A Hale company - serving Enterprise, NV

CGI Sliding & Patio Doors in Enterprise, NV

New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.

1

Choose your installer

The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.

Talk to a real person →

2

Select the right products

Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.

Compare the lines →

3

Prepare your home for install

Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.

Get the install checklist →

Compare the Lines We Quote

Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.

PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
  • More impact certifications than any other line we quote
  • WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
  • 99% on-time delivery keeps your install date on the calendar
See it quoted on your openings →
CGIThe heavyweight impact line$$$$$
  • Large-missile impact ratings for the strictest wind zones
  • Architectural-grade aluminum with commercial-depth frames
  • The line we quote when protection is the whole point
See it quoted on your openings →
CWSThe value pick$$
  • Vinyl systems built to strict wind codes
  • Strong energy packages at the friendliest price point
  • The smart start for whole-home replacements on a budget
See it quoted on your openings →
ESWSlim lines, big glass$$$$
  • Narrow-sightline aluminum for modern elevations
  • Oversized openings and floor-to-ceiling glass
  • Impact-rated without the bunker look
See it quoted on your openings →
ECOThe aluminum impact workhorse$$$
  • Factory-built aluminum impact systems
  • A strong price-to-protection ratio for coastal homes
  • Proven lines with short lead times
See it quoted on your openings →

CGI Sliding & Patio Doors: The Enterprise Owner’s Guide

We install and service CGI sliding and patio doors for Enterprise homeowners, with typical full door replacement running $2,400 to $5,800 depending on size, glass package, and frame series, and most part-level repairs landing between $185 and $520. Once a CGI slider starts fighting you on the track, dragging the latch, or fogging between the panes, the likely culprit is a worn roller, a failed weather seal, or a broken multi-point lock – and in Enterprise, the desert heat and wind-blown dust speed up all three. You’ll usually know it’s time when the door won’t close flush without a shoulder push, or you feel the heat pouring in along the jamb on a July afternoon. Call (866) 616-0837 for a free estimate and we’ll tell you straight whether you need a part or a whole door.

Modern corner window installation in a contemporary bedroom overlooking scenic greenery in Enterprise, NV

Call (866) 616-0837

Which CGI Models This Applies To

CGI makes a broad range of aluminum and vinyl sliders and patio doors sold across the Southwest, and the parts don’t cross series cleanly. A roller that fits a CGI vinyl slider isn’t the same as the tandem roller used on the larger aluminum patio door, and the lock hardware varies by frame profile even within the same product family. Before we quote a part, we identify the door two ways: the manufacturer label, usually on the top or side of the operating panel or inside the head jamb, and actual measurements – panel width, height, glass thickness, and track depth. Those measurements matter more than the model name because CGI has revised profiles over the years and older doors in Enterprise still carry parts for an original configuration.

We treat OEM and quality aftermarket parts as a real decision, not a sales pitch. Where a genuine CGI part is still available, we’ll quote it. Where it isn’t, or where a steel-ball-bearing aftermarket roller is measurably better than the original, we’ll say so. We’re an independent service provider, not affiliated with CGI, so our recommendation is based on what lasts in Southern Nevada, not on pushing a brand.

Signs Your CGI Sliding & Patio Doors Is Failing

Sliders fail in predictable ways. Here’s what to watch for and what’s usually behind it.

  • The door drags or needs a lift to slide. That’s almost always a flattened or seized roller. Once the ball bearings are shot, the panel grinds on the track and the problem gets worse fast.
  • It won’t latch or lock without force. The multi-point lock or latch strike has drifted out of alignment, often because the panel has sagged or the roller height has slipped.
  • You feel hot air or see daylight around the edges. The weatherstripping and pile seal have compressed and dried out – a real issue in Enterprise’s low-humidity climate, where seals harden years faster than they do in coastal markets.
  • Fog or condensation between the glass panes. The insulated glass unit’s seal has failed and moisture is trapped inside. This one isn’t repairable at the glass unit level – the IGU gets replaced.
  • The track is pitted, bent, or full of grit. Desert dust and wind-driven sand wear the track and clog the rollers. A worn track makes every other part work harder.

Replacement Cost & What’s Included

Here’s roughly what Enterprise homeowners can expect, part and labor together, with a written price before we start.

Job Typical installed range
Roller replacement (per panel) $185 – $320
Multi-point lock or latch hardware $220 – $420
Weatherstripping and seal replacement $185 – $380
Insulated glass unit (IGU) replacement $420 – $900+
Full CGI slider replacement $2,400 – $5,800

What drives the number: panel size and glass type, whether the track needs repair, and OEM versus aftermarket parts. You get the price in writing before any tool comes out, and every repair carries a written guarantee – if the repair fails, a second visit is free. We’re also covered by the 365-Day Done Right Promise: if the work isn’t right, we make it right.

DIY or Call Us?

Some checks are safe to do yourself. You can clean the track with a vacuum and a stiff brush, wipe the rollers where you can reach them, and try adjusting the roller height screw a quarter turn at a time to see if the panel lifts free. If a latch is loose, tightening visible screws is fine.

What we don’t recommend is dismounting a large glass panel to swap rollers or hardware. Sliding and patio door panels are heavy, glass is unforgiving, and a dropped panel is a hospital visit or a shattered door. Multi-point lock mechanisms also need correct alignment, which is hard to hit by feel. One honest note: 17 years of doing this in Southern Nevada is mostly learning where the shortcuts go wrong. If the door is dragging, fogging, or won’t latch, call (866) 616-0837 and let’s diagnose it properly.

FAQs

Why Impact

Six Reasons Homeowners Choose Hale Windows & Doors Enterprise

Storm Protection

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.

Energy Savings

Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.

Noise Reduction

Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.

Burglar Resistant

Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.

Year-Round Comfort

Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.

Property Value

A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.

Other Services

Other Hale Windows & Doors Enterprise Services

Reviews

What Neighbors Say About Hale Windows & Doors Enterprise

★★★★★

"Fogged double pane in the living room. They replaced the glass units only, not the whole frame, and saved me a lot."

RRaul C.
★★★★★

"Vetted installers make me feel better having them inside. They were respectful and cleaned up all the old caulk and debris."

HHank V.
★★★★★

"Replaced eight old aluminum windows. The crew showed ID, wore shoe covers, and finished the whole job in two days. House is quieter and warmer."

BBarbara N.
★★★★★

"Energy bills dropped noticeably after the replacement. Install was neat and trimmed properly."

GGabriela L.
Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (866) 616-0837
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Hale Windows & Doors Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch