A Hale company - serving Enterprise, NV

5 Mistakes to Avoid With Front Door Replacement

November 16, 2026 • Hale Windows & Doors Enterprise

5 Mistakes to Avoid With Front Door Replacement

5 Mistakes to Avoid With Front Door Replacement

Most front door replacements that go wrong don’t fail because of a bad door. They fail because of five decisions made before the installation ever starts: slab sizing, hinge prep, lockset bore placement, threshold height, and the written scope. Ask the right questions up front and you avoid the callback. Call (866) 616-0837 for a free estimate, or read on and take these five questions to any contractor in Enterprise.

Call (866) 616-0837

Roughly one in four front door replacements needs a callback within the first year. In almost every case we see, the problem traces back to a measurement or a spec that never made it into writing before the installer showed up.

Key Takeaways

  • The rough opening has to be checked for plumb, not just measured. Out-of-level framing shows up as a binding door the first time the season shifts.
  • Lockset bore measurements (backset, bore diameter, center-to-center) must match your existing hardware before the order is placed, or you pay for it on install day.
  • Threshold height is set by your interior flooring transition. It gets measured, never assumed.
  • “Haul-away” and “disposal fee” are separate line items. Both need to be on your written quote.
  • A one-year written warranty beats a verbal “call us if there’s a problem” every time.

Mistake #1: Ordering the Slab Before Checking the Rough Opening for Plumb

A slab ordered off a tape measure alone is a door waiting to bind. Plumb and square matter as much as width and height. Framing in Enterprise homes has usually moved a little since the original door went in – settling, seasonal soil movement, and years of sun on the west-facing walls all leave their mark. A rough opening can measure exactly right and still be out of plumb by a quarter inch, and that quarter inch is enough to make a new door drag on the strike side once summer heat and the winter cool-down cycle through.

This is the mistake we run into most often. We pulled one out of a garage over in the Sun City Aliante area last spring where the homeowner had ordered the slab herself online. The opening was a half inch out of plumb at the head. The door fit fine in March and wouldn’t latch by July. A slab that’s been sitting in a warehouse doesn’t get returned after it’s been mortised for hinges.

The question to ask: “Will you check the existing rough opening for plumb and square, and put the actual measurements in writing before the door is ordered?”

Any installer working in Enterprise should be able to tell you what they measured, not just that they measured.

Mistake #2: Not Matching the Lockset Bore Placement to Your Existing Hardware

Lockset bore placement trips up more homeowners than you’d think, and it’s a $90 upcharge waiting to happen. There are three numbers that have to match your existing hardware before the door is ordered:

  • Backset – the distance from the door edge to the center of the bore. Standard in most Enterprise homes is 2-3/8 inches or 2-3/4 inches, and they’re not interchangeable.
  • Bore diameter – typically 2-1/8 inches, but older doors and custom hardware can run different. If you’re keeping your existing handle set, the bore has to fit it.
  • Center-to-center distance – the space between the deadbolt bore and the knob bore. This varies more than people expect, especially on doors from the 1980s and 1990s that are still common across Enterprise neighborhoods.

If the new slab arrives prepped with the wrong center-to-center, the installer has to re-bore on-site. That’s a labor charge, and on fiberglass or steel doors, it’s a place where the door’s weather seal can get damaged. The fix is simple: have the installer measure your existing hardware and confirm the bore spec in writing before the order goes out. If they can’t tell you the backset number, that’s your answer.

Mistake #3: Assuming the Threshold Height Instead of Measuring the Interior Transition

Threshold height is where a front door replacement meets the rest of your house, and it’s the detail most likely to get assumed. Your new threshold has to sit at a height that lets the interior flooring transition work. Too high, and you’ve got a trip hazard or a gap under the interior trim. Too low, and water runs toward the door during a desert monsoon instead of away from it.

In Enterprise, this gets complicated by two things. First, many homes have tile right up to the interior threshold with no reducer strip, so the new threshold has to meet the tile edge exactly. Second, our flash floods push water at the door hard and fast during summer storms. A threshold set flush to the slab can wick water under the door during a heavy rain event if the exterior landing isn’t sloped right. We’ve seen water come in under a brand-new door in the Aliante and El Capitan neighborhoods because the installer set the threshold to the old door’s height without checking the exterior landing slope.

The question to ask: “What’s the threshold height you’re planning, and how does it meet my interior floor?” The answer should reference your actual floor material, not a general rule.

Mistake #4: Letting “Includes Haul-Away” and “Includes Disposal Fee” Blur Into One Line

These are two different things, and if your written quote only says one, you may be paying for the other. Haul-away means the crew takes the old door off your property. Disposal fee is the cost of getting rid of it – the dump fee, in plain terms. Some quotes include both, some include one, some include neither and add it on the invoice when the job is done.

The fix is a written quote with a line-item breakdown. Before work starts, you should be holding a piece of paper that shows:

  • Door slab and model (name the specific product – Therma-Tru, ES Windows, ECO Window Systems, or whatever you’ve chosen)
  • Hardware, hinges, and lockset prep
  • Labor and installation
  • Haul-away of the old door
  • Disposal fee
  • Permit cost if your Enterprise jurisdiction requires one
  • Total

If a contractor in Enterprise can’t hand you that list before the job, ask why. No-hassle upfront pricing means the price is in your hands before any work starts, every time, on every job. If a line item looks fuzzy on the quote, it’ll look fuzzier on the invoice.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 616-0837

What happens when you call

  1. 1
    A real person answersNo phone trees – you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Mistake #5: Accepting a Verbal “Call Us If There’s a Problem” Instead of a Written Warranty

A verbal promise protects the contractor, not you. “Call us if there’s a problem” means you’ve got nothing in hand if the door starts to drag in month eight, or the weather seal fails after a hard monsoon season. A written warranty names what’s covered, for how long, and what happens if the work fails. Anything less is a hope, not a guarantee.

Here’s what a written warranty should spell out:

  • What’s covered – labor, hardware, seal, and adjustment, or only the door product?
  • For how long – 90 days, one year, or longer?
  • What happens if it fails – a free return visit, a replacement, or a credit?
  • Who stands behind it – a named company, in writing, on the invoice.

The standard we hold ourselves to is a 365-Day Done Right Promise: if the work isn’t right, we come back and make it right, and there’s no argument about whether the callback is covered. Every repair also carries a written guarantee; if the repair fails, the second visit is free. Ask any installer in Enterprise for their warranty language in writing, and read it before you sign.

When to Call a Pro

Most of what’s covered here – measuring plumb, confirming lockset bore, setting threshold height, building a line-item quote – is work an experienced installer does as a matter of routine. Where it pays to bring in a pro is the measurement and spec stage, before anything is ordered. That’s where the mistakes happen, and that’s where a specialist saves you the callback. The Front Door Replacement in Enterprise page walks through our process and free estimate. Our technicians have up to 17 years of experience, and every job starts with a written price in your hands before any work begins.

If you’d rather not sort through product specs yourself, we work with window and door lines including Therma-Tru and Mr-Glass, and we’ll match the product to your opening rather than pushing one brand. We also handle Window Replacement in Enterprise and Window Repair in Enterprise, so a door replacement can happen alongside window work if the timing makes sense for you. You can also start at the Hale Windows & Doors Enterprise home page.

The Bottom Line

The five mistakes to avoid with front door replacement are specific and preventable: an unverified rough opening, a mismatched lockset bore, an assumed threshold height, a blurred haul-away/disposal line, and a verbal warranty. Each one is solved by the same habit – get the measurements and the scope in writing before the door is ordered.

You don’t need to know how to install a door to protect yourself from a bad one. You just need to know what to ask. If you’re in Enterprise and want help, Hale Windows & Doors Enterprise offers free estimates – call (866) 616-0837. A live person answers every call, day or night. Every technician is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit, so you know exactly who is at the door before you open it.

Frequently Asked Questions

Need Windows & Doors Help?

Call Hale Windows & Doors Enterprise - licensed & insured, here with fast after-hours help in Enterprise.

(866) 616-0837
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Hale Windows & Doors Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch