New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Therma-Tru Window Replacement in Enterprise: What to Know First
We provide independent Therma-Tru window replacement in Enterprise with a written price in hand before any work starts. Most single-window replacements are a planned job we schedule within a week or two of your free estimate, not a same-day drop-in. Therma-Tru builds doors and door glass, so when your home’s windows need attention, we match the right window line to the opening rather than forcing a door-brand solution onto a window frame.

This page is for Enterprise homeowners who own Therma-Tru products and want straight answers on cost, parts, and whether to repair or replace. We’re an independent Therma-Tru service provider, not affiliated with or authorized by the manufacturer. Call (866) 616-0837 to book your free estimate.
How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru is best known for entry doors and door glass, but plenty of Enterprise homes pair those doors with sidelites and matching window units. Here’s what we actually see when a Therma-Tru component reaches the end of its run in the southern Nevada climate.
- Hazed door glass and sidelites (Classic-Craft and Fiber-Classic entry systems). The insulated glass unit in a Therma-Tru door sidelite fogs when the seal fails, and Enterprise’s summer heat cycling speeds that up. We replace the IGU or the full sidelite rather than living with the haze.
- Frame rot at the sill on wood-edge units. Sun-baked exteriors plus monsoon-season moisture in Enterprise work on the bottom corners first. We inspect the sill and frame, then decide between a targeted repair and a full frame replacement.
- Failed weatherstripping and door-window seals. When the seal between a Therma-Tru door and its adjacent glass gives up, you feel it as a draft or hear it as a rattle. We re-seal correctly instead of caulking over a worn gasket.
- Warped or sticking sashes from heat exposure. Southern Nevada sun on a west-facing unit can warp the sash enough to bind. Sometimes it’s adjustable hardware; sometimes the unit is done, and we tell you which.
- Broken or loose hardware on door-window combinations. Hinges, handles, and multipoint locks wear out. We replace with correct-fit parts rather than forcing an aftermarket piece to fit.
The pattern matters more than any single symptom. In Enterprise, we routinely see door-glass seal failures on south- and west-facing sides years before the same unit on the shaded north side shows a problem. That’s a climate reality you won’t find on Therma-Tru’s own site, and it’s why our diagnostic visit checks orientation before we quote.
Our Therma-Tru Window Replacement Process
Every Therma-Tru job follows the same path, and you know the price before anyone picks up a tool.
- 1
Free estimate and diagnostics. We measure the opening, check the glass seal, inspect the frame and sill, and note orientation. You get a written, line-item price.
- 2
Parts decision. Where a Therma-Tru OEM part is still available and the best fit, we use it. Where it isn’t, we explain the OEM-versus-quality-aftermarket trade-off in plain terms so you choose, not us.
- 3
Warranty-safe removal. We take out the old unit without damaging the surrounding frame, which protects your standing warranty where applicable.
- 4
Installation. The replacement unit is set, shimmed, sealed, and flashed to shed water away from the wall, not into it.
- 5
Test and cleanup. We operate the window, check for drafts and water intrusion, and leave the space clean.
- 6
The guarantee. Every job carries our 365-Day Done Right Promise. If it’s not right, we make it right. Repairs include a written guarantee, and if a repair fails, the second visit is free.
What Therma-Tru Window Replacement Costs in Enterprise
Real ranges, not teasers. Your exact price depends on size, glass package, and whether we’re replacing the full frame or an insert unit.
| Job | Typical range |
|---|---|
| Insert window replacement (reuse existing frame) | $450 – $850 per window |
| Full frame replacement | $900 – $1,600 per window |
| Energy-efficient glass upgrade | $150 – $400 added per unit |
| Sidelite / door-glass IGU replacement | $300 – $700 |
| Targeted repair (seal, weatherstripping, hardware) | $150 – $400 |
What moves the price: window size, low-E glass (a thin coating that blocks heat while letting light through), whether the frame is sound, and how many units you do at once. Call (866) 616-0837 for a free estimate and a written price before work begins.
Why Enterprise Homeowners Call Hale Windows & Doors Enterprise for Therma-Tru Work
We’re independently owned and operated, part of the Threshold Group, and we’ve handled Therma-Tru since 2009. Our technicians have up to 17 years of experience on windows and doors. The written price is in your hands before any work starts, every time. The 365-Day Done Right Promise is stamped on every job. And the Threshold Standard means every technician is background-checked, identity-verified, photo-badged, and announced by name and photo before the visit, so you know who’s at the door. Our phone is answered by a live person around the clock. We also carry the depth to solve cross-brand jobs: PGT, CGI, CWS, ES Windows, and more.
FAQs
Not if it’s done correctly. We remove the old unit without damaging the surrounding frame and use the correct parts, which protects your standing Therma-Tru warranty where it applies. We’ll tell you upfront if a proposed job would affect coverage. Call (866) 616-0837 to talk through your situation.
Often, yes, especially for common hardware and glass units. When an OEM part is discontinued, we explain the quality-aftermarket alternative and let you decide. You’ll never be quoted a part we can’t actually source.
It depends on the failure. A failed seal or worn weatherstripping is usually a repair. A rotted sill or a warped sash is usually a replacement. Our diagnostic visit makes the call on evidence, and the estimate is free.
Most jobs are scheduled within one to two weeks of your estimate, since replacement is planned work. If you have an active leak through a failed unit, tell us when you call so we can prioritize it.
We come back. That’s the 365-Day Done Right Promise: if the work isn’t right, we make it right, and every repair carries a written guarantee with a free second visit if it fails. Call (866) 616-0837 for your free estimate.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.