A Hale company - serving Enterprise, NV
M

Mr-Glass Window Installation in Enterprise, NV

New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.

1

Choose your installer

The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.

Talk to a real person →

2

Select the right products

Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.

Compare the lines →

3

Prepare your home for install

Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.

Get the install checklist →

Compare the Lines We Quote

Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.

PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
  • More impact certifications than any other line we quote
  • WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
  • 99% on-time delivery keeps your install date on the calendar
See it quoted on your openings →
CGIThe heavyweight impact line$$$$$
  • Large-missile impact ratings for the strictest wind zones
  • Architectural-grade aluminum with commercial-depth frames
  • The line we quote when protection is the whole point
See it quoted on your openings →
CWSThe value pick$$
  • Vinyl systems built to strict wind codes
  • Strong energy packages at the friendliest price point
  • The smart start for whole-home replacements on a budget
See it quoted on your openings →
ESWSlim lines, big glass$$$$
  • Narrow-sightline aluminum for modern elevations
  • Oversized openings and floor-to-ceiling glass
  • Impact-rated without the bunker look
See it quoted on your openings →
ECOThe aluminum impact workhorse$$$
  • Factory-built aluminum impact systems
  • A strong price-to-protection ratio for coastal homes
  • Proven lines with short lead times
See it quoted on your openings →

Mr-Glass Window Installation: The Enterprise Owner’s Guide

Mr-Glass window installation in Enterprise typically runs $420 to $1,150 per window installed, depending on frame material, glass package, and whether the opening needs reframing; most single-window swaps are completed in a few hours once the unit is on site. You’re usually reading this page because something already went wrong: a fogged pane you can’t see through, a sash that won’t slide, water staining the drywall under the frame after a monsoon. That’s the moment Enterprise homeowners start hunting for a straight answer on what a real Mr-Glass replacement costs and who should install it.

Professional front door replacement with modern black door frame in Enterprise, NV

Call (866) 616-0837

Which Mr-Glass Models This Applies To

Mr-Glass builds across several product families, and the part that matters most isn’t the glass – it’s the frame series and the rough opening. Aluminum single-hung and horizontal slider units from the builder-grade lines are the most common in Enterprise tract homes built through the 1990s and 2000s, while newer vinyl double-hung and casement lines show up in the master-planned neighborhoods off Horizon Ridge and around the Equestrian Drive corridor. Before anything gets ordered, we confirm three things: the manufacturer label on the upper sash channel or the head jamb (it lists the series code and glass designation), the exact rough opening measured in three places per side, and the glass package stamped on the spacer – typically a low-E coating (a thin metallic layer that blocks solar heat while letting visible light through) paired with argon fill. Skip the label and you’ll order a unit that’s a quarter-inch off and won’t seat.

OEM versus aftermarket is a real decision for Mr-Glass specifically. OEM sashes match the original extrusion profile and color lot, which matters if you’re replacing one window in a visible row. A quality aftermarket equivalent from a professional line can cost 15 to 25 percent less and perform the same on glass and hardware, but the frame profile won’t match a neighboring OEM unit exactly. We install Mr-Glass along with PGT, CGI, and CWS, so we can tell you honestly which path makes sense for your wall – and we’re an independent service provider, not affiliated with Mr-Glass.

Signs Your Mr-Glass Window Installation Is Failing

Enterprise sits in a high-desert climate that swings from 105°F summer afternoons to below-freezing winter nights, and that thermal cycling is what breaks window assemblies here faster than in milder markets. Watch for these five:

  • Fogging or condensation between the panes. The sealed insulated glass unit (IGU) has lost its argon and its desiccant is saturated. Once the seal fails, the unit won’t clear – it needs replacement, not cleaning.
  • Water intrusion or staining at the interior sill. Failed perimeter sealant or a missing head flashing lets monsoon-driven rain past the frame. In Enterprise we regularly see this on west-facing walls where UV has cooked the original caulk joint brittle.
  • A sash that sticks, drags, or won’t latch. Usually a worn balance, a failed tilt-pivot, or a frame that’s racked slightly out of square. Sometimes it’s the operator hardware; sometimes the whole unit has shifted.
  • Draftiness or a rattling frame in wind. Weatherstripping has compressed flat, or the frame wasn’t shimmed and anchored properly at install. Poor anchoring is a common failure in older installs and shows up as gaps at the corners.
  • Condensation on the interior glass surface in winter. That points to a failing seal combined with interior humidity – a sign the unit’s thermal performance has degraded and it’s time to price a replacement.

Replacement Cost & What’s Included

Installed pricing for Mr-Glass and comparable professional lines in Enterprise breaks down roughly like this:

Scope Typical Installed Range
Single fixed or picture window, standard size $420 – $680
Single-hung or slider, vinyl, standard size $550 – $850
Double-hung with low-E and argon $680 – $1,050
Casement or large custom unit $850 – $1,150+
Reframing or rough-opening correction (if needed) $150 – $400 add

The range is driven by size, glass package, frame material, and whether the opening is square. You get a written price in your hands before any work starts – parts and labor itemized, no surprise line on the invoice. Every install carries the 365-Day Done Right Promise: if it’s not right, we make it right. Glass and unit defects are covered by the manufacturer’s warranty; our labor and installation workmanship are covered by ours.

Professional front door replacement with modern black door frame in Enterprise, NV

DIY or Call Us?

You can safely measure your rough opening, photograph the manufacturer label, and check whether the fogging is between the panes or on the room-side surface. What you shouldn’t do is pull an existing unit out of a second-story wall or attempt to reset a frame that’s come out of square – window openings are structural, and a bad reinstall invites water intrusion into wall cavities that costs far more to fix than the window did. There’s no spring-tension or electrical hazard in a standard window swap, but lifting a full insulated unit, sealing a rough opening correctly, and flashing the head properly are jobs where experience matters. If you’re unsure whether your unit is repairable or needs a full replacement, call us at (866) 616-0837 – a trained technician will give you a straight answer and a written price.

FAQs

Why Impact

Six Reasons Homeowners Choose Hale Windows & Doors Enterprise

Storm Protection

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.

Energy Savings

Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.

Noise Reduction

Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.

Burglar Resistant

Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.

Year-Round Comfort

Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.

Property Value

A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.

Other Services

Other Hale Windows & Doors Enterprise Services

Reviews

What Neighbors Say About Hale Windows & Doors Enterprise

★★★★★

"Fogged double pane in the living room. They replaced the glass units only, not the whole frame, and saved me a lot."

RRaul C.
★★★★★

"Vetted installers make me feel better having them inside. They were respectful and cleaned up all the old caulk and debris."

HHank V.
★★★★★

"Replaced eight old aluminum windows. The crew showed ID, wore shoe covers, and finished the whole job in two days. House is quieter and warmer."

BBarbara N.
★★★★★

"Energy bills dropped noticeably after the replacement. Install was neat and trimmed properly."

GGabriela L.
Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (866) 616-0837
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Hale Windows & Doors Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch