New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CWS Window Installation: The Enterprise Owner’s Guide
Replacing a failed CWS window in Enterprise usually runs $450 to $1,200 per opening installed, depending on series, glass package and whether the frame is sound enough to reuse. Most owners discover the problem the same way: a window that won’t latch cleanly, glass that fogs from the inside, or a frame that has started to drag against the sill. CWS makes solid products, but the desert climate around Enterprise pushes seals and hardware hard, and a part that lasted decades elsewhere can fail faster here. The repair is not about the brand being wrong. It’s about matching the right replacement to the series you actually have.

Which CWS Models This Applies To
CWS builds several residential lines, and the fit varies more than owners expect. Most Enterprise homes with CWS product are running single-hung and slider models from their builder-grade lines, with casement and fixed units on the larger front-facing openings. The model series is stamped on a label in the head jamb or the side of the sash, and the glass make-up is etched in a corner of the pane. Photograph both before you call anyone. We can’t order the right unit without them, and guessing wastes a week.
Here’s the compatibility gotcha that trips up homeowners shopping online: CWS has changed sash profiles and balance shoes across production runs, so a replacement sash that looks identical can be a quarter-inch off on the weatherstrip channel. On the OEM-versus-aftermarket question, OEM glass matched to your original frame is the safer call when the frame is sound, because the glazing bead and weep system were engineered together. Aftermarket equivalents make sense when the whole unit is coming out and the opening is being reset. Our technicians have up to 17 years of experience matching CWS units to existing openings. We’re an independent service provider and not affiliated with CWS, so the recommendation we give follows the opening, not a brand.
Signs Your CWS Window Installation Is Failing
- Fogging or condensation between the panes. The sealed glass unit has lost its argon and its desiccant is saturated. In Enterprise this shows up fastest on west and south elevations where afternoon sun loads the glass hardest.
- A window that won’t stay latched or lock. The sash has shifted on its hardware or the frame has racked slightly. This is often a whole-unit issue rather than a lock replacement.
- Dragging or hard operation. Dirt and grit in the track, or a balance that has lost tension, cause the sash to bind. Left alone, the friction wears the weatherstrip and the leak starts.
- Visible water staining on the interior sill or drywall. Water is getting past the perimeter seal or the weep system is blocked. This is the one to call on quickly, before the framing behind the drywall takes on moisture.
- Drafts or hot spots near the frame, not the glass. The perimeter seal or the glazing bead has failed. Glass that feels fine but a frame that radiates heat points to the seal, not the pane.
Enterprise sits in a high-desert pocket where the daily temperature swing does more damage to window seals than the peak heat does. Expansion and contraction work the perimeter sealant and the glazing bead a little every day, so a CWS unit that was tight at install can develop a slow leak over years. That’s the local reality, and it’s why we inspect seals first on any Enterprise call. Call (866) 616-0837 and we’ll tell you what we see.
Replacement Cost & What’s Included
These are installed ranges for Enterprise, with the unit and labor included:
- Single-hung CWS replacement, standard size: $450 to $750 per opening.
- Slider or casement, standard size: $600 to $950 per opening.
- Oversized or fixed unit with tempered glass: $800 to $1,200 per opening.
- Full-frame replacement with new opening prep and trim: add $200 to $400 per opening.
- Glass-only replacement when the frame is sound: $250 to $500 per opening.
The range moves with the series, the glass package and whether the opening needs re-flashing. You get a written price before any work starts, every time. Every installation carries the 365-Day Done Right Promise: if the work isn’t right, we make it right. No argument needed. Estimates are free, so call (866) 616-0837 for an exact quote on your CWS openings.

DIY or Call Us?
There’s real value in a homeowner checking a few things first. You can confirm the model label, photograph the glass etch, clear grit from the track with a vacuum and a soft brush, and test whether the sash racks by opening it halfway and watching the gap at the frame. That saves everyone time.
Where it goes wrong: the moment you start pulling a sash, resetting a glazing bead or touching the perimeter seal, you’re working with tempered glass and an opening that has to stay weathertight. A dropped sash or a cracked pane in a second-story opening is a genuine hazard, and a bad seal you can’t see will let water into the wall. That’s real work for a trained installer. If you’re unsure after your check, call (866) 616-0837. Our technicians are background-checked, identity-verified and photo-badged, and you’ll see their name and photo before they arrive.
FAQs
Most CWS windows hold their seal for 15 to 25 years, but in Enterprise’s high-desert climate the sun-facing units often run shorter. The daily temperature swing is the real culprit, and west and south elevations age faster than the rest of the house. If your unit is past 15 years and fogging, plan on replacement rather than repair. Call (866) 616-0837 for a free assessment.
Sometimes, yes. If the frame is sound and only the sealed glass unit has failed, glass-only replacement at $250 to $500 saves you the full-frame cost. If the sash has racked or the perimeter seal is gone, a full replacement is the honest answer. We tell you which applies after we look. Call (866) 616-0837 to schedule the visit.
A standard single-hung insert replacement takes about two to three hours per opening. Full-frame jobs with trim and flashing run a full day for one or two openings. We give you the timeline in writing with the price before we start. Call (866) 616-0837 for a scheduling estimate.
We match your CWS series and glass make-up from the labels and etchings you photograph, then order the unit built to that spec. We don’t carry parts on a truck, and we don’t claim to. The right unit is ordered for your opening. We install and service CWS alongside PGT, CGI, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru and ViewLux, so we match the product to the opening. Call (866) 616-0837 to get your CWS unit ordered.
Get Your Free CWS Estimate
Your CWS window doesn’t have to keep fogging, dragging or leaking. Call (866) 616-0837 for a free estimate. A live person answers, 24 hours a day, and you’ll get a written price before any work starts, backed by the 365-Day Done Right Promise. We’ll confirm the series, check the seal and tell you whether it’s a glass swap or a full replacement.
Written by the team at Hale Windows & Doors Enterprise, serving Enterprise and nearby areas.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.