New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Window Replacement in Enterprise: What to Know First
We provide independent Mr-Glass window replacement in Enterprise, and most full-frame replacements are completed in one to two days once the new units arrive on site. On a typical Enterprise home, you should expect to invest roughly $650 to $1,950 per window depending on series, glass package, and whether we’re doing a full-frame or insert replacement. We give you a written price before any work starts, and every install carries our 365-Day Done Right Promise.

This page is for Enterprise homeowners who already have Mr-Glass windows on the house and need to decide between repair and replacement, or who want a straight answer on cost before anyone knocks on the door. Call (866) 616-0837 and a live person picks up, day or night.
One thing to state plainly up front: we’re an independent Mr-Glass service provider. We’re not affiliated with or authorized by Mr-Glass. What we are is a windows-and-doors specialist that installs and services eight professional lines, and Mr-Glass is one of them.
How Mr-Glass Products Fail – and How We Fix Them
Mr-Glass windows hold up well in Enterprise’s high-desert swing between 100-plus-degree summers and sub-freezing winter mornings. The failures we see are specific, and they tend to repeat.
- Fogged dual-pane glass in the sliding series. A white haze between the panes means the seal has failed and moisture has gotten in. In Enterprise, we see this most on west- and south-facing units where afternoon sun bakes the spacer. There’s no way to dry out or clean a failed seal. We replace the insulated glass unit with a new one matched to the original thickness so the frame stays true.
- Sticky rollers and hard-sliding panels on horizontal sliders. Desert dust loads up the track and grinds the rollers flat. Most homeowners assume the whole window is done. Often it’s rollers and a track cleaning, and the sash is fine. When the roller housing has worn the frame channel oval, we replace the panel rather than keep re-rolling a damaged frame.
- Cracked or chalky vinyl frames. Years of UV exposure make vinyl brittle, and on older frames the corners can separate at the weld. A hairline crack at a corner is the tell. If the crack is at the weld, we replace the frame. Patching brittle vinyl never holds through an Enterprise summer.
- Failed weatherstripping and air leaks. The pile weatherstrip along the sash edge flattens over time, and you feel the draft on a windy spring day. We replace the weatherstrip and re-shim the sash so it seats against a fresh seal instead of a worn one.
- Failed locks and tilt-latch hardware. These are the parts that get the most hand contact. On a Mr-Glass unit where the manufacturer’s hardware is no longer available, we fit a quality aftermarket latch that meets the same hole pattern, so no drilling and no visible patch.
When we open up a Mr-Glass window, the diagnostic question is always frame or component. Most units we see in Enterprise can be saved at the component level. The ones that can’t are usually past the point where new glass and hardware would cost more than a fresh window.
Our Mr-Glass Window Replacement Process
- 1
Call or book a visit. A live person answers and we set a time. Before we arrive, you get the name and photo of the technician coming to your door, so you know who’s there before you open it.
- 2
On-site diagnosis. We measure every opening, check the frame for rot or weld cracks, and test each sash for operation. We identify the Mr-Glass series where we can and tell you whether the problem is glass, frame, or hardware.
- 3
Parts decision. We explain OEM versus quality aftermarket for the specific part. On a window where the OEM glass or hardware is discontinued, we tell you, show you the alternative, and put the choice in writing.
- 4
Written price. You get a line-item written quote before any work starts. Not a verbal number and not a range that grows later.
- 5
Install and test. We install, seal, and then operate every sash, tilt, lock, and screen. We check for air leaks and water shedding before we call it done.
- 6
Guarantee and cleanup. We walk the job with you, hand you the written guarantee, and haul away the old units and debris.
Every repair is backed by a written guarantee, and if a repair fails, the second visit is free.
What Mr-Glass Window Replacement Costs in Enterprise
Prices vary with series and glass package, but these are the honest ranges we quote in Enterprise.
| Job | Typical Range |
|---|---|
| Insert replacement (single window, existing frame reused) | $650 – $1,150 |
| Full-frame replacement (single window, new frame) | $1,100 – $1,950 |
| Energy-efficient glass upgrade (low-E coating, argon fill) | $150 – $400 add per window |
| Fogged insulated glass unit replacement | $280 – $520 |
| Hardware and weatherstrip service | $140 – $320 |
What moves the price most: full-frame versus insert, the glass package you choose, and whether the opening needs any framing repair. A whole-house order reduces the per-window labor. None of the ranges above include a surprise line at the end, because the written price is in your hands first. Call (866) 616-0837 for a free estimate and an exact quote.

Why Enterprise Homeowners Call Hale Windows & Doors Enterprise for Mr-Glass Work
We’re part of the Threshold Group family of home-service brands, and we’re independently owned and operated. Every technician who comes to your home is background-checked, identity-verified, uniformed, and photo-badged, and you get their name and photo before the visit. That’s the Threshold Standard, and it’s why homeowners who live alone or have young kids at home feel comfortable letting us in.
Our technicians have up to 17 years of experience, and they know Mr-Glass windows as one of eight lines we work with daily: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That range matters on a Mr-Glass job, because if your series is discontinued we can match the right product to the opening instead of forcing a part that doesn’t fit. You get a written price before work starts, a 365-Day Done Right Promise on the job, and a live person on the phone at any hour. In Enterprise, that combination is why homeowners call us back.
FAQs
Often yes, and when the OEM part is discontinued we can fit a quality aftermarket equivalent that matches the hole pattern and glass thickness. We tell you which parts are OEM, which are aftermarket, and put the choice in writing before we order anything. Call (866) 616-0837 to find out what’s available for your series.
Replacing a component with an aftermarket part can affect a manufacturer warranty on the part you replace, so we walk you through that before you decide. We’re an independent service provider and not affiliated with Mr-Glass, and we don’t claim to be. What we do back is our own work: a written guarantee on every repair, plus the 365-Day Done Right Promise on installs.
If the only problem is a failed glass seal, the insulated glass unit can usually be replaced for $280 to $520, which is far less than a new window. If the frame has cracked at a weld or the vinyl has gone brittle, replacement is the better value. We diagnose both on site and tell you honestly which you’re looking at.
A single window is typically a few hours, and a whole-house order is usually a one- to two-day job once the units arrive. We give you a written timeline with your price and stick to it. Call (866) 616-0837 to schedule your free estimate.
We book the next available visit and confirm the exact time with you, and you’ll know your technician’s name and photo before they arrive. Call (866) 616-0837 and a live person will set it up, any hour of the day.
Get Your Mr-Glass Windows Priced in Enterprise
Whether you’re looking at fogged glass, a drafty sash, or a whole-house replacement, the next step is a written price you can hold in your hand. Call Hale Windows & Doors Enterprise at (866) 616-0837 for a free estimate on your Mr-Glass windows. A live person answers, every day, and you’ll know exactly who’s coming and exactly what it costs before any work begins.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.