill is where tender plants fail first. We set up garden windows with selective glazing and a vent panel so you can raise a growing shelf without the glass acting like a solar oven.
- Your existing bump-out window leaks at the frame corners. In neighborhoods around Desert Inn and the older stretches near Eastern Avenue, we regularly see garden windows from the 1990s and 2000s fail at the corner seams after a monsoon season. Water tracking behind the sill shows up as stained drywall below the opening, not always as a visible drip.
- You want natural light but privacy from the street. Garden windows sit above counter height, so even a street-facing wall gets daylight without giving passersby a clear view into the kitchen.
- You’re replacing a failing window and want more function. A straight replacement keeps the same limited function. Stepping up to a bump-out adds a real plant shelf and cross ventilation.
- Your HOA requires a specific glass or frame color. Enterprise’s master-planned neighborhoods and gated communities often specify visible exterior frame color. We confirm the requirement before the order is placed.
Our Garden Windows Process
A garden window is a structural change, not a straight swap, so the sequence matters more than it does for a flat replacement. Here’s how we handle it in Enterprise.
- On-site measure and wall check. We measure the rough opening, confirm wall construction and header condition, and look at how the existing frame was flashed. If the header can’t carry the projection safely, we tell you before anyone orders product.
- Written price before anything starts. You get a line-item written price covering removal, framing, flashing, the window itself, and finish. No surprise invoice later.
- Product selection from professional lines. We work from eight window and door product lines, including ES Windows and ECO Window Systems, and match frame material and glazing to your wall and sun exposure. For kitchen applications we’ll often spec a vent panel and low-E glass (a thin coating that blocks heat while letting light through).
- Technician announced before arrival. The Threshold Standard means the tech is background-checked, identity-verified, and photo-badged, and you get their name and photo before they come to the door.
- Framing, flashing, and set. The opening is reframed and flashed, the unit is set and shimmed, and the interior and exterior are finished and sealed.
- Walkthrough and guarantee. We show you the finished window, confirm drainage and operation, and hand over the written guarantee. Every job carries the 365-Day Done Right Promise: if it isn’t right, we make it right.
Garden Windows Pricing in Enterprise
Garden window projects in Enterprise generally run $1,800 to $4,200 installed, depending on the size of the opening and what’s behind the wall. A standard bump-out over a kitchen sink sits at the low end of that. Oversized units, second-story walls, and stucco repairs push toward the high end. Here’s the breakdown we use when quoting:
- Standard garden window unit (roughly 36″ x 48″): $700 – $1,400 for the product, depending on frame and glazing.
- Larger or custom-size unit (up to about 60″ wide): $1,200 – $2,400 for the product.
- Removal and disposal of the old window: $150 – $350.
- Framing and header reinforcement: $250 – $700 if the opening needs it.
- Flashing and stucco patch: $200 – $500, higher on two-story walls that need scaffolding.
- Interior finish and trim: $150 – $400.
- Permit cost, where required: Enterprise permits for structural openings vary; we’ll tell you at the estimate whether your job needs one.
Two things move the price most: the size of the projection and whether the wall construction can carry it without modification. Homeowners often ask whether a garden window is cheaper than a bay window. Usually it is, because a garden window is a single projecting unit rather than a three-section bay with separate side returns. For a full building-wide project it’s worth looking at the wider home scope so you can bundle a garden window with larger work.
You get a free estimate and a written price before any work starts. Call (866) 616-0837 for an exact number on your Enterprise home.
FAQs – Garden Windows
How much does a garden window cost in Enterprise, NV?
Most garden windows in Enterprise install for $1,800 to $4,200, with a standard kitchen unit at the low end and oversized or second-story units toward the top. Product selection, framing needs, and stucco repair drive most of the variation. Call (866) 616-0837 for a free written estimate on your specific wall and opening.
Do garden windows need a permit in Enterprise?
It depends on whether the job changes the structural opening. A straight replacement of an existing garden window usually doesn’t trigger a permit, while enlarging the opening or adding a new projection can. We’ll tell you at the estimate where your project falls and give you the written price including any permit cost before work begins.
Can you fix a leaking garden window, or does it need replacing?
Often it can be repaired if the leak is at the flashing or sealant line and the frame and glass are sound. If the frame corners have failed or water has reached the wall cavity, replacement is usually the better call. Our technicians assess the cause before recommending anything, and every repair carries a written guarantee, with a free second visit if the repair fails. Call (866) 616-0837 and we’ll look at it.
How is a garden window different from a bay window?
A garden window is a single projecting glass box with a shelf and a vent window, typically used over a kitchen sink. A bay window is a larger multi-section projection with side returns and usually a seat area. Garden windows cost less and take up less floor space. If you’re planning a larger window project, the Window Installation in Enterprise page covers the wider options.
Is a garden window worth it in Enterprise’s climate?
Yes, if it’s specified correctly. Enterprise’s sun and heat make glazing choice the difference between a bright kitchen and an oven. We set up garden windows with selective glazing and vent panels so the projection adds daylight without adding cooling load. Call (866) 616-0837 to talk through the right glass for your wall’s exposure.
Who will show up to install it?
You’ll know before they arrive. Under the Threshold Standard, every technician is background-checked, identity-verified, photo-badged, and sent to you by name and photo before the visit. The technicians we work with have up to 17 years of experience. Call (866) 616-0837 to book.
How long does a garden window installation take?
Most single garden window installations are completed in a day. Jobs that require reframing, permit work, or stucco patch are often two days. We’ll give you a realistic timeline at the estimate and confirm it before the work begins.
What brands do you install?
We install from eight window and door product lines, including ES Windows, ECO Window Systems, Mr-Glass, and Therma-Tru. Matching the right product to your wall and exposure matters more to us than pushing one brand. Call (866) 616-0837 and we’ll walk you through which line fits your Enterprise home.
Garden windows add real daylight and function to a kitchen or bath, but they’re a structural change that has to be measured, flashed, and finished by someone who’s done it before. Give us a call at (866) 616-0837 and a live person answers, day or night. Every job comes with a written price before work starts and the 365-Day Done Right Promise behind it. We’d be glad to put a garden window in for your Enterprise home.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.