New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Impact Garage Doors: The Enterprise Owner’s Guide
If you’re replacing a Mr-Glass impact garage door in Enterprise, NV, expect a typical installed price of $2,400 to $5,800 depending on door width, wind-load rating, and whether the opener needs work. Most residential swaps are done in a single day once the door is ordered and delivered. Owners usually start this search the day the door stops closing flush, one panel dents and sags against the track, or they notice daylight running dark under the bottom section after the first hot stretch of the year.

We install and service Mr-Glass impact doors alongside PGT, CGI, and CWS products, and we tell every Enterprise homeowner the same thing up front: the brand of the door matters less than whether the wind-load rating matches what your home needs under local code. That’s the detail that decides how long the door actually holds up against a monsoon.
Which Mr-Glass Models This Applies To
Mr-Glass impact garage doors come in two general constructions you’ll run into: a single-skin steel or aluminum panel door and a heavier multi-panel sectional with reinforced rails. Your model identification is usually stamped on a label on the inside face of the top section, or on a plate near the opener rail. Look for the series code, the width and height, the wind-load rating, and the panel thickness. If the label is gone, measure the opening inside the jamb and the panel height – Enterprise doors commonly run between 7 and 8 feet tall and 8 to 16 feet wide depending on bay count.
Here’s the compatibility gotcha that catches most owners: Mr-Glass rails, rollers, and hinge brackets for the reinforced impact series are not interchangeable with the lighter standard series, even on doors of the same width. The track gauge is thicker on the impact version and the roller stem length is different. Order a standard-series replacement roller for an impact door and it will sit loose in the track and rattle within weeks.
The OEM-versus-aftermarket call is straightforward for Mr-Glass. For load-bearing rails, springs, and cables, use OEM or a certified equivalent matched to the impact rating – do not substitute a lighter-duty part. For rollers, hinges, and weather seal, a quality aftermarket equivalent is fine and often costs less. We quote parts and labor as separate lines so you can see exactly what you’re paying for.
We’re an independent service provider and not affiliated with Mr-Glass. That means we match the right part to your door rather than pushing whatever sits in a warehouse.
Signs Your Mr-Glass Impact Garage Doors Is Failing
Garage doors rarely fail without warning. In Enterprise, the schedule is different from wetter parts of the valley – our dry heat does more damage to seals and rollers than rain does. Watch for this list:
- The door sags on one side: A stretched spring or a worn cable on that side has lost tension, usually after the first summer it cycles unevenly. This is the failure owners notice first.
- A loud bang from the garage: That’s a torsion spring breaking, not a hinge. It happens more often in our heat once the spring has seen its cycle life.
- Rollers that screech or leave black marks on the track: The roller bearings have dried out or the steel roller has flat-spotted, and it’s grinding the track gauge thinner every time the door moves.
- Daylight or dust at the bottom seal: The bottom weather seal has cracked and hardened under our UV load, so the door no longer seals against the wind and insulation goes with it.
- The door reverses or stops partway: A worn safety sensor or a binding track is telling the opener to back off – a sign the door is straining against its own hardware.
Replacement Cost & What’s Included
Here’s what Enterprise homeowners should expect for a Mr-Glass impact garage door replacement, quoted as installed:

- Single-car impact door, installed: $1,800 to $3,200
- Two-car impact door, installed: $2,400 to $5,800
- Reinforced impact series with upgraded wind rating: add roughly $400 to $1,200
- Opener replacement or rebalance: $250 to $900 on top
- Track and hardware repair (no new door): $180 to $650
What drives the range: door size, wind-load rating, panel material, whether the existing opener is compatible, and whether the old door comes out clean or the frame needs repair. We write your price before any work starts, and every repair carries a written guarantee – if the repair fails, the second visit is free. Under our 365-Day Done Right Promise, if the work isn’t right, we make it right.
DIY or Call Us?
High-tension garage door springs, torsion assemblies, and cables are dangerous to touch, and every professional door tech will tell you the same thing: a loaded torsion spring can cause serious injury in a fraction of a second if it releases wrong. We don’t give step-by-step instructions for spring, cable, or track work – that isn’t caution talk, it’s the honest limit of what a homeowner should do.
What you can safely check: whether the bottom seal is cracked, whether the rollers are loose in the track, whether the safety sensors align, and whether the door clears the frame evenly. Beyond that, call us.
When you call, you get a live person any hour of the day or night, and before anyone comes to your home, they’re background-checked, identity-verified, photo-badged, and introduced to you by name and photo. Call (866) 616-0837 and we’ll tell you exactly what a fix will run.
FAQs
The door itself should last 20 to 30 years, but the moving parts – springs, rollers, and seals – give you a shorter window. In our heat, expect springs to need replacement somewhere around 7 to 12 years with regular cycling, and the bottom weather seal to go sooner. Call (866) 616-0837 for a free estimate on the parts you need.
Often yes. A sagging door, a worn roller, a failed seal, or a single bent section can usually be repaired rather than replaced, and we’ll tell you honestly when repair is the right call. We only recommend a full replacement when the panel or wind-rating structure is compromised. Call (866) 616-0837 to find out which side of that line your door is on.
A full door replacement usually takes one day once the door is delivered, and a parts-only repair takes a couple of hours. Track and hardware work can run longer if the frame needs repair. We give you a written price before work starts so the timeline and cost are both clear.
We match the part to your specific door model and wind-load rating, then source OEM or a certified equivalent for the load-bearing hardware – never a lighter-duty substitute. We don’t claim to stock parts ourselves; we get the right part for your door. Call (866) 616-0837 to get started.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.