New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows & Doors Enterprise pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Why Enterprise Homeowners Choose CGI Windows & Doors
We provide independent CGI windows and doors service in Enterprise, and what sets our CGI work apart is that our technicians treat the brand’s impact-rated frames, sash hardware and glazing systems as their own category rather than as generic vinyl. Most CGI problems in Enterprise come down to sun-driven seal failure, flattened slider rollers and hairline welds at the miter, and our technicians have up to 17 years of experience diagnosing exactly which of those you’re facing. To be clear: Hale Windows & Doors Enterprise is an independent CGI service provider. We are not affiliated with, sponsored by or authorized by CGI. We work on the brand because we know it well, not because the manufacturer sent us. Call (866) 616-0837 and a live person answers, day or night.

Why Trust Hale Windows & Doors Enterprise for Your CGI Windows & Doors?
CGI units have quirks that a generic window tech tends to miss. The glazing bead on an impact-rated CGI sash is engineered to hold the glass under load, and if it’s re-seated with the wrong profile the sealant cracks and desert air starts moving past the sash. Our technicians know that difference, and they’re trained to inspect the weld at the corner miter before anything else, because a sun-cracked weld changes the whole repair decision.
We source OEM CGI parts whenever the specific roller, operator, bead or weatherstrip is still in production, and we match duty-rated aftermarket parts only where the OEM path is closed. Every job starts with a written price in your hands before a tool comes out, and every repair carries a written guarantee. If the repair fails, a second visit is free. We also back all work with the 365-Day Done Right Promise: if it isn’t right, we make it right, no argument needed.
Before anyone rings your doorbell, you’ll get the technician’s name and photo through the Threshold Standard, which means every tech is background-checked, identity-verified, photo-badged and pre-announced. That matters for a brand service call, where the person at the door is a stranger you’ve never met and is about to spend time inside your home. Hale Windows & Doors Enterprise is independently owned and operated, part of the Threshold Group family, and we’ve been in business as Hale since 2009.
Common CGI Windows & Doors Problems We Fix in Enterprise
The failure modes below are the ones we see most often on CGI product in the Las Vegas Valley, and each one has a specific cause worth understanding before you call anyone.
- Glazing bead and weatherstrip separation on impact-rated units. After enough heat cycles, the glazing bead on a CGI Sentinel impact single hung or double hung starts lifting at the edge, and the weatherstrip behind it pulls away from the sash. Once that happens, the factory sealant cracks and air and water move past the sash on the next wind event. The repair is bead and weatherstrip replacement with the correct profile, not a smear of caulk.
- Roller and track wear on CGI horizontal roller and 3-lite slider windows. The rollers on these units flatten under a decade of UV exposure and dust, the track fills with grit, and the sash drags, jumps the track or refuses to latch. The fix is duty-rated replacement rollers plus a full track clean and realignment, not brute force on the latch.
- Corner weld and frame seal failure on vinyl frames. Vinyl exposed to intense southern Nevada sun expands and contracts daily, and the stress shows up as a hairline crack at the corner miter or as fogged insulating glass. A cracked weld is a frame problem; fogged glass is a sealed-unit problem. They’re different calls and different prices.
- Casement and awning operator misalignment. When a CGI casement or awning crank binds or the sash no longer closes flush, the operator arm or the hinge is usually worn, and the fix is an operator replacement. A crank that suddenly resists is telling you something the frame needs, and forcing it makes it worse.
- Multi-point lock misalignment on impact entry doors and French door systems. On a CGI impact entry door, the multi-point lock stops engaging fully when the door slab has shifted slightly in the heat. The lock isn’t always the problem; often the hinges or the strike plate alignment need correction first.
CGI Parts & Our Repair-vs-Replace Approach
Parts sourcing for CGI work is honest math, not guesswork. When we can get the OEM CGI sash hardware, roller, glazing bead or weatherstrip for your specific series, that’s the default, because an OEM part keeps your frame warranty and fit intact. For older or discontinued CGI units, we match duty-rated aftermarket rollers, operators and seal kits to the actual weight and profile of the sash rather than forcing a generic part that will fail again in two summers. We do not stock CGI parts locally. Your part gets sourced for your specific unit after diagnosis, which is why the first step is always a visit, not a sales pitch.
Here’s where we’re honest about repair versus replacement. If the frame and welds are sound, replacing the sash or the insulated glass unit is the right call, and it costs less. If the vinyl frame is cracked at a corner, bowed, or the profile is discontinued with no parts path, we’ll tell you plainly that a full-frame replacement is the only answer that won’t fail again. Every job gets a written price before work begins. Call (866) 616-0837 for a free estimate and we’ll show you which side of that line your CGI unit is on.
Our CGI Service Process – Step by Step
Every CGI job in Enterprise runs through the same four steps so there are no surprises on the invoice.
- 1
Diagnosis. A Threshold Verified technician inspects the weld at the corner miter, the glazing bead and weatherstrip, the rollers or operator, and the frame for bow or crack. You get a written report on what’s failing and why before any repair decision.
- 2
Repair or install. OEM parts whenever available. For impact-rated CGI units, bead and weatherstrip are re-seated with the correct profile so the sealant cures against the right surface. For slider windows, rollers are replaced with duty-rated parts and the track is cleaned and realigned. Every step happens only after you’ve signed off on the written price.
- 3
Test. We move the sash through its full cycle, check the latch or lock engagement and run a water and air seal check on impact units before we leave. If something doesn’t sit right, we fix it before we call the job done.
- 4
Warranty. Every repair carries a written guarantee. If the same repair fails, a second visit is free. All work also falls under the 365-Day Done Right Promise.
CGI Products We Service & Install in Enterprise
Our CGI coverage spans the series Enterprise homeowners actually have on their homes, including the impact-rated and non-impact lines installed across the valley’s tract subdivisions.
- CGI Sentinel impact-rated vinyl single hung and double hung series
- CGI horizontal roller and 3-lite slider vinyl windows
- CGI casement, awning and hopper vinyl series
- CGI impact entry door and French door systems
Whether it’s a single failed sliders sash on a 2000s stucco tract home or a full set of CGI double hung units that have hit their fogging years, we diagnose the specific series and quote the specific part or glass unit. If you’re not sure which CGI series you have, the model is usually printed on a label in the frame channel or the glass edge. We’ll confirm it at the visit.
We Also Service These Brands
Hale Windows & Doors Enterprise is a multi-brand specialist, not a single-brand shop. Alongside CGI, we install and service PGT, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru and ViewLux, eight professional-grade lines in all. That matters if your street mixes builder-grade brands, or if a neighbor’s replacement pulled you toward a different product for an ADU or an HOA-approved exterior change. We’ll match the right line to the job instead of steering you back to one brand.
FAQs – CGI Windows & Doors Service in Enterprise
Yes, an impact CGI unit can be repaired when the frame and corner welds are sound. The repairable cases are glazing bead and weatherstrip separation, worn rollers on slider units, and fogged sealed glass units, all of which can be fixed without replacing the whole window. The replacement-only case is a cracked corner weld, a bowed frame, or a discontinued profile with no parts path. A technician has to see the unit to tell you which one you have. Call (866) 616-0837 for a free estimate.
Your CGI horizontal roller windows jump the track because the bottom rollers have flattened under years of UV and dust, letting the sash drop slightly out of alignment. The track filling with grit makes it worse, and once the sash sits low, the latch won’t engage either. The fix is duty-rated replacement rollers plus a track clean and realignment, not a stronger pull. Call (866) 616-0837 for an appointment and we’ll confirm the cause at the visit.
Fogging between the panes on CGI double hung windows is seal failure in the insulated glass unit, meaning the factory edge seal has failed and moisture has entered the air space between the panes. Desert heat cycling and intense south- and west-facing sun load drive desiccant saturation and crack the edge seal over time. The glass unit gets replaced; the frame usually stays. When a glass unit fails, call (866) 616-0837 for a free estimate on a replacement IGU.
Yes, CGI casement and awning operators wear out, most commonly when the crank arm binds or the sash stops closing flush against the frame. The operator arm and hinge hardware take the load every time the window opens, and the heat and dust accelerate the wear. An operator replacement restores smooth operation; forcing a binding crank can bend the sash. Call (866) 616-0837 to schedule a visit.
No, Hale Windows & Doors Enterprise is an independent CGI service provider and is not authorized, affiliated with or sponsored by CGI. We work on CGI product because our technicians know the brand’s frame, sash and hardware systems, and we source OEM parts whenever they’re available, but the manufacturer has not certified or endorsed our work. Call (866) 616-0837 to talk through your CGI issue.
CGI service in Enterprise typically runs from $95 to $180 for a diagnostic visit, $140 to $320 for slider roller and track service, $220 to $520 per glass unit for a replaced IGU on a double hung window, $180 to $380 for an operator replacement on a casement or awning unit, and $480 to $1,400 and up per opening for a full-frame impact replacement. Those ranges are for the Enterprise market and vary with series, glass type and access. Call (866) 616-0837 for an exact written quote before any work begins – estimates are free.
Book Your CGI Service in Enterprise, NV
Whether it’s one dragging CGI slider or a full set of impact windows that have reached their fogging years, Hale Windows & Doors Enterprise will give you a written price before any work starts, send a tech you know by name and photo, and stand behind the repair under the 365-Day Done Right Promise. Call (866) 616-0837 for a free estimate.
Written by the team at Hale Windows & Doors Enterprise.
Six Reasons Homeowners Choose Hale Windows & Doors Enterprise
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.