New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Therma-Tru Window Installation: The Enterprise Owner’s Guide
Therma-Tru window installation in Enterprise generally runs $475 to $1,150 per window installed, depending on size, glass package, and whether the unit is a full-frame or insert replacement. We install Therma-Tru units and compatible Therma-Tru parts, quote a written price before work starts, and stand behind every job with our 365-Day Done Right Promise. Most Enterprise homeowners land on this page after noticing a symptom they can’t ignore: a sash that drags or won’t latch, fog between the panes, or a hinge or balance that’s already failed on a door or window they thought was solid. If you’re staring at a Therma-Tru product that’s misbehaving, this guide walks through what fits, what fails, what you’ll pay, and what’s actually safe to touch yourself. Hale Windows & Doors Enterprise is an independent service provider and is not affiliated with Therma-Tru.

Which Therma-Tru Models This Applies To
Therma-Tru builds a wide range of entry doors and window systems, and the parts that fail on one line won’t match another. The most common families we see in Enterprise homes are the Smooth-Star and Fiber-Classic entry door systems, the Classic-Craft door line, and Therma-Tru’s window and patio-door products. Part compatibility depends on series, rough-opening size, and the year the unit was manufactured, not just the brand name.
To identify the right part, look for the Therma-Tru label inside the jamb or on the sash edge. It lists the series and a part number. If the label is gone, measure the rough opening and the sash dimensions carefully, and photograph any hinge, balance, or lock hardware still attached. That photo and measurement are what an installer uses to match the part.
OEM Therma-Tru parts carry the exact spec the factory designed around. Quality aftermarket equivalents can work for common items like balances, weatherstrip, and screens, and they often cost 20 to 40 percent less. For hardware with a security or structural role, such as a multi-point lock or hinge, we recommend staying with the OEM part. Whatever the job, we source the correct part before we quote, and we put the price in writing.
Signs Your Therma-Tru Window Installation Is Failing
Here’s what Enterprise homeowners usually notice first, and what’s actually causing it.
- The sash drags or won’t latch. A worn balance or a hinge that’s lost tension is usually the cause. In the dry Enterprise air, wood-frame components can shrink and let fasteners loosen over time.
- Fog or condensation between the panes. That means the sealed glass unit has failed and moisture has entered the air space. It’s a glass assembly problem, not something a wipe will fix.
- Air or water coming in around the frame. Failed weatherstrip, deteriorated sealant, or a frame that’s shifted. In Enterprise’s summer heat, sealant breaks down faster than most homeowners expect.
- A lock or handle that’s loose or won’t catch. Worn or misaligned hardware, sometimes from a shifting door or window rather than the hardware itself.
- Visible rot, cracking, or warping in the frame or sill. Moisture intrusion that’s gone past the seal. This is the one that most often turns a repair into a replacement.
Each of these has a specific cause, and the fix differs. We diagnose before we quote so the price you get is for the real problem.
Replacement Cost & What’s Included
Installed pricing for Therma-Tru window installation in Enterprise typically falls in these ranges:
| Job | Typical Installed Range |
|---|---|
| Single-hung or double-hung window, insert replacement | $475 – $750 |
| Full-frame replacement (frame, sill, trim) | $850 – $1,150 |
| Therma-Tru entry door with frame | $1,400 – $2,600 |
| Hardware, balance, or weatherstrip replacement | $145 – $325 |
| Failed sealed glass unit (IGU) replacement | $225 – $475 |
What drives the range: window size, glass package (low-E coatings, Argon fill, impact-rated glass), whether the trim and sill are reused, and how much prep the opening needs. Our written price covers the part, the labor, and cleanup. It’s in your hands before any work starts. Every repair carries a written guarantee, and if a repair fails, the second visit is free. That’s backed by our 365-Day Done Right Promise: if it’s not right, we make it right.
DIY or Call Us?
Some things you can safely check yourself. Look at the label and record the part number. Wipe the tracks and hinges clean. Note where the air is coming in and take photos. Those details help us match the part faster and quote accurately.
Where DIY goes wrong is at replacement. Window and door glass is heavy, sealed units are fragile, and a frame that’s forced or mis-set will leak and fail. Door systems add weight and tension that can pinch or release under load, so replacing hinges or a sealed glass unit without the right tools and a second set of hands is where we see injuries and re-work. If a frame is soft or a unit won’t seat correctly, stop and call. We help Enterprise homeowners sort out which Therma-Tru problems are a quick part swap and which need full replacement. Call (866) 616-0837 for a free estimate; our technicians have up to 17 years of experience, and every technician is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit through our Threshold Standard.
FAQs
A well-installed Therma-Tru unit typically lasts 20 to 30 years, but the sealed glass unit and weatherstrip often fail sooner in Enterprise’s heat and dry air, usually around 10 to 15 years. Call (866) 616-0837 for an honest assessment of what’s worth repairing versus replacing.
Yes, in many cases. A balance, hinge, lock, or weatherstrip can often be replaced without pulling the whole unit. If the frame is rot-free and the glass is intact, repair is usually the right call. We’ll tell you plainly which option you’re looking at and why. Call (866) 616-0837 to schedule your free estimate.
A single window insert replacement usually takes 2 to 4 hours, and a full-frame replacement or entry-door install can run a full day. We confirm the timeline in writing with your quote so there are no surprises. Call (866) 616-0837 to get started.
We identify your Therma-Tru series and part number from the unit label or measurements, then order the exact part to the spec, OEM or quality aftermarket as the job calls for. We don’t carry stock on a truck; we source what your unit needs. We also install and service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and ViewLux. Call (866) 616-0837 for a free estimate.
If you’re in Enterprise and dealing with a Therma-Tru window or door that’s failing, don’t wait for a small leak to become a big one. Call Hale Windows & Doors Enterprise at (866) 616-0837 for a free estimate. You’ll get a written price before any work starts, a technician you know by name and photo before they knock, and the 365-Day Done Right Promise behind the job.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.